From: David Virag <virag.david003@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: David Virag <virag.david003@gmail.com>,
Tomasz Figa <tomasz.figa@gmail.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] pinctrl: samsung: Add Exynos7885 SoC specific data
Date: Sun, 31 Oct 2021 16:51:02 +0100 [thread overview]
Message-ID: <20211031155102.20225-1-virag.david003@gmail.com> (raw)
In-Reply-To: <20211031154851.20103-1-virag.david003@gmail.com>
Add Samsung Exynos7885 SoC specific data to enable pinctrl support for
all platforms based on Exynos7885.
Signed-off-by: David Virag <virag.david003@gmail.com>
---
.../pinctrl/samsung/pinctrl-exynos-arm64.c | 81 +++++++++++++++++++
drivers/pinctrl/samsung/pinctrl-samsung.c | 2 +
drivers/pinctrl/samsung/pinctrl-samsung.h | 1 +
3 files changed, 84 insertions(+)
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
index 6b77fd24571e..8bad82e709d3 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
@@ -441,6 +441,87 @@ const struct samsung_pinctrl_of_match_data exynos7_of_data __initconst = {
.num_ctrl = ARRAY_SIZE(exynos7_pin_ctrl),
};
+/* pin banks of exynos7885 pin-controller 0 (ALIVE) */
+static const struct samsung_pin_bank_data exynos7885_pin_banks0[] = {
+ EXYNOS_PIN_BANK_EINTN(3, 0x000, "etc0"),
+ EXYNOS_PIN_BANK_EINTN(3, 0x020, "etc1"),
+ EXYNOS850_PIN_BANK_EINTW(8, 0x040, "gpa0", 0x00),
+ EXYNOS850_PIN_BANK_EINTW(8, 0x060, "gpa1", 0x04),
+ EXYNOS850_PIN_BANK_EINTW(8, 0x080, "gpa2", 0x08),
+ EXYNOS850_PIN_BANK_EINTW(5, 0x0a0, "gpq0", 0x0c),
+};
+
+/* pin banks of exynos7885 pin-controller 1 (DISPAUD) */
+static const struct samsung_pin_bank_data exynos7885_pin_banks1[] = {
+ EXYNOS850_PIN_BANK_EINTG(5, 0x000, "gpb0", 0x00),
+ EXYNOS850_PIN_BANK_EINTG(4, 0x020, "gpb1", 0x04),
+ EXYNOS850_PIN_BANK_EINTG(5, 0x040, "gpb2", 0x08),
+};
+
+/* pin banks of exynos7885 pin-controller 2 (FSYS) */
+static const struct samsung_pin_bank_data exynos7885_pin_banks2[] = {
+ EXYNOS850_PIN_BANK_EINTG(4, 0x000, "gpf0", 0x00),
+ EXYNOS850_PIN_BANK_EINTG(8, 0x020, "gpf2", 0x04),
+ EXYNOS850_PIN_BANK_EINTG(6, 0x040, "gpf3", 0x08),
+ EXYNOS850_PIN_BANK_EINTG(6, 0x060, "gpf4", 0x0c),
+};
+
+/* pin banks of exynos7885 pin-controller 3 (TOP) */
+static const struct samsung_pin_bank_data exynos7885_pin_banks3[] = {
+ EXYNOS850_PIN_BANK_EINTG(4, 0x000, "gpp0", 0x00),
+ EXYNOS850_PIN_BANK_EINTG(3, 0x020, "gpg0", 0x04),
+ EXYNOS850_PIN_BANK_EINTG(4, 0x040, "gpp1", 0x08),
+ EXYNOS850_PIN_BANK_EINTG(4, 0x060, "gpp2", 0x0c),
+ EXYNOS850_PIN_BANK_EINTG(3, 0x080, "gpp3", 0x10),
+ EXYNOS850_PIN_BANK_EINTG(6, 0x0a0, "gpp4", 0x14),
+ EXYNOS850_PIN_BANK_EINTG(4, 0x0c0, "gpp5", 0x18),
+ EXYNOS850_PIN_BANK_EINTG(5, 0x0e0, "gpp6", 0x1c),
+ EXYNOS850_PIN_BANK_EINTG(2, 0x100, "gpp7", 0x20),
+ EXYNOS850_PIN_BANK_EINTG(2, 0x120, "gpp8", 0x24),
+ EXYNOS850_PIN_BANK_EINTG(8, 0x140, "gpg1", 0x28),
+ EXYNOS850_PIN_BANK_EINTG(8, 0x160, "gpg2", 0x2c),
+ EXYNOS850_PIN_BANK_EINTG(8, 0x180, "gpg3", 0x30),
+ EXYNOS850_PIN_BANK_EINTG(2, 0x1a0, "gpg4", 0x34),
+ EXYNOS850_PIN_BANK_EINTG(4, 0x1c0, "gpc0", 0x38),
+ EXYNOS850_PIN_BANK_EINTG(8, 0x1e0, "gpc1", 0x3c),
