From: Kent Gibson <warthog618@gmail.com>
To: linux-gpio@vger.kernel.org, bgolaszewski@baylibre.com
Cc: Kent Gibson <warthog618@gmail.com>
Subject: [libgpiod][PATCH v4 13/20] bindings: python: tests: add tests for SET_CONFIG methods
Date: Sun, 1 Dec 2019 11:24:00 +0800 [thread overview]
Message-ID: <20191201032407.23589-14-warthog618@gmail.com> (raw)
In-Reply-To: <20191201032407.23589-1-warthog618@gmail.com>
Extend test coverage over set_config, set_flags, set_direction_input, and
set_direction_output methods.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
---
bindings/python/tests/gpiod_py_test.py | 163 +++++++++++++++++++++++++
1 file changed, 163 insertions(+)
diff --git a/bindings/python/tests/gpiod_py_test.py b/bindings/python/tests/gpiod_py_test.py
index 744bbfe..fd38bb9 100755
--- a/bindings/python/tests/gpiod_py_test.py
+++ b/bindings/python/tests/gpiod_py_test.py
@@ -493,6 +493,169 @@ class LineValues(MockupTestCase):
line.set_value(0)
self.assertEqual(mockup.chip_get_value(0, 3), 1)
+class LineConfig(MockupTestCase):
+
+ chip_sizes = ( 8, )
+
+ def test_set_config_direction(self):
+ with gpiod.Chip(mockup.chip_name(0)) as chip:
+ line = chip.get_line(3)
+ line.request(consumer=default_consumer,
+ type=gpiod.LINE_REQ_DIR_IN)
+ self.assertEqual(line.direction(), gpiod.Line.DIRECTION_INPUT)
+ line.set_config(gpiod.LINE_REQ_DIR_IN, 0, 0)
+ self.assertEqual(line.direction(), gpiod.Line.DIRECTION_INPUT)
+ line.set_config(gpiod.LINE_REQ_DIR_OUT,0,0)
+ self.assertEqual(line.direction(), gpiod.Line.DIRECTION_OUTPUT)
+
+ def test_set_config_flags(self):
+ with gpiod.Chip(mockup.chip_name(0)) as chip:
+ line = chip.get_line(3)
+ line.request(consumer=default_consumer,
+ type=gpiod.LINE_REQ_DIR_OUT)
+ line.set_config(gpiod.LINE_REQ_DIR_OUT,
+ gpiod.LINE_REQ_FLAG_ACTIVE_LOW, 0)
+ self.assertEqual(mockup.chip_get_value(0, 3), 1)
+ line.set_config(gpiod.LINE_REQ_DIR_OUT, 0, 0)
+ self.assertEqual(mockup.chip_get_value(0, 3), 0)
+
+ def test_set_config_output_value(self):
+ with gpiod.Chip(mockup.chip_name(0)) as chip:
+ line = chip.get_line(3)
+ line.request(consumer=default_consumer,
+ type=gpiod.LINE_REQ_DIR_IN)
+ line.set_config(gpiod.LINE_REQ_DIR_OUT,0,1)
+ self.assertEqual(mockup.chip_get_value(0, 3), 1)
+ line.set_config(gpiod.LINE_REQ_DIR_OUT,0,0)
+ self.assertEqual(mockup.chip_get_value(0, 3), 0)
+
+ def test_set_config_output_no_value(self):
+ with gpiod.Chip(mockup.chip_name(0)) as chip:
+ line = chip.get_line(3)
+ line.request(consumer=default_consumer,
+ type=gpiod.LINE_REQ_DIR_OUT,
+ default_val=1)
+ self.assertEqual(mockup.chip_get_value(0, 3), 1)
+ line.set_config(gpiod.LINE_REQ_DIR_OUT,0)
+ self.assertEqual(mockup.chip_get_value(0, 3), 0)
+
+ def test_set_config_bulk_output_no_values(self):
+ with gpiod.Chip(mockup.chip_name(0)) as chip:
+ lines = chip.get_lines(( 0, 3, 4, 6 ))
+ lines.request(consumer=default_consumer,
+ type=gpiod.LINE_REQ_DIR_OUT,
+ default_vals=(1,1,1,1))
+ self.assertEqual(mockup.chip_get_value(0, 0), 1)
+ self.assertEqual(mockup.chip_get_value(0, 3), 1)
+ self.assertEqual(mockup.chip_get_value(0, 4), 1)
+ self.assertEqual(mockup.chip_get_value(0, 6), 1)
+ lines.set_config(gpiod.LINE_REQ_DIR_OUT,0)
+ self.assertEqual(mockup.chip_get_value(0, 0), 0)
+ self.assertEqual(mockup.chip_get_value(0, 3), 0)
+ self.assertEqual(mockup.chip_get_value(0, 4), 0)
+ self.assertEqual(mockup.chip_get_value(0, 6), 0)
+
+class LineFlags(MockupTestCase):
+
+ chip_sizes = ( 8, )
+
+ def test_set_flags(self):
+ with gpiod.Chip(mockup.chip_name(0)) as chip:
+ line = chip.get_line(3)
