linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Chuanhong Guo <gch981213@gmail.com>
To: linux-gpio@vger.kernel.org
Cc: "Chuanhong Guo" <gch981213@gmail.com>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Bartosz Golaszewski" <bgolaszewski@baylibre.com>,
	"Sergio Paracuellos" <sergio.paracuellos@gmail.com>,
	"René van Dorst" <opensource@vdorst.com>,
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH 1/2] gpio: mmio: introduce BGPIOF_NO_SET_ON_INPUT
Date: Sun, 15 Mar 2020 20:13:37 +0800	[thread overview]
Message-ID: <20200315121338.251362-2-gch981213@gmail.com> (raw)
In-Reply-To: <20200315121338.251362-1-gch981213@gmail.com>

Some gpio controllers ignores pin value writing when that pin is
configured as input mode. As a result, bgpio_dir_out should set
pin to output before configuring pin values or gpio pin values
can't be set up properly.
Introduce two variants of bgpio_dir_out: bgpio_dir_out_val_first
and bgpio_dir_out_dir_first, and assign direction_output according
to a new flag: BGPIOF_NO_SET_ON_INPUT.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
---
 drivers/gpio/gpio-mmio.c    | 23 +++++++++++++++++++----
 include/linux/gpio/driver.h |  1 +
 2 files changed, 20 insertions(+), 4 deletions(-)

diff --git a/drivers/gpio/gpio-mmio.c b/drivers/gpio/gpio-mmio.c
index f729e3e9e983..b778f33cc6af 100644
--- a/drivers/gpio/gpio-mmio.c
+++ b/drivers/gpio/gpio-mmio.c
@@ -389,12 +389,10 @@ static int bgpio_get_dir(struct gpio_chip *gc, unsigned int gpio)
 	return GPIO_LINE_DIRECTION_IN;
 }
 
-static int bgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+static void bgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 {
 	unsigned long flags;
 
-	gc->set(gc, gpio, val);
-
 	spin_lock_irqsave(&gc->bgpio_lock, flags);
 
 	gc->bgpio_dir |= bgpio_line2mask(gc, gpio);
@@ -405,7 +403,21 @@ static int bgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 		gc->write_reg(gc->reg_dir_out, gc->bgpio_dir);
 
 	spin_unlock_irqrestore(&gc->bgpio_lock, flags);
+}
 
+static int bgpio_dir_out_dir_first(struct gpio_chip *gc, unsigned int gpio,
+				   int val)
+{
+	bgpio_dir_out(gc, gpio, val);
+	gc->set(gc, gpio, val);
+	return 0;
+}
+
+static int bgpio_dir_out_val_first(struct gpio_chip *gc, unsigned int gpio,
+				   int val)
+{
+	gc->set(gc, gpio, val);
+	bgpio_dir_out(gc, gpio, val);
 	return 0;
 }
 
@@ -538,7 +550,10 @@ static int bgpio_setup_direction(struct gpio_chip *gc,
 	if (dirout || dirin) {
 		gc->reg_dir_out = dirout;
 		gc->reg_dir_in = dirin;
-		gc->direction_output = bgpio_dir_out;
+		if (flags & BGPIOF_NO_SET_ON_INPUT)
+			gc->direction_output = bgpio_dir_out_dir_first;
+		else
+			gc->direction_output = bgpio_dir_out_val_first;
 		gc->direction_input = bgpio_dir_in;
 		gc->get_direction = bgpio_get_dir;
 	} else {
diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h
index 6ef05bccc0a6..ed65e00ee977 100644
--- a/include/linux/gpio/driver.h
+++ b/include/linux/gpio/driver.h
@@ -572,6 +572,7 @@ int bgpio_init(struct gpio_chip *gc, struct device *dev,
 #define BGPIOF_BIG_ENDIAN_BYTE_ORDER	BIT(3)
 #define BGPIOF_READ_OUTPUT_REG_SET	BIT(4) /* reg_set stores output value */
 #define BGPIOF_NO_OUTPUT		BIT(5) /* only input */
+#define BGPIOF_NO_SET_ON_INPUT		BIT(6)
 
 int gpiochip_irq_map(struct irq_domain *d, unsigned int irq,
 		     irq_hw_number_t hwirq);
-- 
2.24.1


  reply	other threads:[~2020-03-15 12:14 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-15 12:13 [PATCH 0/2] gpio: mmio: introduce BGPIOF_NO_SET_ON_INPUT Chuanhong Guo
2020-03-15 12:13 ` Chuanhong Guo [this message]
2020-03-16  9:27   ` [PATCH 1/2] " Bartosz Golaszewski
2020-03-15 12:13 ` [PATCH 2/2] gpio: mt7621: add BGPIOF_NO_SET_ON_INPUT flag Chuanhong Guo
2020-03-16  9:27   ` Bartosz Golaszewski
2020-03-15 12:48 ` [PATCH 0/2] gpio: mmio: introduce BGPIOF_NO_SET_ON_INPUT René van Dorst
2020-03-15 14:17 ` Sergio Paracuellos

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200315121338.251362-2-gch981213@gmail.com \
    --to=gch981213@gmail.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=opensource@vdorst.com \
    --cc=sergio.paracuellos@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).