[PATCH AUTOSEL 4.19 050/671] pinctrl: meson-gxl: remove invalid GPIOX tsin_a pins

[PATCH AUTOSEL 4.19 050/671] pinctrl: meson-gxl: remove invalid GPIOX tsin_a pins

[Sasha Levin]

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit d801064cb871806e6843738ecad38993646f53f7 ]

The GPIOX tsin_a pins wrongly uses the SDCard pinctrl bits, this
patch completely removes these pins entries until we find out what
are the correct bits and registers to be used instead.

Fixes: 5a6ae9b80139 ("pinctrl: meson-gxl: add tsin_a pins")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/meson/pinctrl-meson-gxl.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
index 158f618f1695..0c0a5018102b 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
@@ -239,13 +239,9 @@ static const unsigned int eth_link_led_pins[]	= { GPIOZ_14 };
 static const unsigned int eth_act_led_pins[]	= { GPIOZ_15 };
 
 static const unsigned int tsin_a_d0_pins[]	= { GPIODV_0 };
-static const unsigned int tsin_a_d0_x_pins[]	= { GPIOX_10 };
 static const unsigned int tsin_a_clk_pins[]	= { GPIODV_8 };
-static const unsigned int tsin_a_clk_x_pins[]	= { GPIOX_11 };
 static const unsigned int tsin_a_sop_pins[]	= { GPIODV_9 };
-static const unsigned int tsin_a_sop_x_pins[]	= { GPIOX_8 };
 static const unsigned int tsin_a_d_valid_pins[] = { GPIODV_10 };
-static const unsigned int tsin_a_d_valid_x_pins[] = { GPIOX_9 };
 static const unsigned int tsin_a_fail_pins[]	= { GPIODV_11 };
 static const unsigned int tsin_a_dp_pins[] = {
 	GPIODV_1, GPIODV_2, GPIODV_3, GPIODV_4, GPIODV_5, GPIODV_6, GPIODV_7,
@@ -432,10 +428,6 @@ static struct meson_pmx_group meson_gxl_periphs_groups[] = {
 	GROUP(spi_miso,		5,	2),
 	GROUP(spi_ss0,		5,	1),
 	GROUP(spi_sclk,		5,	0),
-	GROUP(tsin_a_sop_x,	6,	3),
-	GROUP(tsin_a_d_valid_x,	6,	2),
-	GROUP(tsin_a_d0_x,	6,	1),
-	GROUP(tsin_a_clk_x,	6,	0),
 
 	/* Bank Z */
 	GROUP(eth_mdio,		4,	23),
@@ -698,8 +690,8 @@ static const char * const eth_led_groups[] = {
 };
 
 static const char * const tsin_a_groups[] = {
-	"tsin_a_clk", "tsin_a_clk_x", "tsin_a_sop", "tsin_a_sop_x",
-	"tsin_a_d_valid", "tsin_a_d_valid_x", "tsin_a_d0", "tsin_a_d0_x",
+	"tsin_a_clk", "tsin_a_sop",
+	"tsin_a_d_valid", "tsin_a_d0",
 	"tsin_a_dp", "tsin_a_fail",
 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 068/671] pinctrl: sh-pfc: r8a7740: Add missing REF125CK pin to gether_gmii group

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 1ebc589a7786f17f97b9e87b44e0fb4d0290d8f8 ]

The gether_gmii_mux[] array contains the REF125CK pin mark, but the
gether_gmii_pins[] array lacks the corresponding pin number.

Fixes: bae11d30d0cafdc5 ("sh-pfc: r8a7740: Add GETHER pin groups and functions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/sh-pfc/pfc-r8a7740.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
index 35f436bcb849..d8077065636e 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
@@ -1982,7 +1982,7 @@ static const unsigned int gether_gmii_pins[] = {
 	 */
 	185, 186, 187, 188, 189, 190, 191, 192, 174, 161, 204,
 	171, 170, 169, 168, 167, 166, 173, 172, 176, 184, 183, 203,
-	205, 163, 206, 207,
+	205, 163, 206, 207, 158,
 };
 static const unsigned int gether_gmii_mux[] = {
 	ET_ERXD0_MARK, ET_ERXD1_MARK, ET_ERXD2_MARK, ET_ERXD3_MARK,
-- 
2.20.1

[PATCH AUTOSEL 4.19 069/671] pinctrl: sh-pfc: r8a7740: Add missing LCD0 marks to lcd0_data24_1 group

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 96bb2a6ab4eca10e5b6490b3f0738e9f7ec22c2b ]

The lcd0_data24_1_pins[] array contains the LCD0 D1[2-5] pin numbers,
but the lcd0_data24_1_mux[] array lacks the corresponding pin marks.

