[PATCH] gpiolib: switch to simpler IDA interface

[PATCH] gpiolib: switch to simpler IDA interface

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We don't need to specify any ranges when allocating IDs so we can switch
to ida_alloc() and ida_free() instead of the ida_simple_ counterparts.

ida_simple_get(ida, 0, 0, gfp) is equivalent to
ida_alloc_range(ida, 0, UINT_MAX, gfp) which is equivalent to
ida_alloc(ida, gfp). Note: IDR will never actually allocate an ID
larger than INT_MAX.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/gpio/gpiolib.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 80137c1b3cdc..97f76334ec7e 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -426,7 +426,7 @@ static void gpiodevice_release(struct device *dev)
 	struct gpio_device *gdev = dev_get_drvdata(dev);
 
 	list_del(&gdev->list);
-	ida_simple_remove(&gpio_ida, gdev->id);
+	ida_free(&gpio_ida, gdev->id);
 	kfree_const(gdev->label);
 	kfree(gdev->descs);
 	kfree(gdev);
@@ -537,7 +537,7 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
 		gc->of_node = gdev->dev.of_node;
 #endif
 
-	gdev->id = ida_simple_get(&gpio_ida, 0, 0, GFP_KERNEL);
+	gdev->id = ida_alloc(&gpio_ida, GFP_KERNEL);
 	if (gdev->id < 0) {
 		ret = gdev->id;
 		goto err_free_gdev;
@@ -705,7 +705,7 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
 err_free_descs:
 	kfree(gdev->descs);
 err_free_ida:
-	ida_simple_remove(&gpio_ida, gdev->id);
+	ida_free(&gpio_ida, gdev->id);
 err_free_gdev:
 	/* failures here can mean systems won't boot... */
 	pr_err("%s: GPIOs %d..%d (%s) failed to register, %d\n", __func__,
-- 
2.26.1

Re: [PATCH] gpiolib: switch to simpler IDA interface

[Andy Shevchenko]

On Tue, Sep 08, 2020 at 03:12:25PM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> We don't need to specify any ranges when allocating IDs so we can switch
> to ida_alloc() and ida_free() instead of the ida_simple_ counterparts.
> 
> ida_simple_get(ida, 0, 0, gfp) is equivalent to
> ida_alloc_range(ida, 0, UINT_MAX, gfp) which is equivalent to
> ida_alloc(ida, gfp). Note: IDR will never actually allocate an ID
> larger than INT_MAX.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>  drivers/gpio/gpiolib.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> index 80137c1b3cdc..97f76334ec7e 100644
> --- a/drivers/gpio/gpiolib.c
> +++ b/drivers/gpio/gpiolib.c
> @@ -426,7 +426,7 @@ static void gpiodevice_release(struct device *dev)
>  	struct gpio_device *gdev = dev_get_drvdata(dev);
>  
>  	list_del(&gdev->list);
> -	ida_simple_remove(&gpio_ida, gdev->id);
> +	ida_free(&gpio_ida, gdev->id);
>  	kfree_const(gdev->label);
>  	kfree(gdev->descs);
>  	kfree(gdev);
> @@ -537,7 +537,7 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
>  		gc->of_node = gdev->dev.of_node;
>  #endif
>  
> -	gdev->id = ida_simple_get(&gpio_ida, 0, 0, GFP_KERNEL);
> +	gdev->id = ida_alloc(&gpio_ida, GFP_KERNEL);
>  	if (gdev->id < 0) {
>  		ret = gdev->id;
>  		goto err_free_gdev;
> @@ -705,7 +705,7 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
>  err_free_descs:
>  	kfree(gdev->descs);
>  err_free_ida:
> -	ida_simple_remove(&gpio_ida, gdev->id);
> +	ida_free(&gpio_ida, gdev->id);
>  err_free_gdev:
>  	/* failures here can mean systems won't boot... */
>  	pr_err("%s: GPIOs %d..%d (%s) failed to register, %d\n", __func__,
> -- 
> 2.26.1
> 

-- 
With Best Regards,
Andy Shevchenko