Linux GPIO subsystem development
 help / color / mirror / Atom feed
From: Andre Przywara <andre.przywara@arm.com>
To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@siol.net>
Cc: "Icenowy Zheng" <icenowy@aosc.xyz>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Rob Herring" <robh@kernel.org>,
	"Clément Péron" <peron.clem@gmail.com>,
	"Shuosheng Huang" <huangshuosheng@allwinnertech.com>,
	"Yangtao Li" <tiny.windzz@gmail.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
	linux-gpio@vger.kernel.org
Subject: [PATCH v2 04/21] pinctrl: sunxi: Add support for the Allwinner H616-R pin controller
Date: Fri, 11 Dec 2020 01:19:17 +0000	[thread overview]
Message-ID: <20201211011934.6171-5-andre.przywara@arm.com> (raw)
In-Reply-To: <20201211011934.6171-1-andre.przywara@arm.com>

There are only two pins left now, used to connect to the PMIC via I2C.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/pinctrl/sunxi/Kconfig                 |  5 ++
 drivers/pinctrl/sunxi/Makefile                |  1 +
 drivers/pinctrl/sunxi/pinctrl-sun50i-h616-r.c | 54 +++++++++++++++++++
 3 files changed, 60 insertions(+)
 create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-h616-r.c

diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
index 73e88ce71a48..33751a6a0757 100644
--- a/drivers/pinctrl/sunxi/Kconfig
+++ b/drivers/pinctrl/sunxi/Kconfig
@@ -124,4 +124,9 @@ config PINCTRL_SUN50I_H616
 	default ARM64 && ARCH_SUNXI
 	select PINCTRL_SUNXI
 
+config PINCTRL_SUN50I_H616_R
+	bool "Support for the Allwinner H616 R-PIO"
+	default ARM64 && ARCH_SUNXI
+	select PINCTRL_SUNXI
+
 endif
diff --git a/drivers/pinctrl/sunxi/Makefile b/drivers/pinctrl/sunxi/Makefile
index 5359327a3c8f..d3440c42b9d6 100644
--- a/drivers/pinctrl/sunxi/Makefile
+++ b/drivers/pinctrl/sunxi/Makefile
@@ -24,5 +24,6 @@ obj-$(CONFIG_PINCTRL_SUN50I_H5)		+= pinctrl-sun50i-h5.o
 obj-$(CONFIG_PINCTRL_SUN50I_H6)		+= pinctrl-sun50i-h6.o
 obj-$(CONFIG_PINCTRL_SUN50I_H6_R)	+= pinctrl-sun50i-h6-r.o
 obj-$(CONFIG_PINCTRL_SUN50I_H616)	+= pinctrl-sun50i-h616.o
+obj-$(CONFIG_PINCTRL_SUN50I_H616_R)	+= pinctrl-sun50i-h616-r.o
 obj-$(CONFIG_PINCTRL_SUN9I_A80)		+= pinctrl-sun9i-a80.o
 obj-$(CONFIG_PINCTRL_SUN9I_A80_R)	+= pinctrl-sun9i-a80-r.o
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-h616-r.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-h616-r.c
new file mode 100644
index 000000000000..52783dd98b18
--- /dev/null
+++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-h616-r.c
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Allwinner H616 R_PIO pin controller driver
+ *
+ * Copyright (C) 2020 Arm Ltd.
+ * Based on former work, which is:
+ *   Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/reset.h>
+
+#include "pinctrl-sunxi.h"
+
+static const struct sunxi_desc_pin sun50i_h616_r_pins[] = {
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 0),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "s_i2c")),	/* SCK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 1),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "s_i2c")),	/* SDA */
+};
+
+static const struct sunxi_pinctrl_desc sun50i_h616_r_pinctrl_data = {
+	.pins = sun50i_h616_r_pins,
+	.npins = ARRAY_SIZE(sun50i_h616_r_pins),
+	.pin_base = PL_BASE,
+};
+
+static int sun50i_h616_r_pinctrl_probe(struct platform_device *pdev)
+{
+	return sunxi_pinctrl_init(pdev,
+				  &sun50i_h616_r_pinctrl_data);
+}
+
+static const struct of_device_id sun50i_h616_r_pinctrl_match[] = {
+	{ .compatible = "allwinner,sun50i-h616-r-pinctrl", },
+	{}
+};
+
+static struct platform_driver sun50i_h616_r_pinctrl_driver = {
+	.probe	= sun50i_h616_r_pinctrl_probe,
+	.driver	= {
+		.name		= "sun50i-h616-r-pinctrl",
+		.of_match_table	= sun50i_h616_r_pinctrl_match,
+	},
+};
+builtin_platform_driver(sun50i_h616_r_pinctrl_driver);
-- 
2.17.5


      parent reply	other threads:[~2020-12-11  1:21 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20201211011934.6171-1-andre.przywara@arm.com>
2020-12-11  1:19 ` [PATCH v2 02/21] dt-bindings: pinctrl: Add Allwinner H616 compatible strings Andre Przywara
2020-12-14  9:37   ` Maxime Ripard
2021-01-14  0:45     ` Andre Przywara
2021-01-14 11:57       ` Maxime Ripard
2020-12-11  1:19 ` [PATCH v2 03/21] pinctrl: sunxi: Add support for the Allwinner H616 pin controller Andre Przywara
2020-12-14  9:44   ` Maxime Ripard
2020-12-11  1:19 ` Andre Przywara [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201211011934.6171-5-andre.przywara@arm.com \
    --to=andre.przywara@arm.com \
    --cc=huangshuosheng@allwinnertech.com \
    --cc=icenowy@aosc.xyz \
    --cc=jernej.skrabec@siol.net \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mripard@kernel.org \
    --cc=peron.clem@gmail.com \
    --cc=robh@kernel.org \
    --cc=tiny.windzz@gmail.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox