[PATCH] gpio: stmpe: Fix forgotten refactoring

[PATCH] gpio: stmpe: Fix forgotten refactoring

[Linus Walleij]

We actually handle the gpio_irq_chip set-up properly
now despite what the comment says. Also assign this
pointer along with the rest of the gpio_irq_chip
setup code.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 Documentation/driver-api/gpio/driver.rst |  4 ++--
 drivers/gpio/gpio-stmpe.c                | 10 +---------
 2 files changed, 3 insertions(+), 11 deletions(-)

diff --git a/Documentation/driver-api/gpio/driver.rst b/Documentation/driver-api/gpio/driver.rst
index c9dac5233f3e..490ccd2c3c3e 100644
--- a/Documentation/driver-api/gpio/driver.rst
+++ b/Documentation/driver-api/gpio/driver.rst
@@ -538,8 +538,8 @@ these helpers, we can set .irq.need_valid_mask of the gpiochip before
 devm_gpiochip_add_data() or gpiochip_add_data() is called. This allocates an
 .irq.valid_mask with as many bits set as there are GPIO lines in the chip, each
 bit representing line 0..n-1. Drivers can exclude GPIO lines by clearing bits
-from this mask. The mask must be filled in before gpiochip_irqchip_add() or
-gpiochip_irqchip_add_nested() is called.
+from this mask. The mask can be filled in the init_valid_mask() callback
+that is part of the struct gpio_irq_chip.
 
 To use the helpers please keep the following in mind:
 
diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c
index b0155d6007c8..b94ef8181428 100644
--- a/drivers/gpio/gpio-stmpe.c
+++ b/drivers/gpio/gpio-stmpe.c
@@ -474,15 +474,6 @@ static int stmpe_gpio_probe(struct platform_device *pdev)
 	stmpe_gpio->chip.parent = &pdev->dev;
 	stmpe_gpio->chip.of_node = np;
 	stmpe_gpio->chip.base = -1;
-	/*
-	 * REVISIT: this makes sure the valid mask gets allocated and
-	 * filled in when adding the gpio_chip, but the rest of the
-	 * gpio_irqchip is still filled in using the old method
-	 * in gpiochip_irqchip_add_nested() so clean this up once we
-	 * get the gpio_irqchip to initialize while adding the
-	 * gpio_chip also for threaded irqchips.
-	 */
-	stmpe_gpio->chip.irq.init_valid_mask = stmpe_init_irq_valid_mask;
 
 	if (IS_ENABLED(CONFIG_DEBUG_FS))
                 stmpe_gpio->chip.dbg_show = stmpe_dbg_show;
@@ -520,6 +511,7 @@ static int stmpe_gpio_probe(struct platform_device *pdev)
 		girq->default_type = IRQ_TYPE_NONE;
 		girq->handler = handle_simple_irq;
 		girq->threaded = true;
+		girq->init_valid_mask = stmpe_init_irq_valid_mask;
 	}
 
 	ret = gpiochip_add_data(&stmpe_gpio->chip, stmpe_gpio);
-- 
2.26.2