From: Kent Gibson <warthog618@gmail.com>
To: linux-gpio@vger.kernel.org, brgl@bgdev.pl
Cc: Kent Gibson <warthog618@gmail.com>
Subject: [libgpiod v2][PATCH 1/4] core: add gpiod_request_lines
Date: Thu, 31 Mar 2022 09:11:38 +0800 [thread overview]
Message-ID: <20220331011141.53489-2-warthog618@gmail.com> (raw)
In-Reply-To: <20220331011141.53489-1-warthog618@gmail.com>
Add a wrapper around gpiod_chip_open() and gpiod_chip_request_lines()
for the common use case of only requesting a single set of lines from a
chip. The chip itself is only required for the request so hide it from
the user.
Signed-off-by: Kent Gibson<warthog618@gmail.com>
---
include/gpiod.h | 15 ++++++++
lib/line-request.c | 17 +++++++++
tests/tests-line-request.c | 73 ++++++++++++++++++++++++++++++++++++++
3 files changed, 105 insertions(+)
diff --git a/include/gpiod.h b/include/gpiod.h
index 456c2b8..8f64d7f 100644
--- a/include/gpiod.h
+++ b/include/gpiod.h
@@ -50,6 +50,21 @@ struct gpiod_info_event;
struct gpiod_edge_event;
struct gpiod_edge_event_buffer;
+/**
+ * @brief Request a set of lines for exclusive usage.
+ * @param path GPIO chip path.
+ * @param req_cfg Request config object.
+ * @param line_cfg Line config object.
+ * @return New line request object or NULL if an error occurred. The request
+ * must be released by the caller using ::gpiod_line_request_release.
+ * @note Line configuration overrides for lines that are not requested are
+ * silently ignored.
+ */
+struct gpiod_line_request *
+gpiod_request_lines(const char *path,
+ struct gpiod_request_config *req_cfg,
+ struct gpiod_line_config *line_cfg);
+
/**
* @defgroup chips GPIO chips
* @{
diff --git a/lib/line-request.c b/lib/line-request.c
index d578a9e..639a66f 100644
--- a/lib/line-request.c
+++ b/lib/line-request.c
@@ -16,6 +16,23 @@ struct gpiod_line_request {
int fd;
};
+GPIOD_API struct gpiod_line_request *
+gpiod_request_lines(const char *path,
+ struct gpiod_request_config *req_cfg,
+ struct gpiod_line_config *line_cfg)
+{
+ struct gpiod_chip *chip;
+ struct gpiod_line_request *request;
+
+ chip = gpiod_chip_open(path);
+ if (chip == NULL)
+ return NULL;
+
+ request = gpiod_chip_request_lines(chip, req_cfg, line_cfg);
+ gpiod_chip_close(chip);
+ return request;
+}
+
struct gpiod_line_request *
gpiod_line_request_from_uapi(struct gpio_v2_line_request *uapi_req)
{
diff --git a/tests/tests-line-request.c b/tests/tests-line-request.c
index 531e466..bf7ebb1 100644
--- a/tests/tests-line-request.c
+++ b/tests/tests-line-request.c
@@ -332,6 +332,79 @@ GPIOD_TEST_CASE(request_survives_parent_chip)
gpiod_test_return_if_failed();
}
+GPIOD_TEST_CASE(request_chipless)
+{
+ static const guint offset = 0;
+
+ g_autoptr(GPIOSimChip) sim = g_gpiosim_chip_new("num-lines", 4, NULL);
+ g_autoptr(struct_gpiod_request_config) req_cfg = NULL;
+ g_autoptr(struct_gpiod_line_config) line_cfg = NULL;
+ g_autoptr(struct_gpiod_line_request) request = NULL;
+ gint ret;
+
+ req_cfg = gpiod_test_create_request_config_or_fail();
+ line_cfg = gpiod_test_create_line_config_or_fail();
+
+ gpiod_request_config_set_offsets(req_cfg, 1, &offset);
+ gpiod_line_config_set_direction_default(line_cfg,
+ GPIOD_LINE_DIRECTION_OUTPUT);
+ gpiod_line_config_set_output_value_default(line_cfg,
+ GPIOD_LINE_VALUE_ACTIVE);
+
+ request = gpiod_request_lines(g_gpiosim_chip_get_dev_path(sim),
+ req_cfg, line_cfg);
+ g_assert_nonnull(request);
+
+ g_assert_cmpint(gpiod_line_request_get_value(request, offset), ==,
+ GPIOD_LINE_VALUE_ACTIVE);
+
+ ret = gpiod_line_request_set_value(request, offset,
+ GPIOD_LINE_VALUE_ACTIVE);
+ g_assert_cmpint(ret, ==, 0);
+ gpiod_test_return_if_failed();
+
+ ret = gpiod_line_request_set_value(request, offset,
+ GPIOD_LINE_VALUE_ACTIVE);
+ g_assert_cmpint(ret, ==, 0);
+ gpiod_test_return_if_failed();
+}
+
+GPIOD_TEST_CASE(request_chipless_bad_device)
+{
+ static const guint offset = 0;
+
+ g_autoptr(struct_gpiod_request_config) req_cfg = NULL;
+ g_autoptr(struct_gpiod_line_config) line_cfg = NULL;
+ g_autoptr(struct_gpiod_line_request) request = NULL;
+ gint ret;
+
+ req_cfg = gpiod_test_create_request_config_or_fail();
+ line_cfg = gpiod_test_create_line_config_or_fail();
+
+ gpiod_request_config_set_offsets(req_cfg, 1, &offset);
+ gpiod_line_config_set_direction_default(line_cfg,
+ GPIOD_LINE_DIRECTION_OUTPUT);
+ gpiod_line_config_set_output_value_default(line_cfg,
+ GPIOD_LINE_VALUE_ACTIVE);
+
+ request = gpiod_request_lines("/dev/nonexistent",
+ req_cfg, line_cfg);
+ g_assert_null(request);
+ gpiod_test_expect_errno(ENOENT);
+
+ request = gpiod_request_lines("/tmp",
+ req_cfg, line_cfg);
+ g_assert_null(request);
+ gpiod_test_expect_errno(ENOTTY);
+
+
+ request = gpiod_request_lines("/dev/null",
+ req_cfg, line_cfg);
+ g_assert_null(request);
+ gpiod_test_expect_errno(ENODEV);
+}
+
+
GPIOD_TEST_CASE(request_with_overridden_direction)
{
static const guint offsets[] = { 0, 1, 2, 3 };
--
2.35.1
next prev parent reply other threads:[~2022-03-31 1:12 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-31 1:11 [libgpiod v2][PATCH 0/4] core: add gpiod_request_lines Kent Gibson
2022-03-31 1:11 ` Kent Gibson [this message]
2022-03-31 1:11 ` [libgpiod v2][PATCH 2/4] tools: rename inexistent to nonexistent Kent Gibson
2022-03-31 1:11 ` [libgpiod v2][PATCH 3/4] tools: migrate to gpiod_request_lines Kent Gibson
2022-03-31 1:11 ` [libgpiod v2][PATCH 4/4] tools: minimize object lifetimes Kent Gibson
2022-04-02 12:47 ` [libgpiod v2][PATCH 0/4] core: add gpiod_request_lines Bartosz Golaszewski
2022-04-04 9:54 ` Kent Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220331011141.53489-2-warthog618@gmail.com \
--to=warthog618@gmail.com \
--cc=brgl@bgdev.pl \
--cc=linux-gpio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).