linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	linux-gpio@vger.kernel.org
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v1 1/2] gpio: pca953x: Switch to bitops in IRQ callbacks
Date: Mon,  9 Dec 2019 14:35:44 +0200	[thread overview]
Message-ID: <20191209123545.85309-1-andriy.shevchenko@linux.intel.com> (raw)

Since we have driver converted to use bitmap API we must use
traditional bit operations (set_bit(), clear_bit(), etc.)
against it.

Currently IRQ callbacks are missed in the conversion and
thus broken.

Let's fix it right here right now.

Fixes: 35d13d94893f ("gpio: pca953x: convert to use bitmap API")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/gpio/gpio-pca953x.c | 26 ++++++++++----------------
 1 file changed, 10 insertions(+), 16 deletions(-)

diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 6652bee01966..9853547e7276 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -568,16 +568,18 @@ static void pca953x_irq_mask(struct irq_data *d)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 	struct pca953x_chip *chip = gpiochip_get_data(gc);
+	irq_hw_number_t hwirq = irqd_to_hwirq(d);
 
-	chip->irq_mask[d->hwirq / BANK_SZ] &= ~BIT(d->hwirq % BANK_SZ);
+	clear_bit(hwirq, chip->irq_mask);
 }
 
 static void pca953x_irq_unmask(struct irq_data *d)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 	struct pca953x_chip *chip = gpiochip_get_data(gc);
+	irq_hw_number_t hwirq = irqd_to_hwirq(d);
 
-	chip->irq_mask[d->hwirq / BANK_SZ] |= BIT(d->hwirq % BANK_SZ);
+	set_bit(hwirq, chip->irq_mask);
 }
 
 static int pca953x_irq_set_wake(struct irq_data *d, unsigned int on)
@@ -635,8 +637,7 @@ static int pca953x_irq_set_type(struct irq_data *d, unsigned int type)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 	struct pca953x_chip *chip = gpiochip_get_data(gc);
-	int bank_nb = d->hwirq / BANK_SZ;
-	u8 mask = BIT(d->hwirq % BANK_SZ);
+	irq_hw_number_t hwirq = irqd_to_hwirq(d);
 
 	if (!(type & IRQ_TYPE_EDGE_BOTH)) {
 		dev_err(&chip->client->dev, "irq %d: unsupported type %d\n",
@@ -644,15 +645,8 @@ static int pca953x_irq_set_type(struct irq_data *d, unsigned int type)
 		return -EINVAL;
 	}
 
-	if (type & IRQ_TYPE_EDGE_FALLING)
-		chip->irq_trig_fall[bank_nb] |= mask;
-	else
-		chip->irq_trig_fall[bank_nb] &= ~mask;
-
-	if (type & IRQ_TYPE_EDGE_RISING)
-		chip->irq_trig_raise[bank_nb] |= mask;
-	else
-		chip->irq_trig_raise[bank_nb] &= ~mask;
+	assign_bit(hwirq, chip->irq_trig_fall, type & IRQ_TYPE_EDGE_FALLING);
+	assign_bit(hwirq, chip->irq_trig_raise, type & IRQ_TYPE_EDGE_RISING);
 
 	return 0;
 }
@@ -661,10 +655,10 @@ static void pca953x_irq_shutdown(struct irq_data *d)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 	struct pca953x_chip *chip = gpiochip_get_data(gc);
-	u8 mask = BIT(d->hwirq % BANK_SZ);
+	irq_hw_number_t hwirq = irqd_to_hwirq(d);
 
-	chip->irq_trig_raise[d->hwirq / BANK_SZ] &= ~mask;
-	chip->irq_trig_fall[d->hwirq / BANK_SZ] &= ~mask;
+	clear_bit(hwirq, chip->irq_trig_raise);
+	clear_bit(hwirq, chip->irq_trig_fall);
 }
 
 static bool pca953x_irq_pending(struct pca953x_chip *chip, unsigned long *pending)
-- 
2.24.0


             reply	other threads:[~2019-12-09 12:35 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-09 12:35 Andy Shevchenko [this message]
2019-12-09 12:35 ` [PATCH v1 2/2] gpio: pca953x: Remove redundant forward declaration Andy Shevchenko
2019-12-11  9:50   ` Bartosz Golaszewski
2019-12-11  9:49 ` [PATCH v1 1/2] gpio: pca953x: Switch to bitops in IRQ callbacks Bartosz Golaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191209123545.85309-1-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).