From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Wolfram Sang <wsa@kernel.org>, Jean Delvare <jdelvare@suse.de>,
Heiner Kallweit <hkallweit1@gmail.com>,
Lee Jones <lee.jones@linaro.org>,
Hans de Goede <hdegoede@redhat.com>,
Linus Walleij <linus.walleij@linaro.org>,
Tan Jui Nee <jui.nee.tan@intel.com>, Kate Hsuan <hpa@redhat.com>,
Jonathan Yong <jonathan.yong@intel.com>,
linux-kernel@vger.kernel.org, linux-edac@vger.kernel.org,
linux-i2c@vger.kernel.org, linux-gpio@vger.kernel.org,
platform-driver-x86@vger.kernel.org
Cc: Borislav Petkov <bp@alien8.de>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Tony Luck <tony.luck@intel.com>,
James Morse <james.morse@arm.com>,
Robert Richter <rric@kernel.org>,
Jean Delvare <jdelvare@suse.com>,
Peter Tyser <ptyser@xes-inc.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Andy Shevchenko <andy@kernel.org>,
Mark Gross <markgross@kernel.org>,
Henning Schild <henning.schild@siemens.com>
Subject: [PATCH v4 5/8] mfd: lpc_ich: Add support for pinctrl in non-ACPI system
Date: Mon, 31 Jan 2022 17:13:43 +0200 [thread overview]
Message-ID: <20220131151346.45792-6-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20220131151346.45792-1-andriy.shevchenko@linux.intel.com>
From: Tan Jui Nee <jui.nee.tan@intel.com>
Add support for non-ACPI systems, such as system that uses
Advanced Boot Loader (ABL) whereby a platform device has to be created
in order to bind with pin control and GPIO.
At the moment, Intel Apollo Lake In-Vehicle Infotainment (IVI) system
requires a driver to hide and unhide P2SB to lookup P2SB BAR and pass
the PCI BAR address to GPIO.
Signed-off-by: Tan Jui Nee <jui.nee.tan@intel.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/mfd/lpc_ich.c | 101 +++++++++++++++++++++++++++++++++++++++++-
1 file changed, 100 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c
index 95dca5434917..e1bca5325ce7 100644
--- a/drivers/mfd/lpc_ich.c
+++ b/drivers/mfd/lpc_ich.c
@@ -8,7 +8,8 @@
* Configuration Registers.
*
* This driver is derived from lpc_sch.
-
+ *
+ * Copyright (c) 2017, 2021-2022 Intel Corporation
* Copyright (c) 2011 Extreme Engineering Solution, Inc.
* Author: Aaron Sierra <asierra@xes-inc.com>
*
@@ -42,6 +43,7 @@
#include <linux/errno.h>
#include <linux/acpi.h>
#include <linux/pci.h>
+#include <linux/pinctrl/pinctrl.h>
#include <linux/mfd/core.h>
#include <linux/mfd/lpc_ich.h>
#include <linux/platform_data/itco_wdt.h>
@@ -140,6 +142,70 @@ static struct mfd_cell lpc_ich_gpio_cell = {
.ignore_resource_conflicts = true,
};
+#define APL_GPIO_NORTH 0
+#define APL_GPIO_NORTHWEST 1
+#define APL_GPIO_WEST 2
+#define APL_GPIO_SOUTHWEST 3
+#define APL_GPIO_NR_DEVICES 4
+
+/* Offset data for Apollo Lake GPIO controllers */
+#define APL_GPIO_NORTH_OFFSET 0xc50000
+#define APL_GPIO_NORTHWEST_OFFSET 0xc40000
+#define APL_GPIO_WEST_OFFSET 0xc70000
+#define APL_GPIO_SOUTHWEST_OFFSET 0xc00000
+
+#define APL_GPIO_IRQ 14
+
+static struct resource apl_gpio_resources[APL_GPIO_NR_DEVICES][2] = {
+ [APL_GPIO_NORTH] = {
+ DEFINE_RES_MEM(APL_GPIO_NORTH_OFFSET, 0x1000),
+ DEFINE_RES_IRQ(APL_GPIO_IRQ),
+ },
+ [APL_GPIO_NORTHWEST] = {
+ DEFINE_RES_MEM(APL_GPIO_NORTHWEST_OFFSET, 0x1000),
+ DEFINE_RES_IRQ(APL_GPIO_IRQ),
+ },
+ [APL_GPIO_WEST] = {
+ DEFINE_RES_MEM(APL_GPIO_WEST_OFFSET, 0x1000),
+ DEFINE_RES_IRQ(APL_GPIO_IRQ),
+ },
+ [APL_GPIO_SOUTHWEST] = {
+ DEFINE_RES_MEM(APL_GPIO_SOUTHWEST_OFFSET, 0x1000),
+ DEFINE_RES_IRQ(APL_GPIO_IRQ),
+ },
+};
+
+/* The order must be in sync with apl_pinctrl_soc_data */
+static const struct mfd_cell apl_gpio_devices[APL_GPIO_NR_DEVICES] = {
+ [APL_GPIO_NORTH] = {
+ .name = "apollolake-pinctrl",
+ .id = APL_GPIO_NORTH,
+ .num_resources = ARRAY_SIZE(apl_gpio_resources[APL_GPIO_NORTH]),
+ .resources = apl_gpio_resources[APL_GPIO_NORTH],
+ .ignore_resource_conflicts = true,
+ },
+ [APL_GPIO_NORTHWEST] = {
+ .name = "apollolake-pinctrl",
+ .id = APL_GPIO_NORTHWEST,
+ .num_resources = ARRAY_SIZE(apl_gpio_resources[APL_GPIO_NORTHWEST]),
+ .resources = apl_gpio_resources[APL_GPIO_NORTHWEST],
+ .ignore_resource_conflicts = true,
+ },
+ [APL_GPIO_WEST] = {
+ .name = "apollolake-pinctrl",
+ .id = APL_GPIO_WEST,
