[PATCH 7/7] gpio: exar: use devm action for freeing the IDA and drop remove()

[Bartosz Golaszewski <brgl@bgdev.pl>]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We can simplify the error path in probe() and drop remove() entirely if
we provide a devm action for freeing the device ID.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/gpio/gpio-exar.c | 27 ++++++++++++---------------
 1 file changed, 12 insertions(+), 15 deletions(-)

diff --git a/drivers/gpio/gpio-exar.c b/drivers/gpio/gpio-exar.c
index e4da278f74a2..fda9346d1dc0 100644
--- a/drivers/gpio/gpio-exar.c
+++ b/drivers/gpio/gpio-exar.c
@@ -110,6 +110,13 @@ static int exar_direction_input(struct gpio_chip *chip, unsigned int offset)
 	return 0;
 }
 
+static void exar_devm_ida_free(void *data)
+{
+	struct exar_gpio_chip *exar_gpio = data;
+
+	ida_free(&ida_index, exar_gpio->index);
+}
+
 static const struct regmap_config exar_regmap_config = {
 	.name		= "exar-gpio",
 	.reg_bits	= 8,
@@ -157,6 +164,10 @@ static int gpio_exar_probe(struct platform_device *pdev)
 	if (index < 0)
 		return index;
 
+	ret = devm_add_action_or_reset(dev, exar_devm_ida_free, exar_gpio);
+	if (ret)
+		return ret;
+
 	sprintf(exar_gpio->name, "exar_gpio%d", index);
 	exar_gpio->gpio_chip.label = exar_gpio->name;
 	exar_gpio->gpio_chip.parent = dev;
@@ -173,29 +184,15 @@ static int gpio_exar_probe(struct platform_device *pdev)
 
 	ret = devm_gpiochip_add_data(dev, &exar_gpio->gpio_chip, exar_gpio);
 	if (ret)
-		goto err_destroy;
+		return ret;
 
 	platform_set_drvdata(pdev, exar_gpio);
 
-	return 0;
-
-err_destroy:
-	ida_free(&ida_index, index);
-	return ret;
-}
-
-static int gpio_exar_remove(struct platform_device *pdev)
-{
-	struct exar_gpio_chip *exar_gpio = platform_get_drvdata(pdev);
-
-	ida_free(&ida_index, exar_gpio->index);
-
 	return 0;
 }
 
 static struct platform_driver gpio_exar_driver = {
 	.probe	= gpio_exar_probe,
-	.remove	= gpio_exar_remove,
 	.driver	= {
 		.name = DRIVER_NAME,
 	},
-- 
2.29.1