Fixes: 06c7dd866da70f6c ("sh-pfc: r8a7740: Add LCDC0 and LCDC1 pin groups and functions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/sh-pfc/pfc-r8a7740.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
index d8077065636e..e9739dbcb356 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
@@ -2154,6 +2154,7 @@ static const unsigned int lcd0_data24_1_mux[] = {
 	LCD0_D0_MARK, LCD0_D1_MARK, LCD0_D2_MARK, LCD0_D3_MARK,
 	LCD0_D4_MARK, LCD0_D5_MARK, LCD0_D6_MARK, LCD0_D7_MARK,
 	LCD0_D8_MARK, LCD0_D9_MARK, LCD0_D10_MARK, LCD0_D11_MARK,
+	LCD0_D12_MARK, LCD0_D13_MARK, LCD0_D14_MARK, LCD0_D15_MARK,
 	LCD0_D16_MARK, LCD0_D17_MARK, LCD0_D18_PORT163_MARK,
 	LCD0_D19_PORT162_MARK, LCD0_D20_PORT161_MARK, LCD0_D21_PORT158_MARK,
 	LCD0_D22_PORT160_MARK, LCD0_D23_PORT159_MARK,
-- 
2.20.1

[PATCH AUTOSEL 4.19 070/671] pinctrl: sh-pfc: r8a7791: Remove bogus ctrl marks from qspi_data4_b group

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 884fa25fb6e5e63ab970d612a628313bb68f37cc ]

The qspi_data4_b_mux[] array contains pin marks for the clock and chip
select pins.  The qspi_data4_b_pins[] array rightfully does not contain
the corresponding pin numbers, as the control pins are provided by a
separate group (qspi_ctrl_b).

Fixes: 2d0c386f135e4186 ("pinctrl: sh-pfc: r8a7791: Add QSPI pin groups")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/sh-pfc/pfc-r8a7791.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7791.c b/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
index 5811784d88cb..f5b4255570b2 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
@@ -3220,8 +3220,7 @@ static const unsigned int qspi_data4_b_pins[] = {
 	RCAR_GP_PIN(6, 4),
 };
 static const unsigned int qspi_data4_b_mux[] = {
-	SPCLK_B_MARK, MOSI_IO0_B_MARK, MISO_IO1_B_MARK,
-	IO2_B_MARK, IO3_B_MARK, SSL_B_MARK,
+	MOSI_IO0_B_MARK, MISO_IO1_B_MARK, IO2_B_MARK, IO3_B_MARK,
 };
 /* - SCIF0 ------------------------------------------------------------------ */
 static const unsigned int scif0_data_pins[] = {
-- 
2.20.1

[PATCH AUTOSEL 4.19 071/671] pinctrl: sh-pfc: r8a7791: Remove bogus marks from vin1_b_data18 group

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 0d6256cb880166a4111bebce35790019e56b6e1b ]

The vin1_b_data18_mux[] arrays contains pin marks for the 2 LSB bits of
the color components.  The vin1_b_data18_pins[] array rightfully does
not include the corresponding pin numbers, as RGB18 is subset of RGB24,
containing only the 6 MSB bits of each component.

Fixes: 8e32c9671f84acd8 ("pinctrl: sh-pfc: r8a7791: Add VIN pins")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/sh-pfc/pfc-r8a7791.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7791.c b/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
index f5b4255570b2..6236ac55c65d 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
@@ -4374,17 +4374,14 @@ static const unsigned int vin1_b_data18_pins[] = {
 };
 static const unsigned int vin1_b_data18_mux[] = {
 	/* B */
-	VI1_DATA0_B_MARK, VI1_DATA1_B_MARK,
 	VI1_DATA2_B_MARK, VI1_DATA3_B_MARK,
 	VI1_DATA4_B_MARK, VI1_DATA5_B_MARK,
 	VI1_DATA6_B_MARK, VI1_DATA7_B_MARK,
 	/* G */
-	VI1_G0_B_MARK, VI1_G1_B_MARK,
 	VI1_G2_B_MARK, VI1_G3_B_MARK,
 	VI1_G4_B_MARK, VI1_G5_B_MARK,
 	VI1_G6_B_MARK, VI1_G7_B_MARK,
 	/* R */
-	VI1_R0_B_MARK, VI1_R1_B_MARK,
 	VI1_R2_B_MARK, VI1_R3_B_MARK,
 	VI1_R4_B_MARK, VI1_R5_B_MARK,
 	VI1_R6_B_MARK, VI1_R7_B_MARK,
-- 
2.20.1

