From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Kent Gibson <warthog618@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-gpio@vger.kernel.org,
Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: [libgpiod][PATCH 3/7] tests: event: extend test coverage for reading multiple line events at once
Date: Wed, 18 Dec 2019 15:24:45 +0100 [thread overview]
Message-ID: <20191218142449.10957-4-brgl@bgdev.pl> (raw)
In-Reply-To: <20191218142449.10957-1-brgl@bgdev.pl>
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Add test cases for new helpers allowing users to read multiple events
at once.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
tests/tests-event.c | 83 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 83 insertions(+)
diff --git a/tests/tests-event.c b/tests/tests-event.c
index d425d1a..1f4a2eb 100644
--- a/tests/tests-event.c
+++ b/tests/tests-event.c
@@ -552,3 +552,86 @@ GPIOD_TEST_CASE(invalid_fd, 0, { 8 })
g_assert_cmpint(ret, ==, -1);
g_assert_cmpint(errno, ==, EINVAL);
}
+
+GPIOD_TEST_CASE(read_multiple_events, 0, { 8 })
+{
+ g_autoptr(gpiod_chip_struct) chip = NULL;
+ struct gpiod_line_event events[3];
+ struct timespec ts = { 1, 0 };
+ struct gpiod_line *line;
+ gint ret;
+
+ chip = gpiod_chip_open(gpiod_test_chip_path(0));
+ g_assert_nonnull(chip);
+ gpiod_test_return_if_failed();
+
+ line = gpiod_chip_get_line(chip, 4);
+ g_assert_nonnull(line);
+ gpiod_test_return_if_failed();
+
+ ret = gpiod_line_request_both_edges_events(line, GPIOD_TEST_CONSUMER);
+ g_assert_cmpint(ret, ==, 0);
+
+ gpiod_test_chip_set_pull(0, 4, 1);
+ usleep(10000);
+ gpiod_test_chip_set_pull(0, 4, 0);
+ usleep(10000);
+ gpiod_test_chip_set_pull(0, 4, 1);
+ usleep(10000);
+
+ ret = gpiod_line_event_wait(line, &ts);
+ g_assert_cmpint(ret, ==, 1);
+
+ ret = gpiod_line_event_read_multiple(line, events, 3);
+ g_assert_cmpint(ret, ==, 3);
+
+ g_assert_cmpint(events[0].event_type, ==,
+ GPIOD_LINE_EVENT_RISING_EDGE);
+ g_assert_cmpint(events[1].event_type, ==,
+ GPIOD_LINE_EVENT_FALLING_EDGE);
+ g_assert_cmpint(events[2].event_type, ==,
+ GPIOD_LINE_EVENT_RISING_EDGE);
+}
+
+GPIOD_TEST_CASE(read_multiple_events_fd, 0, { 8 })
+{
+ g_autoptr(gpiod_chip_struct) chip = NULL;
+ struct gpiod_line_event events[3];
+ struct timespec ts = { 1, 0 };
+ struct gpiod_line *line;
+ gint ret, fd;
+
+ chip = gpiod_chip_open(gpiod_test_chip_path(0));
+ g_assert_nonnull(chip);
+ gpiod_test_return_if_failed();
+
+ line = gpiod_chip_get_line(chip, 4);
+ g_assert_nonnull(line);
+ gpiod_test_return_if_failed();
+
+ ret = gpiod_line_request_both_edges_events(line, GPIOD_TEST_CONSUMER);
+ g_assert_cmpint(ret, ==, 0);
+
+ gpiod_test_chip_set_pull(0, 4, 1);
+ usleep(10000);
+ gpiod_test_chip_set_pull(0, 4, 0);
+ usleep(10000);
+ gpiod_test_chip_set_pull(0, 4, 1);
+ usleep(10000);
+
+ ret = gpiod_line_event_wait(line, &ts);
+ g_assert_cmpint(ret, ==, 1);
+
+ fd = gpiod_line_event_get_fd(line);
+ g_assert_cmpint(fd, >=, 0);
+
+ ret = gpiod_line_event_read_fd_multiple(fd, events, 3);
+ g_assert_cmpint(ret, ==, 3);
+
+ g_assert_cmpint(events[0].event_type, ==,
+ GPIOD_LINE_EVENT_RISING_EDGE);
+ g_assert_cmpint(events[1].event_type, ==,
+ GPIOD_LINE_EVENT_FALLING_EDGE);
+ g_assert_cmpint(events[2].event_type, ==,
+ GPIOD_LINE_EVENT_RISING_EDGE);
+}
--
2.23.0
next prev parent reply other threads:[~2019-12-18 14:25 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-18 14:24 [libgpiod][PATCH 0/7] teach libgpiod to read multiple line events at once Bartosz Golaszewski
2019-12-18 14:24 ` [libgpiod][PATCH 1/7] core: use gpiod_line_event_get_fd() in gpiod_line_event_read() Bartosz Golaszewski
2019-12-18 14:24 ` [libgpiod][PATCH 2/7] core: provide functions for reading multiple line events at once Bartosz Golaszewski
2019-12-18 14:24 ` Bartosz Golaszewski [this message]
2019-12-19 13:35 ` [libgpiod][PATCH 3/7] tests: event: extend test coverage " Kent Gibson
2019-12-19 13:48 ` Bartosz Golaszewski
2019-12-19 14:05 ` Kent Gibson
2019-12-19 14:07 ` Bartosz Golaszewski
2019-12-19 14:36 ` Kent Gibson
2019-12-19 16:19 ` Bartosz Golaszewski
2019-12-24 12:11 ` Bartosz Golaszewski
2019-12-18 14:24 ` [libgpiod][PATCH 4/7] bindings: cxx: provide a method for reading multiple line events Bartosz Golaszewski
2019-12-18 14:24 ` [libgpiod][PATCH 5/7] bindings: cxx: tests: add a test-case " Bartosz Golaszewski
2019-12-18 14:24 ` [libgpiod][PATCH 6/7] bindings: python: add a method " Bartosz Golaszewski
2019-12-18 14:24 ` [libgpiod][PATCH 7/7] bindings: python: tests: add a test-case " Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191218142449.10957-4-brgl@bgdev.pl \
--to=brgl@bgdev.pl \
--cc=andriy.shevchenko@linux.intel.com \
--cc=bgolaszewski@baylibre.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=warthog618@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox