[PATCH 00/11] Initial Fairphone 4 support

[PATCH 00/11] Initial Fairphone 4 support

[Luca Weiss]

This series adds basic support for the recently announced Fairphone 4
smartphone, based on the Snapdragon 750G (sm7225).

This adds support for UART, power & volume buttons, screen based on
simple-framebuffer, regulators and USB.

Luca Weiss (11):
  clk: qcom: add select QCOM_GDSC for SM6350
  dt-bindings: regulator: qcom,rpmh: Add compatible for PM6350
  regulator: qcom-rpmh: Add PM6350 regulators
  dt-bindings: pinctrl: qcom,pmic-gpio: Add compatible for PM6350
  pinctrl: qcom: spmi-gpio: Add compatible for PM6350
  arm64: dts: qcom: Add PM6350 PMIC
  arm64: dts: qcom: sm6350: add debug uart
  dt-bindings: arm: cpus: Add Kryo 570 CPUs
  dt-bindings: arm: qcom: Document sm7225 and fairphone,fp4 board
  arm64: dts: qcom: Add SM7225 device tree
  arm64: dts: qcom: sm7225: Add device tree for Fairphone 4

 .../devicetree/bindings/arm/cpus.yaml         |   1 +
 .../devicetree/bindings/arm/qcom.yaml         |   6 +
 .../bindings/pinctrl/qcom,pmic-gpio.yaml      |   2 +
 .../regulator/qcom,rpmh-regulator.yaml        |   2 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/pm6350.dtsi          |  54 +++
 arch/arm64/boot/dts/qcom/sm6350.dtsi          |  31 ++
 .../boot/dts/qcom/sm7225-fairphone-fp4.dts    | 322 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm7225.dtsi          |  16 +
 drivers/clk/qcom/Kconfig                      |   1 +
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c      |   1 +
 drivers/regulator/qcom-rpmh-regulator.c       |  32 ++
 12 files changed, 469 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm6350.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sm7225.dtsi

-- 
2.33.0

[PATCH 04/11] dt-bindings: pinctrl: qcom,pmic-gpio: Add compatible for PM6350

[Luca Weiss]

Add pmic-gpio compatible string for pm6350 pmic.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
index 9bd01db37dcd..1e5153f10ca1 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -21,6 +21,7 @@ properties:
           - qcom,pm660l-gpio
           - qcom,pm6150-gpio
           - qcom,pm6150l-gpio
+          - qcom,pm6350-gpio
           - qcom,pm7325-gpio
           - qcom,pm8005-gpio
           - qcom,pm8008-gpio
@@ -103,6 +104,7 @@ $defs:
           this subnode.  Valid pins are
                  - gpio1-gpio10 for pm6150
                  - gpio1-gpio12 for pm6150l
+                 - gpio1-gpio9 for pm6350
                  - gpio1-gpio10 for pm7325
                  - gpio1-gpio4 for pm8005
                  - gpio1-gpio2 for pm8008
-- 
2.33.0

[PATCH 05/11] pinctrl: qcom: spmi-gpio: Add compatible for PM6350

[Luca Weiss]

Add support for the GPIO controller in the pm6350 PMIC.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index 98bf0e2a2a8d..55a9227a87fd 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -1110,6 +1110,7 @@ static const struct of_device_id pmic_gpio_of_match[] = {
 	{ .compatible = "qcom,pm660l-gpio", .data = (void *) 12 },
 	{ .compatible = "qcom,pm6150-gpio", .data = (void *) 10 },
 	{ .compatible = "qcom,pm6150l-gpio", .data = (void *) 12 },
+	{ .compatible = "qcom,pm6350-gpio", .data = (void *) 9 },
 	{ .compatible = "qcom,pm7325-gpio", .data = (void *) 10 },
 	{ .compatible = "qcom,pm8005-gpio", .data = (void *) 4 },
 	{ .compatible = "qcom,pm8008-gpio", .data = (void *) 2 },
-- 
2.33.0

Re: [PATCH 00/11] Initial Fairphone 4 support

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 422 bytes --]

Hi!

> This series adds basic support for the recently announced Fairphone 4
> smartphone, based on the Snapdragon 750G (sm7225).
> 
> This adds support for UART, power & volume buttons, screen based on
> simple-framebuffer, regulators and USB.

Thanks for the series. Can I get you to cc phone-devel mailing list
with phone related stuff?

Thanks,
								Pavel
-- 
http://www.livejournal.com/~pavelmachek

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]