From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
alsa-devel@alsa-project.org, patches@opensource.cirrus.com,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>,
Richard Fitzgerald <rf@opensource.cirrus.com>,
Linus Walleij <linus.walleij@linaro.org>,
Support Opensource <support.opensource@diasemi.com>
Subject: [PATCH v3 1/1] pinctrl: Propagate firmware node from a parent device
Date: Thu, 16 Dec 2021 17:12:27 +0200 [thread overview]
Message-ID: <20211216151227.58687-1-andriy.shevchenko@linux.intel.com> (raw)
When creating MFD platform devices the firmware node is left unset.
This, in particular, prevents GPIO library to use it for different
purposes. Propagate firmware node from the parent device and let
GPIO library do the right thing.
While at it, slightly modify the headers to reflect the usage of APIs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
v2: fixed more compilation errors brought by header reshuffling (LKP)
drivers/pinctrl/cirrus/pinctrl-madera-core.c | 5 ++++-
drivers/pinctrl/pinctrl-as3722.c | 13 +++++++------
drivers/pinctrl/pinctrl-da9062.c | 6 +++---
drivers/pinctrl/pinctrl-max77620.c | 11 +++++++----
drivers/pinctrl/pinctrl-rk805.c | 12 ++++++------
5 files changed, 27 insertions(+), 20 deletions(-)
diff --git a/drivers/pinctrl/cirrus/pinctrl-madera-core.c b/drivers/pinctrl/cirrus/pinctrl-madera-core.c
index dce2626384a9..e1cfbee3643a 100644
--- a/drivers/pinctrl/cirrus/pinctrl-madera-core.c
+++ b/drivers/pinctrl/cirrus/pinctrl-madera-core.c
@@ -8,8 +8,10 @@
#include <linux/err.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/slab.h>
+
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
@@ -1004,13 +1006,14 @@ static int madera_pin_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "%s\n", __func__);
+ device_set_node(&pdev->dev, dev_fwnode(pdev->dev.parent));
+
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->dev = &pdev->dev;
priv->madera = madera;
- pdev->dev.of_node = madera->dev->of_node;
switch (madera->type) {
case CS47L15:
diff --git a/drivers/pinctrl/pinctrl-as3722.c b/drivers/pinctrl/pinctrl-as3722.c
index 13c193156363..4313756b52e6 100644
--- a/drivers/pinctrl/pinctrl-as3722.c
+++ b/drivers/pinctrl/pinctrl-as3722.c
@@ -23,19 +23,20 @@
#include <linux/delay.h>
#include <linux/gpio/driver.h>
#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/mfd/as3722.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+
#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinmux.h>
-#include <linux/pm.h>
-#include <linux/slab.h>
#include "core.h"
#include "pinconf.h"
@@ -551,12 +552,13 @@ static int as3722_pinctrl_probe(struct platform_device *pdev)
struct as3722_pctrl_info *as_pci;
int ret;
+ device_set_node(&pdev->dev, dev_fwnode(pdev->dev.parent));
+
as_pci = devm_kzalloc(&pdev->dev, sizeof(*as_pci), GFP_KERNEL);
if (!as_pci)
return -ENOMEM;
as_pci->dev = &pdev->dev;
- as_pci->dev->of_node = pdev->dev.parent->of_node;
as_pci->as3722 = dev_get_drvdata(pdev->dev.parent);
platform_set_drvdata(pdev, as_pci);
@@ -578,7 +580,6 @@ static int as3722_pinctrl_probe(struct platform_device *pdev)
as_pci->gpio_chip = as3722_gpio_chip;
as_pci->gpio_chip.parent = &pdev->dev;
- as_pci->gpio_chip.of_node = pdev->dev.parent->of_node;
ret = gpiochip_add_data(&as_pci->gpio_chip, as_pci);
if (ret < 0) {
dev_err(&pdev->dev, "Couldn't register gpiochip, %d\n", ret);
