[PATCH v3 0/5] gpio: msc313: Add gpio support for ssd20xd

[Daniel Palmer <daniel@0x0f.com>]

Hi Linus and Bartosz,

As suggested by Linus I have dropped the DTS commits that were
in the series to add a usage of this code to a target.
If possible can you take the first 4 commits for the GPIO driver
for me? The final DTS commit will go via our tree.

Original blurb:

This is a little series to add a compatible string for the Sigmastar
SSD201 and SSD202D to the msc313 gpio driver, add the specific offsets
for the pins on these chips.

Changes since v2:
  - No code changes, dropped the UnitV2 DTS bits.
    I'll send a new series for that later.

Changes since v1:
  - Add a fix for the led binding to squash the warning about the
    activity trigger in the unitv2 dts.
  - Fix up the regulator node names so they pass dtb check

Daniel Palmer (5):
  dt-bindings: gpio: msc313: Add compatible for ssd20xd
  dt-bindings: gpio: msc313: Add offsets for ssd20xd
  gpio: msc313: Code clean ups
  gpio: msc313: Add support for SSD201 and SSD202D
  ARM: dts: mstar: Set gpio compatible for ssd20xd

 .../bindings/gpio/mstar,msc313-gpio.yaml      |   4 +-
 .../boot/dts/mstar-infinity2m-ssd20xd.dtsi    |   5 +
 drivers/gpio/gpio-msc313.c                    | 266 +++++++++++++++++-
 include/dt-bindings/gpio/msc313-gpio.h        |  71 +++++
 4 files changed, 341 insertions(+), 5 deletions(-)

-- 
2.34.1