+ EXYNOS850_PIN_BANK_EINTG(8, 0x200, "gpc2", 0x40),
+};
+
+const struct samsung_pin_ctrl exynos7885_pin_ctrl[] = {
+ {
+ /* pin-controller instance 0 Alive data */
+ .pin_banks = exynos7885_pin_banks0,
+ .nr_banks = ARRAY_SIZE(exynos7885_pin_banks0),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .eint_wkup_init = exynos_eint_wkup_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
+ }, {
+ /* pin-controller instance 1 DISPAUD data */
+ .pin_banks = exynos7885_pin_banks1,
+ .nr_banks = ARRAY_SIZE(exynos7885_pin_banks1),
+ }, {
+ /* pin-controller instance 2 FSYS data */
+ .pin_banks = exynos7885_pin_banks2,
+ .nr_banks = ARRAY_SIZE(exynos7885_pin_banks2),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
+ }, {
+ /* pin-controller instance 3 TOP data */
+ .pin_banks = exynos7885_pin_banks3,
+ .nr_banks = ARRAY_SIZE(exynos7885_pin_banks3),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
+ },
+};
+
+const struct samsung_pinctrl_of_match_data exynos7885_of_data __initconst = {
+ .ctrl = exynos7885_pin_ctrl,
+ .num_ctrl = ARRAY_SIZE(exynos7885_pin_ctrl),
+};
+
/* pin banks of exynos850 pin-controller 0 (ALIVE) */
static const struct samsung_pin_bank_data exynos850_pin_banks0[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index 23f355ae9ca0..8941f658e7f1 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -1264,6 +1264,8 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
.data = &exynos5433_of_data },
{ .compatible = "samsung,exynos7-pinctrl",
.data = &exynos7_of_data },
+ { .compatible = "samsung,exynos7885-pinctrl",
+ .data = &exynos7885_of_data },
{ .compatible = "samsung,exynos850-pinctrl",
.data = &exynos850_of_data },
{ .compatible = "samsung,exynosautov9-pinctrl",
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h
index 547968a31aed..1f8d30ba05af 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.h
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.h
@@ -339,6 +339,7 @@ extern const struct samsung_pinctrl_of_match_data exynos5410_of_data;
extern const struct samsung_pinctrl_of_match_data exynos5420_of_data;
extern const struct samsung_pinctrl_of_match_data exynos5433_of_data;
extern const struct samsung_pinctrl_of_match_data exynos7_of_data;
+extern const struct samsung_pinctrl_of_match_data exynos7885_of_data;
extern const struct samsung_pinctrl_of_match_data exynos850_of_data;
extern const struct samsung_pinctrl_of_match_data exynosautov9_of_data;
extern const struct samsung_pinctrl_of_match_data s3c64xx_of_data;
--
2.33.1
next prev parent reply other threads:[~2021-10-31 15:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-31 15:48 [PATCH 1/2] dt-bindings: pinctrl: samsung: Document Exynos7885 David Virag
2021-10-31 15:51 ` David Virag [this message]
2021-10-31 21:00 ` [PATCH 2/2] pinctrl: samsung: Add Exynos7885 SoC specific data Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211031155102.20225-1-virag.david003@gmail.com \
--to=virag.david003@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.nawrocki@samsung.com \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).