linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <brgl@bgdev.pl>
Subject: [PATCH v1 1/3] gpiolib: sysfs: Move sysfs_emit() calls outside of the mutex lock
Date: Wed,  9 Feb 2022 13:31:15 +0200	[thread overview]
Message-ID: <20220209113117.25760-1-andriy.shevchenko@linux.intel.com> (raw)

In a few places we perform sysfs_emit() operations under mutex that
do not require any locking. Move them outside of the mutex locks.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/gpio/gpiolib-sysfs.c | 29 ++++++++++++++---------------
 1 file changed, 14 insertions(+), 15 deletions(-)

diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c
index 78ca7dee8b64..57d8ecab53b7 100644
--- a/drivers/gpio/gpiolib-sysfs.c
+++ b/drivers/gpio/gpiolib-sysfs.c
@@ -61,17 +61,16 @@ static ssize_t direction_show(struct device *dev,
 {
 	struct gpiod_data *data = dev_get_drvdata(dev);
 	struct gpio_desc *desc = data->desc;
-	ssize_t			status;
+	int value;
 
 	mutex_lock(&data->mutex);
 
 	gpiod_get_direction(desc);
-	status = sysfs_emit(buf, "%s\n",
-			    test_bit(FLAG_IS_OUT, &desc->flags) ? "out" : "in");
+	value = !!test_bit(FLAG_IS_OUT, &desc->flags);
 
 	mutex_unlock(&data->mutex);
 
-	return status;
+	return sysfs_emit(buf, "%s\n", value ? "out" : "in");
 }
 
 static ssize_t direction_store(struct device *dev,
@@ -108,12 +107,13 @@ static ssize_t value_show(struct device *dev,
 	mutex_lock(&data->mutex);
 
 	status = gpiod_get_value_cansleep(desc);
-	if (status >= 0)
-		status = sysfs_emit(buf, "%zd\n", status);
 
 	mutex_unlock(&data->mutex);
 
-	return status;
+	if (status < 0)
+		return status;
+
+	return sysfs_emit(buf, "%zd\n", status);
 }
 
 static ssize_t value_store(struct device *dev,
@@ -238,7 +238,6 @@ static ssize_t edge_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
 	struct gpiod_data *data = dev_get_drvdata(dev);
-	ssize_t	status = 0;
 	int i;
 
 	mutex_lock(&data->mutex);
@@ -247,12 +246,13 @@ static ssize_t edge_show(struct device *dev,
 		if (data->irq_flags == trigger_types[i].flags)
 			break;
 	}
-	if (i < ARRAY_SIZE(trigger_types))
-		status = sysfs_emit(buf, "%s\n", trigger_types[i].name);
 
 	mutex_unlock(&data->mutex);
 
-	return status;
+	if (i >= ARRAY_SIZE(trigger_types))
+		return 0;
+
+	return sysfs_emit(buf, "%s\n", trigger_types[i].name);
 }
 
 static ssize_t edge_store(struct device *dev,
@@ -324,16 +324,15 @@ static ssize_t active_low_show(struct device *dev,
 {
 	struct gpiod_data *data = dev_get_drvdata(dev);
 	struct gpio_desc *desc = data->desc;
-	ssize_t			status;
+	int value;
 
 	mutex_lock(&data->mutex);
 
-	status = sysfs_emit(buf, "%d\n",
-			    !!test_bit(FLAG_ACTIVE_LOW, &desc->flags));
+	value = !!test_bit(FLAG_ACTIVE_LOW, &desc->flags);
 
 	mutex_unlock(&data->mutex);
 
-	return status;
+	return sysfs_emit(buf, "%d\n", value);
 }
 
 static ssize_t active_low_store(struct device *dev,
-- 
2.34.1


             reply	other threads:[~2022-02-09 12:04 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-09 11:31 Andy Shevchenko [this message]
2022-02-09 11:31 ` [PATCH v1 2/3] gpiolib: sysfs: Move kstrtox() calls outside of the mutex lock Andy Shevchenko
2022-02-09 11:31 ` [PATCH v1 3/3] gpiolib: sysfs: Simplify edge handling in the code Andy Shevchenko
2022-02-16 15:03 ` [PATCH v1 1/3] gpiolib: sysfs: Move sysfs_emit() calls outside of the mutex lock Bartosz Golaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220209113117.25760-1-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=brgl@bgdev.pl \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).