From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Hans de Goede <hdegoede@redhat.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Linus Walleij <linus.walleij@linaro.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Sasha Levin <sashal@kernel.org>,
linux-gpio@vger.kernel.org
Subject: [PATCH AUTOSEL 4.14 022/186] pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins
Date: Fri, 14 Feb 2020 11:14:31 -0500 [thread overview]
Message-ID: <20200214161715.18113-22-sashal@kernel.org> (raw)
In-Reply-To: <20200214161715.18113-1-sashal@kernel.org>
From: Hans de Goede <hdegoede@redhat.com>
[ Upstream commit a23680594da7a9e2696dbcf4f023e9273e2fa40b ]
Suspending Goodix touchscreens requires changing the interrupt pin to
output before sending them a power-down command. Followed by wiggling
the interrupt pin to wake the device up, after which it is put back
in input mode.
On Bay Trail devices with a Goodix touchscreen direct-irq mode is used
in combination with listing the pin as a normal GpioIo resource.
This works fine, until the goodix driver gets rmmod-ed and then insmod-ed
again. In this case byt_gpio_disable_free() calls
byt_gpio_clear_triggering() which clears the IRQ flags and after that the
(direct) IRQ no longer triggers.
This commit fixes this by adding a check for the BYT_DIRECT_IRQ_EN flag
to byt_gpio_clear_triggering().
Note that byt_gpio_clear_triggering() only gets called from
byt_gpio_disable_free() for direct-irq enabled pins, as these are excluded
from the irq_valid mask by byt_init_irq_valid_mask().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/intel/pinctrl-baytrail.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c
index 9df5d29d708da..4fb3e44f91331 100644
--- a/drivers/pinctrl/intel/pinctrl-baytrail.c
+++ b/drivers/pinctrl/intel/pinctrl-baytrail.c
@@ -958,7 +958,13 @@ static void byt_gpio_clear_triggering(struct byt_gpio *vg, unsigned int offset)
raw_spin_lock_irqsave(&byt_lock, flags);
value = readl(reg);
- value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL);
+
+ /* Do not clear direct-irq enabled IRQs (from gpio_disable_free) */
+ if (value & BYT_DIRECT_IRQ_EN)
+ /* nothing to do */ ;
+ else
+ value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL);
+
writel(value, reg);
raw_spin_unlock_irqrestore(&byt_lock, flags);
}
--
2.20.1
next prev parent reply other threads:[~2020-02-14 16:57 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200214161715.18113-1-sashal@kernel.org>
2020-02-14 16:14 ` [PATCH AUTOSEL 4.14 013/186] pinctrl: sh-pfc: sh7264: Fix CAN function GPIOs Sasha Levin
2020-02-14 16:14 ` [PATCH AUTOSEL 4.14 018/186] gpio: gpio-grgpio: fix possible sleep-in-atomic-context bugs in grgpio_irq_map/unmap() Sasha Levin
2020-02-14 16:14 ` Sasha Levin [this message]
2020-02-14 16:15 ` [PATCH AUTOSEL 4.14 094/186] pinctrl: sh-pfc: r8a7778: Fix duplicate SDSELF_B and SD1_CLK_B Sasha Levin
2020-02-14 16:15 ` [PATCH AUTOSEL 4.14 095/186] pinctrl: sh-pfc: sh7269: Fix CAN function GPIOs Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200214161715.18113-22-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=hdegoede@redhat.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).