[PATCH AUTOSEL 4.19 072/671] pinctrl: sh-pfc: sh73a0: Add missing TO pin to tpu4_to3 group

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 124cde98f856b6206b804acbdec3b7c80f8c3427 ]

The tpu4_to3_mux[] array contains the TPU4TO3 pin mark, but the
tpu4_to3_pins[] array lacks the corresponding pin number.

Add the missing pin number, for non-GPIO pin F26.

Fixes: 5da4eb049de803c7 ("sh-pfc: sh73a0: Add TPU pin groups and functions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/sh-pfc/pfc-sh73a0.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
index d25e6f674d0a..f8fbedb46585 100644
--- a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
+++ b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
@@ -3086,6 +3086,7 @@ static const unsigned int tpu4_to2_mux[] = {
 };
 static const unsigned int tpu4_to3_pins[] = {
 	/* TO */
+	PIN_NUMBER(6, 26),
 };
 static const unsigned int tpu4_to3_mux[] = {
 	TPU4TO3_MARK,
-- 
2.20.1

[PATCH AUTOSEL 4.19 073/671] pinctrl: sh-pfc: r8a7794: Remove bogus IPSR9 field

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 6a6c195d98a1a5e70faa87f594d7564af1dd1bed ]

The Peripheral Function Select Register 9 contains 12 fields, but the
variable field descriptor contains a 13th bogus field of 3 bits.

Fixes: 43c4436e2f1890a7 ("pinctrl: sh-pfc: add R8A7794 PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/sh-pfc/pfc-r8a7794.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7794.c b/drivers/pinctrl/sh-pfc/pfc-r8a7794.c
index 164002437594..24b9bb1ee1fe 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7794.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7794.c
@@ -5215,7 +5215,7 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 		FN_AVB_MDC, FN_SSI_SDATA6_B, 0, 0, }
 	},
 	{ PINMUX_CFG_REG_VAR("IPSR9", 0xE6060044, 32,
-			     1, 3, 3, 3, 3, 2, 2, 3, 3, 3, 3, 3, 3) {
+			     1, 3, 3, 3, 3, 2, 2, 3, 3, 3, 3, 3) {
 		/* IP9_31 [1] */
 		0, 0,
 		/* IP9_30_28 [3] */
-- 
2.20.1

[PATCH AUTOSEL 4.19 074/671] pinctrl: sh-pfc: r8a77970: Add missing MOD_SEL0 field

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 67d7745bc78e16ec6b3af02bc1da6c8c868cbd89 ]

The Module Select Register 0 contains 20 (= 5 x 4) reserved bits, and 12
single-bit fields, but the variable field descriptor lacks a field of 4
reserved bits.

Fixes: b92ac66a1819602b ("pinctrl: sh-pfc: Add R8A77970 PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/sh-pfc/pfc-r8a77970.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77970.c b/drivers/pinctrl/sh-pfc/pfc-r8a77970.c
index eeb58b3bbc9a..53fae9fd682b 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a77970.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a77970.c
@@ -2354,7 +2354,7 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 #define F_(x, y)	x,
 #define FM(x)		FN_##x,
 	{ PINMUX_CFG_REG_VAR("MOD_SEL0", 0xe6060500, 32,
-			     4, 4, 4, 4,
+			     4, 4, 4, 4, 4,
 			     1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) {
 		/* RESERVED 31, 30, 29, 28 */
 		0, 0, 0, 0, 0, 0, 0, 0,	0, 0, 0, 0, 0, 0, 0, 0,
-- 
2.20.1

[PATCH AUTOSEL 4.19 075/671] pinctrl: sh-pfc: r8a77980: Add missing MOD_SEL0 field

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit b0f77269f6bba385f1f4dce44e7756cf8fbc0176 ]

The Module Select Register 0 contains 20 (= 5 x 4) reserved bits, and 12
single-bit fields, but the variable field descriptor lacks a field of 4
reserved bits.

