[PATCH] gpio: arizona: put pm_runtime in case of failure

[Navid Emamdoost <navid.emamdoost@gmail.com>]

Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count if pm_runtime_put is not called in
error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
---
 drivers/gpio/gpio-arizona.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c
index 7520a13b4c7c..5bda38e0780f 100644
--- a/drivers/gpio/gpio-arizona.c
+++ b/drivers/gpio/gpio-arizona.c
@@ -64,6 +64,7 @@ static int arizona_gpio_get(struct gpio_chip *chip, unsigned offset)
 		ret = pm_runtime_get_sync(chip->parent);
 		if (ret < 0) {
 			dev_err(chip->parent, "Failed to resume: %d\n", ret);
+			pm_runtime_put_autosuspend(chip->parent);
 			return ret;
 		}
 
@@ -72,12 +73,15 @@ static int arizona_gpio_get(struct gpio_chip *chip, unsigned offset)
 		if (ret < 0) {
 			dev_err(chip->parent, "Failed to drop cache: %d\n",
 				ret);
+			pm_runtime_put_autosuspend(chip->parent);
 			return ret;
 		}
 
 		ret = regmap_read(arizona->regmap, reg, &val);
-		if (ret < 0)
+		if (ret < 0) {
+			pm_runtime_put_autosuspend(chip->parent);
 			return ret;
+		}
 
 		pm_runtime_mark_last_busy(chip->parent);
 		pm_runtime_put_autosuspend(chip->parent);
-- 
2.17.1