[PATCH AUTOSEL 5.4 05/73] pinctrl: meson-gxl: fix GPIOX sdio pins

[Sasha Levin <sashal@kernel.org>]

From: Nicolas Belin <nbelin@baylibre.com>

[ Upstream commit dc7a06b0dbbafac8623c2b7657e61362f2f479a7 ]

In the gxl driver, the sdio cmd and clk pins are inverted. It has not caused
any issue so far because devices using these pins always take both pins
so the resulting configuration is OK.

Fixes: 0f15f500ff2c ("pinctrl: meson: Add GXL pinctrl definitions")
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Nicolas Belin <nbelin@baylibre.com>
Link: https://lore.kernel.org/r/1582204512-7582-1-git-send-email-nbelin@baylibre.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/meson/pinctrl-meson-gxl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
index 72c5373c8dc1e..e8d1f3050487f 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
@@ -147,8 +147,8 @@ static const unsigned int sdio_d0_pins[]	= { GPIOX_0 };
 static const unsigned int sdio_d1_pins[]	= { GPIOX_1 };
 static const unsigned int sdio_d2_pins[]	= { GPIOX_2 };
 static const unsigned int sdio_d3_pins[]	= { GPIOX_3 };
-static const unsigned int sdio_cmd_pins[]	= { GPIOX_4 };
-static const unsigned int sdio_clk_pins[]	= { GPIOX_5 };
+static const unsigned int sdio_clk_pins[]	= { GPIOX_4 };
+static const unsigned int sdio_cmd_pins[]	= { GPIOX_5 };
 static const unsigned int sdio_irq_pins[]	= { GPIOX_7 };
 
 static const unsigned int nand_ce0_pins[]	= { BOOT_8 };
-- 
2.20.1