Fixes: f59125248a691dfe ("pinctrl: sh-pfc: Add R8A77980 PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/sh-pfc/pfc-r8a77980.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77980.c b/drivers/pinctrl/sh-pfc/pfc-r8a77980.c
index 3f6967331f64..81a710bb8555 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a77980.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a77980.c
@@ -2751,7 +2751,7 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 #define F_(x, y)	x,
 #define FM(x)		FN_##x,
 	{ PINMUX_CFG_REG_VAR("MOD_SEL0", 0xe6060500, 32,
-			     4, 4, 4, 4,
+			     4, 4, 4, 4, 4,
 			     1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) {
 		/* RESERVED 31, 30, 29, 28 */
 		0, 0, 0, 0, 0, 0, 0, 0,	0, 0, 0, 0, 0, 0, 0, 0,
-- 
2.20.1

[PATCH AUTOSEL 4.19 076/671] pinctrl: sh-pfc: sh7734: Add missing IPSR11 field

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 94482af7055e1ffa211c1135256b85590ebcac99 ]

The Peripheral Function Select Register 11 contains 3 reserved bits and
15 variable-width fields, but the variable field descriptor does not
contain the 3-bit field IP11[25:23].

Fixes: 856cb4bb337ee504 ("sh: Add support pinmux for SH7734")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/sh-pfc/pfc-sh7734.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7734.c b/drivers/pinctrl/sh-pfc/pfc-sh7734.c
index 3eccc9b3ca84..05ccb27f7781 100644
--- a/drivers/pinctrl/sh-pfc/pfc-sh7734.c
+++ b/drivers/pinctrl/sh-pfc/pfc-sh7734.c
@@ -2237,7 +2237,7 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 		FN_LCD_DATA15_B, 0, 0, 0 }
 	},
 	{ PINMUX_CFG_REG_VAR("IPSR11", 0xFFFC0048, 32,
-			3, 1, 2, 2, 2, 3, 3, 1, 2, 3, 3, 1, 1, 1, 1) {
+			3, 1, 2, 3, 2, 2, 3, 3, 1, 2, 3, 3, 1, 1, 1, 1) {
 	    /* IP11_31_29 [3] */
 	    0, 0, 0, 0, 0, 0, 0, 0,
 	    /* IP11_28 [1] */
-- 
2.20.1

[PATCH AUTOSEL 4.19 077/671] pinctrl: sh-pfc: r8a77995: Remove bogus SEL_PWM[0-3]_3 configurations

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit e28dc3f09c9d2555a9bd982f0847988591052226 ]

While the SEL_PWM[0-3] fields in the Module Select Register 0 support 4
possible configurations per PWM pin, only the first 3 are valid.

Replace the invalid and unused configurations for SEL_PWM[0-3]_3 by
dummies.

