Re: [PATCH V3 1/3] dt-bindings: imx: Add pinctrl binding doc for i.MX8MP

[Rob Herring <robh@kernel.org>]

On Mon, Jan 06, 2020 at 05:29:50PM +0800, Anson Huang wrote:
> Add binding doc for i.MX8MP pinctrl driver.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
> ---
> Changes since V2:
> 	- use DT schema instead of txt for binding doc.
> ---
>  .../bindings/pinctrl/fsl,imx8mp-pinctrl.yaml       |  65 ++
>  arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h     | 931 +++++++++++++++++++++
>  2 files changed, 996 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
> new file mode 100644
> index 0000000..cdb6c21
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
> @@ -0,0 +1,65 @@
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mp-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale IMX8MP IOMUX Controller
> +
> +maintainers:
> +  - Anson Huang <Anson.Huang@nxp.com>
> +
> +description:
> +  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
> +  for common binding part and usage.
> +
> +properties:
> +  compatible:
> +    const: fsl,imx8mp-iomuxc
> +
> +# Client device subnode's properties
> +patternProperties:
> +  '-grp$':
> +    type: object
> +    description:
> +      Pinctrl node's client devices use subnodes for desired pin configuration.
> +      Client device subnodes use below standard properties.
> +
> +    properties:
> +      fsl,pins:
> +        $ref: /schemas/types.yaml#/definitions/string

string or...

> +        description:
> +          each entry consists of 6 integers and represents the mux and config

integers?

> +          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
> +          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
> +          be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last
> +          integer CONFIG is the pad setting value like pull-up on this pin. Please
> +          refer to i.MX8M Plus Reference Manual for detailed CONFIG settings.
> +
> +    required:
> +      - fsl,pins
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  # Pinmux controller node
> +  - |
> +    iomuxc: pinctrl@30330000 {
> +        compatible = "fsl,imx8mp-iomuxc";
> +        reg = <0x30330000 0x10000>;
> +
> +        pinctrl_uart2: uart2grp {
> +            fsl,pins = <
> +                MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x49
> +                MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x49

Run 'make dt_binding_check'. Doesn't build:

Error: Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.example.dts:23.21-22 syntax error
FATAL ERROR: Unable to parse input tree

> +            >;
> +        };
> +    };
> +
> +...