linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Sasha Levin <sashal@kernel.org>,
	linux-gpio@vger.kernel.org
Subject: [PATCH AUTOSEL 4.14 091/103] pinctrl: at91: don't use the same irqchip with multiple gpiochips
Date: Fri,  8 Nov 2019 06:42:56 -0500	[thread overview]
Message-ID: <20191108114310.14363-91-sashal@kernel.org> (raw)
In-Reply-To: <20191108114310.14363-1-sashal@kernel.org>

From: Ludovic Desroches <ludovic.desroches@microchip.com>

[ Upstream commit 0c3dfa176912b5f87732545598200fb55e9c1978 ]

Sharing the same irqchip with multiple gpiochips is not a good
practice. For instance, when installing hooks, we change the state
of the irqchip. The initial state of the irqchip for the second
gpiochip to register is then disrupted.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-at91.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 569bc28cb9097..404711f0985aa 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1566,16 +1566,6 @@ void at91_pinctrl_gpio_resume(void)
 #define gpio_irq_set_wake	NULL
 #endif /* CONFIG_PM */
 
-static struct irq_chip gpio_irqchip = {
-	.name		= "GPIO",
-	.irq_ack	= gpio_irq_ack,
-	.irq_disable	= gpio_irq_mask,
-	.irq_mask	= gpio_irq_mask,
-	.irq_unmask	= gpio_irq_unmask,
-	/* .irq_set_type is set dynamically */
-	.irq_set_wake	= gpio_irq_set_wake,
-};
-
 static void gpio_irq_handler(struct irq_desc *desc)
 {
 	struct irq_chip *chip = irq_desc_get_chip(desc);
@@ -1616,12 +1606,22 @@ static int at91_gpio_of_irq_setup(struct platform_device *pdev,
 	struct gpio_chip	*gpiochip_prev = NULL;
 	struct at91_gpio_chip   *prev = NULL;
 	struct irq_data		*d = irq_get_irq_data(at91_gpio->pioc_virq);
+	struct irq_chip		*gpio_irqchip;
 	int ret, i;
 
+	gpio_irqchip = devm_kzalloc(&pdev->dev, sizeof(*gpio_irqchip), GFP_KERNEL);
+	if (!gpio_irqchip)
+		return -ENOMEM;
+
 	at91_gpio->pioc_hwirq = irqd_to_hwirq(d);
 
-	/* Setup proper .irq_set_type function */
-	gpio_irqchip.irq_set_type = at91_gpio->ops->irq_type;
+	gpio_irqchip->name = "GPIO";
+	gpio_irqchip->irq_ack = gpio_irq_ack;
+	gpio_irqchip->irq_disable = gpio_irq_mask;
+	gpio_irqchip->irq_mask = gpio_irq_mask;
+	gpio_irqchip->irq_unmask = gpio_irq_unmask;
+	gpio_irqchip->irq_set_wake = gpio_irq_set_wake,
+	gpio_irqchip->irq_set_type = at91_gpio->ops->irq_type;
 
 	/* Disable irqs of this PIO controller */
 	writel_relaxed(~0, at91_gpio->regbase + PIO_IDR);
@@ -1632,7 +1632,7 @@ static int at91_gpio_of_irq_setup(struct platform_device *pdev,
 	 * interrupt.
 	 */
 	ret = gpiochip_irqchip_add(&at91_gpio->chip,
-				   &gpio_irqchip,
+				   gpio_irqchip,
 				   0,
 				   handle_edge_irq,
 				   IRQ_TYPE_NONE);
@@ -1650,7 +1650,7 @@ static int at91_gpio_of_irq_setup(struct platform_device *pdev,
 	if (!gpiochip_prev) {
 		/* Then register the chain on the parent IRQ */
 		gpiochip_set_chained_irqchip(&at91_gpio->chip,
-					     &gpio_irqchip,
+					     gpio_irqchip,
 					     at91_gpio->pioc_virq,
 					     gpio_irq_handler);
 		return 0;
-- 
2.20.1


      parent reply	other threads:[~2019-11-08 11:56 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20191108114310.14363-1-sashal@kernel.org>
2019-11-08 11:41 ` [PATCH AUTOSEL 4.14 019/103] pinctrl: ingenic: Probe driver at subsys_initcall Sasha Levin
2019-11-08 11:42 ` [PATCH AUTOSEL 4.14 084/103] pinctrl: at91-pio4: fix has_config check in atmel_pctl_dt_subnode_to_map() Sasha Levin
2019-11-08 11:42 ` Sasha Levin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191108114310.14363-91-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ludovic.desroches@microchip.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).