Fixes: 794a6711764658a1 ("pinctrl: sh-pfc: Initial R8A77995 PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/sh-pfc/pfc-r8a77995.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77995.c b/drivers/pinctrl/sh-pfc/pfc-r8a77995.c
index adade5b7ffbc..337c80bde8f9 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a77995.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a77995.c
@@ -391,10 +391,10 @@ FM(IP12_31_28)	IP12_31_28 \
 #define MOD_SEL0_27		FM(SEL_MSIOF3_0)	FM(SEL_MSIOF3_1)
 #define MOD_SEL0_26		FM(SEL_HSCIF3_0)	FM(SEL_HSCIF3_1)
 #define MOD_SEL0_25		FM(SEL_SCIF4_0)		FM(SEL_SCIF4_1)
-#define MOD_SEL0_24_23		FM(SEL_PWM0_0)		FM(SEL_PWM0_1)		FM(SEL_PWM0_2)		FM(SEL_PWM0_3)
-#define MOD_SEL0_22_21		FM(SEL_PWM1_0)		FM(SEL_PWM1_1)		FM(SEL_PWM1_2)		FM(SEL_PWM1_3)
-#define MOD_SEL0_20_19		FM(SEL_PWM2_0)		FM(SEL_PWM2_1)		FM(SEL_PWM2_2)		FM(SEL_PWM2_3)
-#define MOD_SEL0_18_17		FM(SEL_PWM3_0)		FM(SEL_PWM3_1)		FM(SEL_PWM3_2)		FM(SEL_PWM3_3)
+#define MOD_SEL0_24_23		FM(SEL_PWM0_0)		FM(SEL_PWM0_1)		FM(SEL_PWM0_2)		F_(0, 0)
+#define MOD_SEL0_22_21		FM(SEL_PWM1_0)		FM(SEL_PWM1_1)		FM(SEL_PWM1_2)		F_(0, 0)
+#define MOD_SEL0_20_19		FM(SEL_PWM2_0)		FM(SEL_PWM2_1)		FM(SEL_PWM2_2)		F_(0, 0)
+#define MOD_SEL0_18_17		FM(SEL_PWM3_0)		FM(SEL_PWM3_1)		FM(SEL_PWM3_2)		F_(0, 0)
 #define MOD_SEL0_15		FM(SEL_IRQ_0_0)		FM(SEL_IRQ_0_1)
 #define MOD_SEL0_14		FM(SEL_IRQ_1_0)		FM(SEL_IRQ_1_1)
 #define MOD_SEL0_13		FM(SEL_IRQ_2_0)		FM(SEL_IRQ_2_1)
-- 
2.20.1

[PATCH AUTOSEL 4.19 078/671] pinctrl: sh-pfc: sh7269: Add missing PCIOR0 field

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 9540cbdfcd861caf67a6f0e4bb7f46d41c4aad86 ]

The Port C I/O Register 0 contains 7 reserved bits, but the descriptor
contains only dummy configuration values for 6 reserved bits, thus
breaking the configuration of all subsequent fields in the register.

Fix this by adding the two missing configuration values.

Fixes: f5e811f2a43117b2 ("sh-pfc: Add sh7269 pinmux support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/sh-pfc/pfc-sh7269.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7269.c b/drivers/pinctrl/sh-pfc/pfc-sh7269.c
index a50d22bef1f4..cfdb4fc177c3 100644
--- a/drivers/pinctrl/sh-pfc/pfc-sh7269.c
+++ b/drivers/pinctrl/sh-pfc/pfc-sh7269.c
@@ -2119,7 +2119,7 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 	},
 
 	{ PINMUX_CFG_REG("PCIOR0", 0xfffe3852, 16, 1) {
-		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 		PC8_IN, PC8_OUT,
 		PC7_IN, PC7_OUT,
 		PC6_IN, PC6_OUT,
-- 
2.20.1

[PATCH AUTOSEL 4.19 079/671] pinctrl: sh-pfc: sh7734: Remove bogus IPSR10 value

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 4d374bacd7c9665179f9752a52d5d602c45d8190 ]

The IP10[5:3] field in Peripheral Function Select Register 10 has a
width of 3 bits, i.e. it allows programming one out of 8 different
configurations.
However, 9 values are provided instead of 8, overflowing into the
subsequent field in the register, and thus breaking the configuration of
the latter.

Fix this by dropping a bogus zero value.

Fixes: ac1ebc2190f575fc ("sh-pfc: Add sh7734 pinmux support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/sh-pfc/pfc-sh7734.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7734.c b/drivers/pinctrl/sh-pfc/pfc-sh7734.c
index 05ccb27f7781..c691e5e9d9de 100644
--- a/drivers/pinctrl/sh-pfc/pfc-sh7734.c
+++ b/drivers/pinctrl/sh-pfc/pfc-sh7734.c
@@ -2231,7 +2231,7 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 		FN_LCD_CL1_B, 0, 0,
 	    /* IP10_5_3 [3] */
 		FN_SSI_WS23, FN_VI1_5_B, FN_TX1_D, FN_HSCK0_C, FN_FALE_B,
-		FN_LCD_DON_B, 0, 0, 0,
+		FN_LCD_DON_B, 0, 0,
 	    /* IP10_2_0 [3] */
 		FN_SSI_SCK23, FN_VI1_4_B, FN_RX1_D, FN_FCLE_B,
 		FN_LCD_DATA15_B, 0, 0, 0 }
-- 
2.20.1