+ line.request(consumer=default_consumer,
+ type=gpiod.LINE_REQ_DIR_OUT,
+ default_val=1)
+ self.assertEqual(mockup.chip_get_value(0, 3), 1)
+ line.set_flags(gpiod.LINE_REQ_FLAG_ACTIVE_LOW)
+ self.assertEqual(mockup.chip_get_value(0, 3), 0)
+ line.set_flags(0)
+ self.assertEqual(mockup.chip_get_value(0, 3), 1)
+
+ def test_set_flags_bulk(self):
+ with gpiod.Chip(mockup.chip_name(0)) as chip:
+ lines = chip.get_lines(( 0, 3, 4, 6 ))
+ lines.request(consumer=default_consumer,
+ type=gpiod.LINE_REQ_DIR_OUT,
+ default_vals=(1,1,1,1))
+ self.assertEqual(mockup.chip_get_value(0, 0), 1)
+ self.assertEqual(mockup.chip_get_value(0, 3), 1)
+ self.assertEqual(mockup.chip_get_value(0, 4), 1)
+ self.assertEqual(mockup.chip_get_value(0, 6), 1)
+ lines.set_flags(gpiod.LINE_REQ_FLAG_ACTIVE_LOW)
+ self.assertEqual(mockup.chip_get_value(0, 0), 0)
+ self.assertEqual(mockup.chip_get_value(0, 3), 0)
+ self.assertEqual(mockup.chip_get_value(0, 4), 0)
+ self.assertEqual(mockup.chip_get_value(0, 6), 0)
+ lines.set_flags(0)
+ self.assertEqual(mockup.chip_get_value(0, 0), 1)
+ self.assertEqual(mockup.chip_get_value(0, 3), 1)
+ self.assertEqual(mockup.chip_get_value(0, 4), 1)
+ self.assertEqual(mockup.chip_get_value(0, 6), 1)
+
+class LineDirection(MockupTestCase):
+
+ chip_sizes = ( 8, )
+
+ def test_set_direction(self):
+ with gpiod.Chip(mockup.chip_name(0)) as chip:
+ line = chip.get_line(3)
+ line.request(consumer=default_consumer,
+ type=gpiod.LINE_REQ_DIR_OUT)
+ self.assertEqual(line.direction(), gpiod.Line.DIRECTION_OUTPUT)
+ line.set_direction_input()
+ self.assertEqual(line.direction(), gpiod.Line.DIRECTION_INPUT)
+ line.set_direction_output(0)
+ self.assertEqual(line.direction(), gpiod.Line.DIRECTION_OUTPUT)
+ self.assertEqual(mockup.chip_get_value(0, 3), 0)
+ line.set_direction_output(1)
+ self.assertEqual(line.direction(), gpiod.Line.DIRECTION_OUTPUT)
+ self.assertEqual(mockup.chip_get_value(0, 3), 1)
+ line.set_direction_output()
+ self.assertEqual(line.direction(), gpiod.Line.DIRECTION_OUTPUT)
+ self.assertEqual(mockup.chip_get_value(0, 3), 0)
+
+ def test_set_direction_bulk(self):
+ with gpiod.Chip(mockup.chip_name(0)) as chip:
+ lines = chip.get_lines(( 0, 3, 4, 6 ))
+ lines.request(consumer=default_consumer,
+ type=gpiod.LINE_REQ_DIR_OUT)
+ self.assertEqual(lines.to_list()[0].direction(), gpiod.Line.DIRECTION_OUTPUT)
+ self.assertEqual(lines.to_list()[1].direction(), gpiod.Line.DIRECTION_OUTPUT)
+ self.assertEqual(lines.to_list()[2].direction(), gpiod.Line.DIRECTION_OUTPUT)
+ self.assertEqual(lines.to_list()[3].direction(), gpiod.Line.DIRECTION_OUTPUT)
+ lines.set_direction_input()
+ self.assertEqual(lines.to_list()[0].direction(), gpiod.Line.DIRECTION_INPUT)
+ self.assertEqual(lines.to_list()[1].direction(), gpiod.Line.DIRECTION_INPUT)
+ self.assertEqual(lines.to_list()[2].direction(), gpiod.Line.DIRECTION_INPUT)
+ self.assertEqual(lines.to_list()[3].direction(), gpiod.Line.DIRECTION_INPUT)
+ lines.set_direction_output((0,0,1,0))
+ self.assertEqual(lines.to_list()[0].direction(), gpiod.Line.DIRECTION_OUTPUT)
+ self.assertEqual(lines.to_list()[1].direction(), gpiod.Line.DIRECTION_OUTPUT)
+ self.assertEqual(lines.to_list()[2].direction(), gpiod.Line.DIRECTION_OUTPUT)
+ self.assertEqual(lines.to_list()[3].direction(), gpiod.Line.DIRECTION_OUTPUT)
+ self.assertEqual(mockup.chip_get_value(0, 0), 0)
+ self.assertEqual(mockup.chip_get_value(0, 3), 0)
+ self.assertEqual(mockup.chip_get_value(0, 4), 1)
+ self.assertEqual(mockup.chip_get_value(0, 6), 0)
+ lines.set_direction_output((1,1,1,0))