+ .num_resources = ARRAY_SIZE(apl_gpio_resources[APL_GPIO_WEST]),
+ .resources = apl_gpio_resources[APL_GPIO_WEST],
+ .ignore_resource_conflicts = true,
+ },
+ [APL_GPIO_SOUTHWEST] = {
+ .name = "apollolake-pinctrl",
+ .id = APL_GPIO_SOUTHWEST,
+ .num_resources = ARRAY_SIZE(apl_gpio_resources[APL_GPIO_SOUTHWEST]),
+ .resources = apl_gpio_resources[APL_GPIO_SOUTHWEST],
+ .ignore_resource_conflicts = true,
+ },
+};
static struct mfd_cell lpc_ich_spi_cell = {
.name = "intel-spi",
@@ -1083,6 +1149,33 @@ static int lpc_ich_init_wdt(struct pci_dev *dev)
return ret;
}
+static int lpc_ich_init_pinctrl(struct pci_dev *dev)
+{
+ struct resource base;
+ unsigned int i;
+ int ret;
+
+ /* Check, if GPIO has been exported as an ACPI device */
+ if (acpi_dev_present("INT3452", NULL, -1))
+ return -EEXIST;
+
+ ret = p2sb_bar(dev->bus, 0, &base);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < ARRAY_SIZE(apl_gpio_devices); i++) {
+ struct resource *mem = &apl_gpio_resources[i][0];
+
+ /* Fill MEM resource */
+ mem->start += base.start;
+ mem->end += base.start;
+ mem->flags = base.flags;
+ }
+
+ return mfd_add_devices(&dev->dev, 0, apl_gpio_devices,
+ ARRAY_SIZE(apl_gpio_devices), NULL, 0, NULL);
+}
+
static void lpc_ich_test_spi_write(struct pci_dev *dev, unsigned int devfn,
struct intel_spi_boardinfo *info)
{
@@ -1199,6 +1292,12 @@ static int lpc_ich_probe(struct pci_dev *dev,
cell_added = true;
}
+ if (priv->chipset == LPC_APL) {
+ ret = lpc_ich_init_pinctrl(dev);
+ if (!ret)
+ cell_added = true;
+ }
+
if (lpc_chipset_info[priv->chipset].spi_type) {
ret = lpc_ich_init_spi(dev);
if (!ret)
--
2.34.1
next prev parent reply other threads:[~2022-01-31 15:14 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-31 15:13 [PATCH v4 0/8] platform/x86: introduce p2sb_bar() helper Andy Shevchenko
2022-01-31 15:13 ` [PATCH v4 1/8] platform/x86/intel: Add Primary to Sideband (P2SB) bridge support Andy Shevchenko
2022-02-14 11:26 ` Hans de Goede
2022-05-05 14:55 ` Lukas Wunner
2022-05-05 17:54 ` Andy Shevchenko
2022-05-08 7:13 ` Lukas Wunner
2022-05-08 10:05 ` Andy Shevchenko
2022-05-08 10:50 ` Lukas Wunner
2022-01-31 15:13 ` [PATCH v4 2/8] pinctrl: intel: Check against matching data instead of ACPI companion Andy Shevchenko
2022-01-31 15:13 ` [PATCH v4 3/8] mfd: lpc_ich: Factor out lpc_ich_enable_spi_write() Andy Shevchenko
2022-01-31 15:13 ` [PATCH v4 4/8] mfd: lpc_ich: Switch to generic p2sb_bar() Andy Shevchenko
2022-01-31 15:13 ` Andy Shevchenko [this message]
2022-02-15 16:54 ` [PATCH v4 5/8] mfd: lpc_ich: Add support for pinctrl in non-ACPI system Lee Jones
2022-02-15 17:11 ` Andy Shevchenko
2022-02-15 17:29 ` Lee Jones
2022-05-02 16:14 ` Andy Shevchenko
2022-05-04 12:52 ` Andy Shevchenko
2022-03-07 18:21 ` Henning Schild
2022-03-07 19:03 ` Andy Shevchenko
2022-01-31 15:13 ` [PATCH v4 6/8] i2c: i801: convert to use common P2SB accessor Andy Shevchenko
2022-02-03 14:14 ` Jean Delvare
2022-02-07 12:11 ` Wolfram Sang
2022-01-31 15:13 ` [PATCH v4 7/8] EDAC, pnd2: Use proper I/O accessors and address space annotation Andy Shevchenko
2022-01-31 15:13 ` [PATCH v4 8/8] EDAC, pnd2: convert to use common P2SB accessor Andy Shevchenko
2022-03-07 17:27 ` [PATCH v4 0/8] platform/x86: introduce p2sb_bar() helper Henning Schild
2022-03-08 19:50 ` Henning Schild
2022-05-04 12:42 ` Andy Shevchenko
2022-05-04 15:10 ` Henning Schild
2022-05-04 15:55 ` Andy Shevchenko
2022-05-07 10:33 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220131151346.45792-6-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=andy@kernel.org \
--cc=bp@alien8.de \
--cc=hdegoede@redhat.com \
--cc=henning.schild@siemens.com \
--cc=hkallweit1@gmail.com \
--cc=hpa@redhat.com \
--cc=james.morse@arm.com \
--cc=jdelvare@suse.com \
--cc=jdelvare@suse.de \
--cc=jonathan.yong@intel.com \
--cc=jui.nee.tan@intel.com \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-edac@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=markgross@kernel.org \
--cc=mchehab@kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=ptyser@xes-inc.com \
--cc=rric@kernel.org \
--cc=tony.luck@intel.com \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).