From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Mika Westerberg <mika.westerberg@linux.intel.com>,
linux-gpio@vger.kernel.org,
Linus Walleij <linus.walleij@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v1 04/10] pinctrl: intel: Split intel_config_get() to three functions
Date: Wed, 10 Jun 2020 21:35:37 +0300 [thread overview]
Message-ID: <20200610183543.89414-4-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20200610183543.89414-1-andriy.shevchenko@linux.intel.com>
Split intel_config_get() to three functions, i.e. intel_config_get() and
two helpers intel_config_get_pull() and intel_config_get_debounce() to be
symmetrical with intel_config_set*().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/pinctrl/intel/pinctrl-intel.c | 89 ++++++++++++++++++---------
1 file changed, 61 insertions(+), 28 deletions(-)
diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
index 208299ede9d8..ddbfb6e75a2f 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -521,20 +521,17 @@ static const struct pinmux_ops intel_pinmux_ops = {
.gpio_set_direction = intel_gpio_set_direction,
};
-static int intel_config_get(struct pinctrl_dev *pctldev, unsigned int pin,
- unsigned long *config)
+static int intel_config_get_pull(struct intel_pinctrl *pctrl, unsigned int pin,
+ enum pin_config_param param, u32 *arg)
{
- struct intel_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
- enum pin_config_param param = pinconf_to_config_param(*config);
const struct intel_community *community;
+ void __iomem *padcfg1;
u32 value, term;
- u32 arg = 0;
-
- if (!intel_pad_owned_by_host(pctrl, pin))
- return -ENOTSUPP;
community = intel_get_community(pctrl, pin);
- value = readl(intel_get_padcfg(pctrl, pin, PADCFG1));
+ padcfg1 = intel_get_padcfg(pctrl, pin, PADCFG1);
+ value = readl(padcfg1);
+
term = (value & PADCFG1_TERM_MASK) >> PADCFG1_TERM_SHIFT;
switch (param) {
@@ -549,16 +546,16 @@ static int intel_config_get(struct pinctrl_dev *pctldev, unsigned int pin,
switch (term) {
case PADCFG1_TERM_1K:
- arg = 1000;
+ *arg = 1000;
break;
case PADCFG1_TERM_2K:
- arg = 2000;
+ *arg = 2000;
break;
case PADCFG1_TERM_5K:
- arg = 5000;
+ *arg = 5000;
break;
case PADCFG1_TERM_20K:
- arg = 20000;
+ *arg = 20000;
break;
}
@@ -572,35 +569,71 @@ static int intel_config_get(struct pinctrl_dev *pctldev, unsigned int pin,
case PADCFG1_TERM_1K:
if (!(community->features & PINCTRL_FEATURE_1K_PD))
return -EINVAL;
- arg = 1000;
+ *arg = 1000;
break;
case PADCFG1_TERM_5K:
- arg = 5000;
+ *arg = 5000;
break;
case PADCFG1_TERM_20K:
- arg = 20000;
+ *arg = 20000;
break;
}
break;
- case PIN_CONFIG_INPUT_DEBOUNCE: {
- void __iomem *padcfg2;
- u32 v;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
- padcfg2 = intel_get_padcfg(pctrl, pin, PADCFG2);
- if (!padcfg2)
- return -ENOTSUPP;
+static int intel_config_get_debounce(struct intel_pinctrl *pctrl, unsigned int pin,
+ enum pin_config_param param, u32 *arg)
+{
+ void __iomem *padcfg2;
+ unsigned long v;
+ u32 value2;
- v = readl(padcfg2);
- if (!(v & PADCFG2_DEBEN))
- return -EINVAL;
+ padcfg2 = intel_get_padcfg(pctrl, pin, PADCFG2);
+ if (!padcfg2)
+ return -ENOTSUPP;
+
+ value2 = readl(padcfg2);
+ if (!(value2 & PADCFG2_DEBEN))
+ return -EINVAL;
+
+ v = (value2 & PADCFG2_DEBOUNCE_MASK) >> PADCFG2_DEBOUNCE_SHIFT;
+ *arg = BIT(v) * DEBOUNCE_PERIOD_NSEC / NSEC_PER_USEC;
+
+ return 0;
+}
+
+static int intel_config_get(struct pinctrl_dev *pctldev, unsigned int pin,
+ unsigned long *config)
+{
+ struct intel_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+ enum pin_config_param param = pinconf_to_config_param(*config);
+ u32 arg = 0;
+ int ret;
- v = (v & PADCFG2_DEBOUNCE_MASK) >> PADCFG2_DEBOUNCE_SHIFT;
- arg = BIT(v) * DEBOUNCE_PERIOD_NSEC / NSEC_PER_USEC;
+ if (!intel_pad_owned_by_host(pctrl, pin))
+ return -ENOTSUPP;
+ switch (param) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ case PIN_CONFIG_BIAS_PULL_UP:
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ ret = intel_config_get_pull(pctrl, pin, param, &arg);
+ if (ret)
+ return ret;
+ break;
+
+ case PIN_CONFIG_INPUT_DEBOUNCE:
+ ret = intel_config_get_debounce(pctrl, pin, param, &arg);
+ if (ret)
+ return ret;
break;
- }
default:
return -ENOTSUPP;
--
2.27.0.rc2
next prev parent reply other threads:[~2020-06-10 18:35 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-10 18:35 [PATCH v1 01/10] pinctrl: intel: Disable input and output buffer when switching to GPIO Andy Shevchenko
2020-06-10 18:35 ` [PATCH v1 02/10] pinctrl: intel: Reduce scope of the lock Andy Shevchenko
2020-06-10 18:35 ` [PATCH v1 03/10] pinctrl: intel: Make use of IRQ_RETVAL() Andy Shevchenko
2020-06-10 18:35 ` Andy Shevchenko [this message]
2020-06-10 18:35 ` [PATCH v1 05/10] pinctrl: intel: Get rid of redundant 'else' in intel_config_set_debounce() Andy Shevchenko
2020-06-10 18:35 ` [PATCH v1 06/10] pinctrl: intel: Drop the only label in the code for consistency Andy Shevchenko
2020-06-10 18:35 ` [PATCH v1 07/10] pinctrl: intel: Protect IO in few call backs by lock Andy Shevchenko
2020-06-10 18:35 ` [PATCH v1 08/10] pinctrl: intel: Introduce for_each_requested_gpio() macro Andy Shevchenko
2020-06-10 18:35 ` [PATCH v1 09/10] pinctrl: intel: Make use of for_each_requested_gpio() Andy Shevchenko
2020-06-10 18:35 ` [PATCH v1 10/10] pinctrl: lynxpoint: " Andy Shevchenko
2020-06-12 14:33 ` [PATCH v1 01/10] pinctrl: intel: Disable input and output buffer when switching to GPIO Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200610183543.89414-4-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).