+ self.assertEqual(lines.to_list()[0].direction(), gpiod.Line.DIRECTION_OUTPUT)
+ self.assertEqual(lines.to_list()[1].direction(), gpiod.Line.DIRECTION_OUTPUT)
+ self.assertEqual(lines.to_list()[2].direction(), gpiod.Line.DIRECTION_OUTPUT)
+ self.assertEqual(lines.to_list()[3].direction(), gpiod.Line.DIRECTION_OUTPUT)
+ self.assertEqual(mockup.chip_get_value(0, 0), 1)
+ self.assertEqual(mockup.chip_get_value(0, 3), 1)
+ self.assertEqual(mockup.chip_get_value(0, 4), 1)
+ self.assertEqual(mockup.chip_get_value(0, 6), 0)
+ lines.set_direction_output()
+ self.assertEqual(lines.to_list()[0].direction(), gpiod.Line.DIRECTION_OUTPUT)
+ self.assertEqual(lines.to_list()[1].direction(), gpiod.Line.DIRECTION_OUTPUT)
+ self.assertEqual(lines.to_list()[2].direction(), gpiod.Line.DIRECTION_OUTPUT)
+ self.assertEqual(lines.to_list()[3].direction(), gpiod.Line.DIRECTION_OUTPUT)
+ self.assertEqual(mockup.chip_get_value(0, 0), 0)
+ self.assertEqual(mockup.chip_get_value(0, 3), 0)
+ self.assertEqual(mockup.chip_get_value(0, 4), 0)
+ self.assertEqual(mockup.chip_get_value(0, 6), 0)
+
class LineRequestBehavior(MockupTestCase):
chip_sizes = ( 8, )
--
2.24.0
next prev parent reply other threads:[~2019-12-01 3:25 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-01 3:23 [libgpiod][PATCH v4 00/20] Add support for bias flags and SET_CONFIG Kent Gibson
2019-12-01 3:23 ` [libgpiod][PATCH v4 01/20] core: add support for bias flags Kent Gibson
2019-12-01 3:23 ` [libgpiod][PATCH v4 02/20] tests: add tests " Kent Gibson
2019-12-01 3:23 ` [libgpiod][PATCH v4 03/20] bindings: cxx: add support " Kent Gibson
2019-12-01 3:23 ` [libgpiod][PATCH v4 04/20] bindings: cxx: tests: add tests " Kent Gibson
2019-12-01 3:23 ` [libgpiod][PATCH v4 05/20] bindings: python: add support " Kent Gibson
2019-12-01 3:23 ` [libgpiod][PATCH v4 06/20] bindings: python: tests: add tests " Kent Gibson
2019-12-01 3:23 ` [libgpiod][PATCH v4 07/20] core: add support for SET_CONFIG Kent Gibson
2019-12-01 3:23 ` [libgpiod][PATCH v4 08/20] tests: add tests " Kent Gibson
2019-12-01 3:23 ` [libgpiod][PATCH v4 09/20] bindings: cxx: add support " Kent Gibson
2019-12-01 3:23 ` [libgpiod][PATCH v4 10/20] bindings: cxx: tests: add tests for SET_CONFIG methods Kent Gibson
2019-12-01 3:23 ` [libgpiod][PATCH v4 11/20] bindings: python: move tuple to int array conversion into helper function Kent Gibson
2019-12-01 3:23 ` [libgpiod][PATCH v4 12/20] bindings: python: add support for SET_CONFIG Kent Gibson
2019-12-01 3:24 ` Kent Gibson [this message]
2019-12-01 3:24 ` [libgpiod][PATCH v4 14/20] tools: add support for bias flags Kent Gibson
2019-12-01 3:24 ` [libgpiod][PATCH v4 15/20] tools: add tests " Kent Gibson
2019-12-01 3:24 ` [libgpiod][PATCH v4 16/20] tools: gpioset: add support for drive flags Kent Gibson
2019-12-01 3:24 ` [libgpiod][PATCH v4 17/20] tools: add tests " Kent Gibson
2019-12-01 3:24 ` [libgpiod][PATCH v4 18/20] core: document gpiod_line_set_value_bulk NULL values behaviour Kent Gibson
2019-12-01 3:24 ` [libgpiod][PATCH v4 19/20] bindings: cxx: fix indentation of wrapped field descriptions Kent Gibson
2019-12-01 3:24 ` [libgpiod][PATCH v4 20/20] bindings: python: make vals in gpiod_Line_set_value consistent with other functions Kent Gibson
2019-12-10 16:06 ` [libgpiod][PATCH v4 00/20] Add support for bias flags and SET_CONFIG Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191201032407.23589-14-warthog618@gmail.com \
--to=warthog618@gmail.com \
--cc=bgolaszewski@baylibre.com \
--cc=linux-gpio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).