From: Colin Foster <colin.foster@in-advantage.com>
To: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Vladimir Oltean <vladimir.oltean@nxp.com>,
Claudiu Manoil <claudiu.manoil@nxp.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
UNGLinuxDriver@microchip.com, Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Ioana Ciornei <ioana.ciornei@nxp.com>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Lars Povlsen <lars.povlsen@microchip.com>,
Steen Hegelund <Steen.Hegelund@microchip.com>,
Linus Walleij <linus.walleij@linaro.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [RFC PATCH v4 net-next 07/23] net: dsa: ocelot: felix: add per-device-per-port quirks
Date: Mon, 15 Nov 2021 22:23:12 -0800 [thread overview]
Message-ID: <20211116062328.1949151-8-colin.foster@in-advantage.com> (raw)
In-Reply-To: <20211116062328.1949151-1-colin.foster@in-advantage.com>
Initial Felix-driver products (VSC9959 and VSC9953) both had quirks
where the PCS was in charge of rate adaptation. In the case of the
VSC7512 there is a differnce in that some ports (ports 0-3) don't have
a PCS and others might have different quirks based on how they are
configured.
This adds a generic method by which any port can have any quirks that
are handled by each device's driver.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
---
drivers/net/dsa/ocelot/felix.c | 20 +++++++++++++++++---
drivers/net/dsa/ocelot/felix.h | 4 ++++
drivers/net/dsa/ocelot/felix_vsc9959.c | 1 +
drivers/net/dsa/ocelot/seville_vsc9953.c | 1 +
4 files changed, 23 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index 615f6b84c688..f53db233148d 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -824,14 +824,25 @@ static void felix_phylink_mac_config(struct dsa_switch *ds, int port,
phylink_set_pcs(dp->pl, &felix->pcs[port]->pcs);
}
+unsigned long felix_quirks_have_rate_adaptation(struct ocelot *ocelot,
+ int port)
+{
+ return FELIX_MAC_QUIRKS;
+}
+EXPORT_SYMBOL(felix_quirks_have_rate_adaptation);
+
static void felix_phylink_mac_link_down(struct dsa_switch *ds, int port,
unsigned int link_an_mode,
phy_interface_t interface)
{
struct ocelot *ocelot = ds->priv;
+ unsigned long quirks;
+ struct felix *felix;
+ felix = ocelot_to_felix(ocelot);
+ quirks = felix->info->get_quirk_for_port(ocelot, port);
ocelot_phylink_mac_link_down(ocelot, port, link_an_mode, interface,
- FELIX_MAC_QUIRKS);
+ quirks);
}
static void felix_phylink_mac_link_up(struct dsa_switch *ds, int port,
@@ -842,11 +853,14 @@ static void felix_phylink_mac_link_up(struct dsa_switch *ds, int port,
bool tx_pause, bool rx_pause)
{
struct ocelot *ocelot = ds->priv;
- struct felix *felix = ocelot_to_felix(ocelot);
+ unsigned long quirks;
+ struct felix *felix;
+ felix = ocelot_to_felix(ocelot);
+ quirks = felix->info->get_quirk_for_port(ocelot, port);
ocelot_phylink_mac_link_up(ocelot, port, phydev, link_an_mode,
interface, speed, duplex, tx_pause, rx_pause,
- FELIX_MAC_QUIRKS);
+ quirks);
if (felix->info->port_sched_speed_set)
felix->info->port_sched_speed_set(ocelot, port, speed);
diff --git a/drivers/net/dsa/ocelot/felix.h b/drivers/net/dsa/ocelot/felix.h
index 81a86bd60f03..b5fa5b7325b1 100644
--- a/drivers/net/dsa/ocelot/felix.h
+++ b/drivers/net/dsa/ocelot/felix.h
@@ -48,6 +48,7 @@ struct felix_info {
u32 speed);
struct regmap *(*init_regmap)(struct ocelot *ocelot,
struct resource *res);
+ unsigned long (*get_quirk_for_port)(struct ocelot *ocelot, int port);
};
extern const struct dsa_switch_ops felix_switch_ops;
@@ -68,4 +69,7 @@ struct felix {
struct net_device *felix_port_to_netdev(struct ocelot *ocelot, int port);
int felix_netdev_to_port(struct net_device *dev);
+unsigned long felix_quirks_have_rate_adaptation(struct ocelot *ocelot,
+ int port);
+
#endif
diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 789e1ff0d13b..5056f39dc47e 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -1368,6 +1368,7 @@ static const struct felix_info felix_info_vsc9959 = {
.port_setup_tc = vsc9959_port_setup_tc,
.port_sched_speed_set = vsc9959_sched_speed_set,
.init_regmap = ocelot_regmap_init,
+ .get_quirk_for_port = felix_quirks_have_rate_adaptation,
};
static irqreturn_t felix_irq_handler(int irq, void *data)
diff --git a/drivers/net/dsa/ocelot/seville_vsc9953.c b/drivers/net/dsa/ocelot/seville_vsc9953.c
index 47da279a8ff7..362ba66401d8 100644
--- a/drivers/net/dsa/ocelot/seville_vsc9953.c
+++ b/drivers/net/dsa/ocelot/seville_vsc9953.c
@@ -1088,6 +1088,7 @@ static const struct felix_info seville_info_vsc9953 = {
.phylink_validate = vsc9953_phylink_validate,
.prevalidate_phy_mode = vsc9953_prevalidate_phy_mode,
.init_regmap = ocelot_regmap_init,
+ .get_quirk_for_port = felix_quirks_have_rate_adaptation,
};
static int seville_probe(struct platform_device *pdev)
--
2.25.1
next prev parent reply other threads:[~2021-11-16 6:24 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-16 6:23 [RFC PATCH v4 net-next 00/23] add support for VSC75XX control over SPI Colin Foster
2021-11-16 6:23 ` [RFC PATCH v4 net-next 01/23] net: dsa: ocelot: remove unnecessary pci_bar variables Colin Foster
2021-11-16 17:37 ` Florian Fainelli
2021-11-16 6:23 ` [RFC PATCH v4 net-next 02/23] net: mdio: mscc-miim: convert to a regmap implementation Colin Foster
2021-11-16 6:23 ` [RFC PATCH v4 net-next 03/23] net: dsa: ocelot: seville: utilize of_mdiobus_register Colin Foster
2021-11-16 11:21 ` Vladimir Oltean
2021-11-16 23:51 ` Florian Fainelli
2021-11-16 6:23 ` [RFC PATCH v4 net-next 04/23] net: dsa: ocelot: felix: switch to mdio-mscc-miim driver for indirect mdio access Colin Foster
2021-11-16 6:23 ` [RFC PATCH v4 net-next 05/23] net: dsa: ocelot: felix: Remove requirement for PCS in felix devices Colin Foster
2021-11-16 6:23 ` [RFC PATCH v4 net-next 06/23] net: dsa: ocelot: felix: add interface for custom regmaps Colin Foster
2021-11-16 6:23 ` Colin Foster [this message]
2021-11-16 6:23 ` [RFC PATCH v4 net-next 08/23] net: mscc: ocelot: split register definitions to a separate file Colin Foster
2021-11-16 6:23 ` [RFC PATCH v4 net-next 09/23] net: mscc: ocelot: expose ocelot wm functions Colin Foster
2021-11-16 6:23 ` [RFC PATCH v4 net-next 10/23] pinctrl: ocelot: combine get resource and ioremap into single call Colin Foster
2021-11-16 6:23 ` [RFC PATCH v4 net-next 11/23] pinctrl: ocelot: update pinctrl to automatic base address Colin Foster
2021-11-16 17:36 ` Alexandre Belloni
2021-11-17 13:47 ` Clément Léger
2021-11-19 2:16 ` Colin Foster
2021-11-16 6:23 ` [RFC PATCH v4 net-next 12/23] pinctrl: ocelot: convert pinctrl to regmap Colin Foster
2021-11-16 6:23 ` [RFC PATCH v4 net-next 13/23] pinctrl: ocelot: expose ocelot_pinctrl_core_probe interface Colin Foster
2021-11-16 6:23 ` [RFC PATCH v4 net-next 14/23] pinctrl: microchip-sgpio: update to support regmap Colin Foster
2021-11-16 6:23 ` [RFC PATCH v4 net-next 15/23] device property: add helper function fwnode_get_child_node_count Colin Foster
2021-11-16 8:23 ` Heikki Krogerus
2021-11-16 6:23 ` [RFC PATCH v4 net-next 16/23] pinctrl: microchip-sgpio: change device tree matches to use nodes instead of device Colin Foster
2021-11-16 6:23 ` [RFC PATCH v4 net-next 17/23] pinctrl: microchip-sgpio: expose microchip_sgpio_core_probe interface Colin Foster
2021-11-16 6:23 ` [RFC PATCH v4 net-next 18/23] net: phy: lynx: refactor Lynx PCS module to use generic phylink_pcs Colin Foster
2021-11-16 6:23 ` [RFC PATCH v4 net-next 19/23] net: dsa: felix: name change for clarity from pcs to mdio_device Colin Foster
2021-11-16 6:23 ` [RFC PATCH v4 net-next 20/23] net: dsa: seville: " Colin Foster
2021-11-16 6:23 ` [RFC PATCH v4 net-next 21/23] net: ethernet: enetc: " Colin Foster
2021-11-16 6:23 ` [RFC PATCH v4 net-next 22/23] net: pcs: lynx: use a common naming scheme for all lynx_pcs variables Colin Foster
2021-11-16 6:23 ` [RFC PATCH v4 net-next 23/23] net: dsa: ocelot: felix: add support for VSC75XX control over SPI Colin Foster
2021-11-16 10:34 ` [RFC PATCH v4 net-next 00/23] " Andy Shevchenko
2021-11-16 15:04 ` Colin Foster
2021-11-16 17:05 ` Andy Shevchenko
2021-11-16 11:10 ` Vladimir Oltean
2021-11-16 15:32 ` Colin Foster
2021-11-16 17:41 ` Vladimir Oltean
2021-11-16 22:56 ` Vladimir Oltean
2021-11-16 23:44 ` Colin Foster
2021-11-16 23:47 ` Vladimir Oltean
2021-11-19 1:58 ` Linus Walleij
2021-11-19 2:14 ` Colin Foster
2021-11-21 23:59 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211116062328.1949151-8-colin.foster@in-advantage.com \
--to=colin.foster@in-advantage.com \
--cc=Steen.Hegelund@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=andrew@lunn.ch \
--cc=andriy.shevchenko@linux.intel.com \
--cc=claudiu.manoil@nxp.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=hkallweit1@gmail.com \
--cc=ioana.ciornei@nxp.com \
--cc=kuba@kernel.org \
--cc=lars.povlsen@microchip.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=rafael@kernel.org \
--cc=vivien.didelot@gmail.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).