[PATCH v1 2/2] pinctrl: intel: Move npins closer to pin_base in struct intel_community

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

It's common across the drivers to use the (pin_base, npins) pair to describe
community characteristics. Thus, move them in the struct intel_community
to be closer to each other.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/intel/pinctrl-intel.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/intel/pinctrl-intel.h b/drivers/pinctrl/intel/pinctrl-intel.h
index 058bf2b6d9f0e..bd653f2a07382 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.h
+++ b/drivers/pinctrl/intel/pinctrl-intel.h
@@ -94,12 +94,12 @@ enum {
  * @ie_offset: Register offset of GPI_IE from @regs.
  * @features: Additional features supported by the hardware
  * @pin_base: Starting pin of pins in this community
+ * @npins: Number of pins in this community
  * @gpp_size: Maximum number of pads in each group, such as GPI_IS, GPI_IE,
  *            PADCFGLOCK, HOSTSW_OWN. Used when @gpps is %NULL.
  * @gpp_num_padown_regs: Number of pad registers each pad group consumes at
  *			 minimum. Use %0 if the number of registers can be
  *			 determined by the size of the group.
- * @npins: Number of pins in this community
  * @gpps: Pad groups if the controller has variable size pad groups
  * @ngpps: Number of pad groups in this community
  * @pad_map: Optional non-linear mapping of the pads
@@ -121,12 +121,13 @@ struct intel_community {
 	unsigned int ie_offset;
 	unsigned int features;
 	unsigned int pin_base;
+	size_t npins;
 	unsigned int gpp_size;
 	unsigned int gpp_num_padown_regs;
-	size_t npins;
 	const struct intel_padgroup *gpps;
 	size_t ngpps;
 	const unsigned int *pad_map;
+
 	/* Reserved for the core driver */
 	void __iomem *regs;
 	void __iomem *pad_regs;
-- 
2.26.1