linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	linux-gpio@vger.kernel.org,
	Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Coiby Xu <coiby.xu@gmail.com>,
	Hans de Goede <hdegoede@redhat.com>
Subject: [PATCH v4 3/9] gpiolib: acpi: Take into account debounce settings
Date: Fri,  6 Nov 2020 21:22:58 +0200	[thread overview]
Message-ID: <20201106192304.49179-4-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20201106192304.49179-1-andriy.shevchenko@linux.intel.com>

We didn't take into account the debounce settings supplied by ACPI.
This change is targeting the mentioned gap.

Reported-by: Coiby Xu <coiby.xu@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/gpio/gpiolib-acpi.c | 18 ++++++++++++++++++
 drivers/gpio/gpiolib-acpi.h |  2 ++
 2 files changed, 20 insertions(+)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index c127b410a7a2..b4a0decfeac2 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -299,6 +299,10 @@ static acpi_status acpi_gpiochip_alloc_event(struct acpi_resource *ares,
 		return AE_OK;
 	}
 
+	ret = gpiod_set_debounce(desc, agpio->debounce_timeout);
+	if (ret)
+		goto fail_free_desc;
+
 	ret = gpiochip_lock_as_irq(chip, pin);
 	if (ret) {
 		dev_err(chip->parent,
@@ -664,6 +668,7 @@ static int acpi_populate_gpio_lookup(struct acpi_resource *ares, void *data)
 		lookup->desc = acpi_get_gpiod(agpio->resource_source.string_ptr,
 					      agpio->pin_table[pin_index]);
 		lookup->info.pin_config = agpio->pin_config;
+		lookup->info.debounce = agpio->debounce_timeout;
 		lookup->info.gpioint = gpioint;
 
 		/*
@@ -961,6 +966,10 @@ int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index)
 			if (ret < 0)
 				return ret;
 
+			ret = gpiod_set_debounce(desc, info.debounce);
+			if (ret)
+				return ret;
+
 			irq_flags = acpi_dev_get_irq_type(info.triggering,
 							  info.polarity);
 
@@ -1048,6 +1057,7 @@ acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
 		if (!found) {
 			enum gpiod_flags flags = acpi_gpio_to_gpiod_flags(agpio);
 			const char *label = "ACPI:OpRegion";
+			int ret;
 
 			desc = gpiochip_request_own_desc(chip, pin, label,
 							 GPIO_ACTIVE_HIGH,
@@ -1058,6 +1068,14 @@ acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
 				goto out;
 			}
 
+			ret = gpiod_set_debounce(desc, agpio->debounce_timeout);
+			if (ret) {
+				status = AE_ERROR;
+				gpiochip_free_own_desc(desc);
+				mutex_unlock(&achip->conn_lock);
+				goto out;
+			}
+
 			conn = kzalloc(sizeof(*conn), GFP_KERNEL);
 			if (!conn) {
 				status = AE_NO_MEMORY;
diff --git a/drivers/gpio/gpiolib-acpi.h b/drivers/gpio/gpiolib-acpi.h
index 1c6d65cf0629..e2edb632b2cc 100644
--- a/drivers/gpio/gpiolib-acpi.h
+++ b/drivers/gpio/gpiolib-acpi.h
@@ -18,6 +18,7 @@ struct acpi_device;
  * @pin_config: pin bias as provided by ACPI
  * @polarity: interrupt polarity as provided by ACPI
  * @triggering: triggering type as provided by ACPI
+ * @debounce: debounce timeout as provided by ACPI
  * @quirks: Linux specific quirks as provided by struct acpi_gpio_mapping
  */
 struct acpi_gpio_info {
@@ -27,6 +28,7 @@ struct acpi_gpio_info {
 	int pin_config;
 	int polarity;
 	int triggering;
+	unsigned int debounce;
 	unsigned int quirks;
 };
 
-- 
2.28.0


  parent reply	other threads:[~2020-11-06 19:23 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-06 19:22 [PATCH v4 0/9] gpiolib: acpi: pin configuration fixes Andy Shevchenko
2020-11-06 19:22 ` [PATCH v4 1/9] gpiolib: acpi: Respect bias settings for GpioInt() resource Andy Shevchenko
2020-11-06 19:22 ` [PATCH v4 2/9] gpiolib: acpi: Use named item for enum gpiod_flags variable Andy Shevchenko
2020-11-06 19:22 ` Andy Shevchenko [this message]
2020-11-07 14:44   ` [PATCH v4 3/9] gpiolib: acpi: Take into account debounce settings Hans de Goede
2020-11-07 15:26     ` Andy Shevchenko
2020-11-08  9:31       ` Hans de Goede
2020-11-08  9:31       ` Hans de Goede
2020-11-09 11:45         ` Andy Shevchenko
2020-11-09 11:53           ` Hans de Goede
2020-11-09 15:43             ` Andy Shevchenko
2020-11-06 19:22 ` [PATCH v4 4/9] gpiolib: acpi: Move acpi_gpio_to_gpiod_flags() upper in the code Andy Shevchenko
2020-11-06 19:23 ` [PATCH v4 5/9] gpiolib: acpi: Make acpi_gpio_to_gpiod_flags() usable for GpioInt() Andy Shevchenko
2020-11-06 19:23 ` [PATCH v4 6/9] gpiolib: acpi: Extract acpi_request_own_gpiod() helper Andy Shevchenko
2020-11-06 19:23 ` [PATCH v4 7/9] gpiolib: acpi: Convert pin_index to be u16 Andy Shevchenko
2020-11-06 19:23 ` [PATCH v4 8/9] gpiolib: acpi: Use BIT() macro to increase readability Andy Shevchenko
2020-11-06 19:23 ` [PATCH v4 9/9] gpiolib: acpi: Make Intel GPIO tree official for GPIO ACPI work Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201106192304.49179-4-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=coiby.xu@gmail.com \
    --cc=hdegoede@redhat.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).