linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Linus Walleij <linus.walleij@linaro.org>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Jan Kiszka <jan.kiszka@siemens.com>,
	David Laight <David.Laight@aculab.com>
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: [PATCH v5 5/7] gpio: exar: unduplicate address and offset computation
Date: Mon, 16 Nov 2020 11:42:40 +0100	[thread overview]
Message-ID: <20201116104242.19907-6-brgl@bgdev.pl> (raw)
In-Reply-To: <20201116104242.19907-1-brgl@bgdev.pl>

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Provide and use helpers for calculating the register address and bit
offset instead of hand coding it in every function.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/gpio/gpio-exar.c | 40 ++++++++++++++++++++++++++++------------
 1 file changed, 28 insertions(+), 12 deletions(-)

diff --git a/drivers/gpio/gpio-exar.c b/drivers/gpio/gpio-exar.c
index db366d85b6b4..28b0b4b5fa35 100644
--- a/drivers/gpio/gpio-exar.c
+++ b/drivers/gpio/gpio-exar.c
@@ -33,6 +33,26 @@ struct exar_gpio_chip {
 	unsigned int first_pin;
 };
 
+static unsigned int
+exar_offset_to_sel_addr(struct exar_gpio_chip *exar_gpio, unsigned int offset)
+{
+	return (offset + exar_gpio->first_pin) / 8 ? EXAR_OFFSET_MPIOSEL_HI
+						   : EXAR_OFFSET_MPIOSEL_LO;
+}
+
+static unsigned int
+exar_offset_to_lvl_addr(struct exar_gpio_chip *exar_gpio, unsigned int offset)
+{
+	return (offset + exar_gpio->first_pin) / 8 ? EXAR_OFFSET_MPIOLVL_HI
+						   : EXAR_OFFSET_MPIOLVL_LO;
+}
+
+static unsigned int
+exar_offset_to_bit(struct exar_gpio_chip *exar_gpio, unsigned int offset)
+{
+	return (offset + exar_gpio->first_pin) % 8;
+}
+
 static void exar_update(struct gpio_chip *chip, unsigned int reg, int val,
 			unsigned int offset)
 {
@@ -52,9 +72,8 @@ static int exar_set_direction(struct gpio_chip *chip, int direction,
 			      unsigned int offset)
 {
 	struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
-	unsigned int addr = (offset + exar_gpio->first_pin) / 8 ?
-		EXAR_OFFSET_MPIOSEL_HI : EXAR_OFFSET_MPIOSEL_LO;
-	unsigned int bit  = (offset + exar_gpio->first_pin) % 8;
+	unsigned int addr = exar_offset_to_sel_addr(exar_gpio, offset);
+	unsigned int bit = exar_offset_to_bit(exar_gpio, offset);
 
 	exar_update(chip, addr, direction, bit);
 	return 0;
@@ -75,9 +94,8 @@ static int exar_get(struct gpio_chip *chip, unsigned int reg)
 static int exar_get_direction(struct gpio_chip *chip, unsigned int offset)
 {
 	struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
-	unsigned int addr = (offset + exar_gpio->first_pin) / 8 ?
-		EXAR_OFFSET_MPIOSEL_HI : EXAR_OFFSET_MPIOSEL_LO;
-	unsigned int bit  = (offset + exar_gpio->first_pin) % 8;
+	unsigned int addr = exar_offset_to_sel_addr(exar_gpio, offset);
+	unsigned int bit = exar_offset_to_bit(exar_gpio, offset);
 
 	if (exar_get(chip, addr) & BIT(bit))
 		return GPIO_LINE_DIRECTION_IN;
@@ -88,9 +106,8 @@ static int exar_get_direction(struct gpio_chip *chip, unsigned int offset)
 static int exar_get_value(struct gpio_chip *chip, unsigned int offset)
 {
 	struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
-	unsigned int addr = (offset + exar_gpio->first_pin) / 8 ?
-		EXAR_OFFSET_MPIOLVL_HI : EXAR_OFFSET_MPIOLVL_LO;
-	unsigned int bit  = (offset + exar_gpio->first_pin) % 8;
+	unsigned int addr = exar_offset_to_lvl_addr(exar_gpio, offset);
+	unsigned int bit = exar_offset_to_bit(exar_gpio, offset);
 
 	return !!(exar_get(chip, addr) & BIT(bit));
 }
@@ -99,9 +116,8 @@ static void exar_set_value(struct gpio_chip *chip, unsigned int offset,
 			   int value)
 {
 	struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
-	unsigned int addr = (offset + exar_gpio->first_pin) / 8 ?
-		EXAR_OFFSET_MPIOLVL_HI : EXAR_OFFSET_MPIOLVL_LO;
-	unsigned int bit  = (offset + exar_gpio->first_pin) % 8;
+	unsigned int addr = exar_offset_to_lvl_addr(exar_gpio, offset);
+	unsigned int bit = exar_offset_to_bit(exar_gpio, offset);
 
 	exar_update(chip, addr, value, bit);
 }
-- 
2.29.1


  parent reply	other threads:[~2020-11-16 12:03 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-16 10:42 [PATCH v5 0/7] gpio: exar: refactor the driver Bartosz Golaszewski
2020-11-16 10:42 ` [PATCH v5 1/7] gpio: exar: add a newline after the copyright notice Bartosz Golaszewski
2020-11-16 10:42 ` [PATCH v5 2/7] gpio: exar: include idr.h Bartosz Golaszewski
2020-11-16 10:42 ` [PATCH v5 3/7] gpio: exar: switch to a simpler IDA interface Bartosz Golaszewski
2020-11-16 10:42 ` [PATCH v5 4/7] gpio: exar: use a helper variable for &pdev->dev Bartosz Golaszewski
2020-11-16 10:42 ` Bartosz Golaszewski [this message]
2020-11-16 10:42 ` [PATCH v5 6/7] gpio: exar: switch to using regmap Bartosz Golaszewski
2020-11-16 10:42 ` [PATCH v5 7/7] gpio: exar: use devm action for freeing the IDA and drop remove() Bartosz Golaszewski
2020-11-23 11:38 ` [PATCH v5 0/7] gpio: exar: refactor the driver Bartosz Golaszewski
2020-11-23 11:58   ` Jan Kiszka
2020-11-23 12:08     ` Jan Kiszka
2020-11-23 12:51       ` Bartosz Golaszewski
2020-11-23 12:12     ` Bartosz Golaszewski
2020-11-23 12:57       ` Jan Kiszka
2020-11-23 13:33         ` Bartosz Golaszewski
2020-11-23 13:37         ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201116104242.19907-6-brgl@bgdev.pl \
    --to=brgl@bgdev.pl \
    --cc=David.Laight@aculab.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=jan.kiszka@siemens.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).