From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: "Geert Uytterhoeven" <geert+renesas@glider.be>,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
"Sasha Levin" <sashal@kernel.org>,
linux-renesas-soc@vger.kernel.org, linux-gpio@vger.kernel.org
Subject: [PATCH AUTOSEL 5.14 01/99] pinctrl: renesas: rcar: Avoid changing PUDn when disabling bias
Date: Thu, 9 Sep 2021 20:14:20 -0400 [thread overview]
Message-ID: <20210910001558.173296-1-sashal@kernel.org> (raw)
From: Geert Uytterhoeven <geert+renesas@glider.be>
[ Upstream commit 7ebaa41047738d46fca6376b3f1765ef69c463c5 ]
When disabling pin bias, there is no need to touch the LSI pin
pull-up/down control register (PUDn), which selects between pull-up and
pull-down. Just disabling the pull-up/down function through the LSI pin
pull-enable register (PUENn) is sufficient.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/071ec644de2555da593a4531ef5d3e4d79cf997d.1625064076.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/renesas/pinctrl.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/pinctrl/renesas/pinctrl.c b/drivers/pinctrl/renesas/pinctrl.c
index bb488af29862..85cb78cfcfa6 100644
--- a/drivers/pinctrl/renesas/pinctrl.c
+++ b/drivers/pinctrl/renesas/pinctrl.c
@@ -898,17 +898,17 @@ void rcar_pinmux_set_bias(struct sh_pfc *pfc, unsigned int pin,
if (reg->puen) {
enable = sh_pfc_read(pfc, reg->puen) & ~BIT(bit);
- if (bias != PIN_CONFIG_BIAS_DISABLE)
+ if (bias != PIN_CONFIG_BIAS_DISABLE) {
enable |= BIT(bit);
- if (reg->pud) {
- updown = sh_pfc_read(pfc, reg->pud) & ~BIT(bit);
- if (bias == PIN_CONFIG_BIAS_PULL_UP)
- updown |= BIT(bit);
+ if (reg->pud) {
+ updown = sh_pfc_read(pfc, reg->pud) & ~BIT(bit);
+ if (bias == PIN_CONFIG_BIAS_PULL_UP)
+ updown |= BIT(bit);
- sh_pfc_write(pfc, reg->pud, updown);
+ sh_pfc_write(pfc, reg->pud, updown);
+ }
}
-
sh_pfc_write(pfc, reg->puen, enable);
} else {
enable = sh_pfc_read(pfc, reg->pud) & ~BIT(bit);
--
2.30.2
next reply other threads:[~2021-09-10 0:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-10 0:14 Sasha Levin [this message]
2021-09-10 0:14 ` [PATCH AUTOSEL 5.14 22/99] pinctrl: renesas: Fix pin control matching on R-Car H3e-2G Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210910001558.173296-1-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=geert+renesas@glider.be \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).