diff --git a/drivers/pinctrl/pinctrl-da9062.c b/drivers/pinctrl/pinctrl-da9062.c
index 1c08579f0198..0e0ac3f3ffef 100644
--- a/drivers/pinctrl/pinctrl-da9062.c
+++ b/drivers/pinctrl/pinctrl-da9062.c
@@ -14,6 +14,7 @@
#include <linux/bits.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/gpio/driver.h>
@@ -256,6 +257,8 @@ static int da9062_pctl_probe(struct platform_device *pdev)
struct da9062_pctl *pctl;
int i;
+ device_set_node(&pdev->dev, dev_fwnode(pdev->dev.parent));
+
pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
if (!pctl)
return -ENOMEM;
@@ -277,9 +280,6 @@ static int da9062_pctl_probe(struct platform_device *pdev)
pctl->gc = reference_gc;
pctl->gc.label = dev_name(&pdev->dev);
pctl->gc.parent = &pdev->dev;
-#ifdef CONFIG_OF_GPIO
- pctl->gc.of_node = parent->of_node;
-#endif
platform_set_drvdata(pdev, pctl);
diff --git a/drivers/pinctrl/pinctrl-max77620.c b/drivers/pinctrl/pinctrl-max77620.c
index c643ed43ebbf..1ee94574f0af 100644
--- a/drivers/pinctrl/pinctrl-max77620.c
+++ b/drivers/pinctrl/pinctrl-max77620.c
@@ -10,14 +10,16 @@
*/
#include <linux/mfd/max77620.h>
+#include <linux/mod_devicetable.h>
#include <linux/module.h>
-#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinmux.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
#include "core.h"
#include "pinconf.h"
@@ -551,12 +553,13 @@ static int max77620_pinctrl_probe(struct platform_device *pdev)
struct max77620_pctrl_info *mpci;
int i;
+ device_set_node(&pdev->dev, dev_fwnode(pdev->dev.parent));
+
mpci = devm_kzalloc(&pdev->dev, sizeof(*mpci), GFP_KERNEL);
if (!mpci)
return -ENOMEM;
mpci->dev = &pdev->dev;
- mpci->dev->of_node = pdev->dev.parent->of_node;
mpci->rmap = max77620->rmap;
mpci->pins = max77620_pins_desc;
diff --git a/drivers/pinctrl/pinctrl-rk805.c b/drivers/pinctrl/pinctrl-rk805.c
index c6f4229eb106..7c1f7408fb9a 100644
--- a/drivers/pinctrl/pinctrl-rk805.c
+++ b/drivers/pinctrl/pinctrl-rk805.c
@@ -13,17 +13,17 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mfd/rk808.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+
#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinmux.h>
-#include <linux/pm.h>
-#include <linux/slab.h>
#include "core.h"
#include "pinconf.h"
@@ -420,18 +420,18 @@ static int rk805_pinctrl_probe(struct platform_device *pdev)
struct rk805_pctrl_info *pci;
int ret;
+ device_set_node(&pdev->dev, dev_fwnode(pdev->dev.parent));
+
pci = devm_kzalloc(&pdev->dev, sizeof(*pci), GFP_KERNEL);
if (!pci)
return -ENOMEM;
pci->dev = &pdev->dev;
- pci->dev->of_node = pdev->dev.parent->of_node;
pci->rk808 = dev_get_drvdata(pdev->dev.parent);
pci->pinctrl_desc = rk805_pinctrl_desc;
pci->gpio_chip = rk805_gpio_chip;
pci->gpio_chip.parent = &pdev->dev;
- pci->gpio_chip.of_node = pdev->dev.parent->of_node;
platform_set_drvdata(pdev, pci);
--
2.34.1
next reply other threads:[~2021-12-16 15:13 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-16 15:12 Andy Shevchenko [this message]
2021-12-16 15:15 ` [PATCH v3 1/1] pinctrl: Propagate firmware node from a parent device Adam Thomson
2021-12-17 11:33 ` Charles Keepax
2021-12-22 2:10 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211216151227.58687-1-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=ckeepax@opensource.cirrus.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=rf@opensource.cirrus.com \
--cc=support.opensource@diasemi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).