linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paul Thomas <pthomas8589@gmail.com>
To: Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Paul Thomas <pthomas8589@gmail.com>
Subject: [PATCH v2] gpio: gpio-pca953x, Add get_multiple function
Date: Tue, 14 Apr 2020 11:28:42 -0400	[thread overview]
Message-ID: <20200414152843.32129-1-pthomas8589@gmail.com> (raw)

Implement a get_multiple function for gpio-pca953x. If a driver
leaves get_multiple unimplemented then gpio_chip_get_multiple()
in gpiolib.c takes care of it by calling chip->get() as needed.
For i2c chips this is very inefficient. For example if you do an
8-bit read then instead of a single i2c transaction there are
8 transactions reading the same byte!

This has been tested with max7312 chips on a 5.2 kernel.

Signed-off-by: Paul Thomas <pthomas8589@gmail.com>
---
 changes from v1: rebased to 5.7-rc1

 drivers/gpio/gpio-pca953x.c | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 5638b4e5355f..6317510b0dc3 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -115,6 +115,7 @@ MODULE_DEVICE_TABLE(acpi, pca953x_acpi_ids);
 
 #define MAX_BANK 5
 #define BANK_SZ 8
+#define BANK_SFT 3 /* ilog2(BANK_SZ) */
 #define MAX_LINE	(MAX_BANK * BANK_SZ)
 
 #define NBANK(chip) DIV_ROUND_UP(chip->gpio_chip.ngpio, BANK_SZ)
@@ -466,6 +467,41 @@ static int pca953x_gpio_get_direction(struct gpio_chip *gc, unsigned off)
 	return GPIO_LINE_DIRECTION_OUT;
 }
 
+static int pca953x_gpio_get_multiple(struct gpio_chip *gc,
+				      unsigned long *mask, unsigned long *bits)
+{
+	struct pca953x_chip *chip = gpiochip_get_data(gc);
+	unsigned int reg_val;
+	int offset, value, i, ret = 0;
+	u8 inreg;
+
+	/* Force offset outside the range of i so that
+	 * at least the first relevant register is read
+	 */
+	offset = gc->ngpio;
+	for_each_set_bit(i, mask, gc->ngpio) {
+		/* whenever i goes into a new bank update inreg
+		 * and read the register
+		 */
+		if ((offset >> BANK_SFT) != (i >> BANK_SFT)) {
+			offset = i;
+			inreg = pca953x_recalc_addr(chip, chip->regs->input,
+						    offset, true, false);
+			mutex_lock(&chip->i2c_lock);
+			ret = regmap_read(chip->regmap, inreg, &reg_val);
+			mutex_unlock(&chip->i2c_lock);
+			if (ret < 0)
+				return ret;
+		}
+		/* reg_val is relative to the last read byte,
+		 * so only shift the relative bits
+		 */
+		value = (reg_val >> (i % 8)) & 0x01;
+		__assign_bit(i, bits, value);
+	}
+	return ret;
+}
+
 static void pca953x_gpio_set_multiple(struct gpio_chip *gc,
 				      unsigned long *mask, unsigned long *bits)
 {
@@ -551,6 +587,7 @@ static void pca953x_setup_gpio(struct pca953x_chip *chip, int gpios)
 	gc->get = pca953x_gpio_get_value;
 	gc->set = pca953x_gpio_set_value;
 	gc->get_direction = pca953x_gpio_get_direction;
+	gc->get_multiple = pca953x_gpio_get_multiple;
 	gc->set_multiple = pca953x_gpio_set_multiple;
 	gc->set_config = pca953x_gpio_set_config;
 	gc->can_sleep = true;
-- 
2.17.1


             reply	other threads:[~2020-04-14 15:30 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-14 15:28 Paul Thomas [this message]
2020-04-16 11:22 ` [PATCH v2] gpio: gpio-pca953x, Add get_multiple function Linus Walleij
2020-04-16 13:21   ` Bartosz Golaszewski
2020-04-16 13:40     ` Paul Thomas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200414152843.32129-1-pthomas8589@gmail.com \
    --to=pthomas8589@gmail.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).