[PATCH AUTOSEL 5.15 04/23] pinctrl: tigerlake: Revert "Add Alder Lake-M ACPI ID"

[PATCH AUTOSEL 5.15 04/23] pinctrl: tigerlake: Revert "Add Alder Lake-M ACPI ID"

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 6f66db29e2415cbe8759c48584f9cae19b3c2651 ]

It appears that last minute change moved ACPI ID of Alder Lake-M
to the INTC1055, which is already in the driver.

This ID on the other hand will be used elsewhere.

This reverts commit 258435a1c8187f559549e515d2f77fa0b57bcd27.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/intel/pinctrl-tigerlake.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/pinctrl/intel/pinctrl-tigerlake.c b/drivers/pinctrl/intel/pinctrl-tigerlake.c
index 0bcd19597e4ad..3ddaeffc04150 100644
--- a/drivers/pinctrl/intel/pinctrl-tigerlake.c
+++ b/drivers/pinctrl/intel/pinctrl-tigerlake.c
@@ -749,7 +749,6 @@ static const struct acpi_device_id tgl_pinctrl_acpi_match[] = {
 	{ "INT34C5", (kernel_ulong_t)&tgllp_soc_data },
 	{ "INT34C6", (kernel_ulong_t)&tglh_soc_data },
 	{ "INTC1055", (kernel_ulong_t)&tgllp_soc_data },
-	{ "INTC1057", (kernel_ulong_t)&tgllp_soc_data },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, tgl_pinctrl_acpi_match);
-- 
2.34.1

[PATCH AUTOSEL 5.15 15/23] gpio: Return EPROBE_DEFER if gc->to_irq is NULL

[Sasha Levin]

From: Shreeya Patel <shreeya.patel@collabora.com>

[ Upstream commit ae42f9288846353982e2eab181fb41e7fd8bf60f ]

We are racing the registering of .to_irq when probing the
i2c driver. This results in random failure of touchscreen
devices.

Following explains the race condition better.

[gpio driver] gpio driver registers gpio chip
[gpio consumer] gpio is acquired
[gpio consumer] gpiod_to_irq() fails with -ENXIO
[gpio driver] gpio driver registers irqchip
gpiod_to_irq works at this point, but -ENXIO is fatal

We could see the following errors in dmesg logs when gc->to_irq is NULL

[2.101857] i2c_hid i2c-FTS3528:00: HID over i2c has not been provided an Int IRQ
[2.101953] i2c_hid: probe of i2c-FTS3528:00 failed with error -22

To avoid this situation, defer probing until to_irq is registered.
Returning -EPROBE_DEFER would be the first step towards avoiding
the failure of devices due to the race in registration of .to_irq.
Final solution to this issue would be to avoid using gc irq members
until they are fully initialized.

This issue has been reported many times in past and people have been
using workarounds like changing the pinctrl_amd to built-in instead
of loading it as a module or by adding a softdep for pinctrl_amd into
the config file.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209413
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpiolib.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index d1b9b721218f2..08525988e64f2 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -3106,6 +3106,16 @@ int gpiod_to_irq(const struct gpio_desc *desc)
 
 		return retirq;
 	}
+#ifdef CONFIG_GPIOLIB_IRQCHIP
+	if (gc->irq.chip) {
+		/*
+		 * Avoid race condition with other code, which tries to lookup
+		 * an IRQ before the irqchip has been properly registered,
+		 * i.e. while gpiochip is still being brought up.
+		 */
+		return -EPROBE_DEFER;
+	}
+#endif
 	return -ENXIO;
 }
 EXPORT_SYMBOL_GPL(gpiod_to_irq);
-- 
2.34.1