linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Marek Vasut <marex@denx.de>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Fabien Dessenne <fabien.dessenne@foss.st.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Marc Zyngier <maz@kernel.org>,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH 5.10 068/129] pinctrl: stm32: Keep pinctrl block clock enabled when LEVEL IRQ requested
Date: Wed,  4 May 2022 18:44:20 +0200	[thread overview]
Message-ID: <20220504153026.638578916@linuxfoundation.org> (raw)
In-Reply-To: <20220504153021.299025455@linuxfoundation.org>

From: Marek Vasut <marex@denx.de>

[ Upstream commit 05d8af449d93e04547b4c6b328e39c890bc803f4 ]

The current EOI handler for LEVEL triggered interrupts calls clk_enable(),
register IO, clk_disable(). The clock manipulation requires locking which
happens with IRQs disabled in clk_enable_lock(). Instead of turning the
clock on and off all the time, enable the clock in case LEVEL interrupt is
requested and keep the clock enabled until all LEVEL interrupts are freed.
The LEVEL interrupts are an exception on this platform and seldom used, so
this does not affect the common case.

This simplifies the LEVEL interrupt handling considerably and also fixes
the following splat found when using preempt-rt:
 ------------[ cut here ]------------
 WARNING: CPU: 0 PID: 0 at kernel/locking/rtmutex.c:2040 __rt_mutex_trylock+0x37/0x62
 Modules linked in:
 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.109-rt65-stable-standard-00068-g6a5afc4b1217 #85
 Hardware name: STM32 (Device Tree Support)
 [<c010a45d>] (unwind_backtrace) from [<c010766f>] (show_stack+0xb/0xc)
 [<c010766f>] (show_stack) from [<c06353ab>] (dump_stack+0x6f/0x84)
 [<c06353ab>] (dump_stack) from [<c01145e3>] (__warn+0x7f/0xa4)
 [<c01145e3>] (__warn) from [<c063386f>] (warn_slowpath_fmt+0x3b/0x74)
 [<c063386f>] (warn_slowpath_fmt) from [<c063b43d>] (__rt_mutex_trylock+0x37/0x62)
 [<c063b43d>] (__rt_mutex_trylock) from [<c063c053>] (rt_spin_trylock+0x7/0x16)
 [<c063c053>] (rt_spin_trylock) from [<c036a2f3>] (clk_enable_lock+0xb/0x80)
 [<c036a2f3>] (clk_enable_lock) from [<c036ba69>] (clk_core_enable_lock+0x9/0x18)
 [<c036ba69>] (clk_core_enable_lock) from [<c034e9f3>] (stm32_gpio_get+0x11/0x24)
 [<c034e9f3>] (stm32_gpio_get) from [<c034ef43>] (stm32_gpio_irq_trigger+0x1f/0x48)
 [<c034ef43>] (stm32_gpio_irq_trigger) from [<c014aa53>] (handle_fasteoi_irq+0x71/0xa8)
 [<c014aa53>] (handle_fasteoi_irq) from [<c0147111>] (generic_handle_irq+0x19/0x22)
 [<c0147111>] (generic_handle_irq) from [<c014752d>] (__handle_domain_irq+0x55/0x64)
 [<c014752d>] (__handle_domain_irq) from [<c0346f13>] (gic_handle_irq+0x53/0x64)
 [<c0346f13>] (gic_handle_irq) from [<c0100ba5>] (__irq_svc+0x65/0xc0)
 Exception stack(0xc0e01f18 to 0xc0e01f60)
 1f00:                                                       0000300c 00000000
 1f20: 0000300c c010ff01 00000000 00000000 c0e00000 c0e07714 00000001 c0e01f78
 1f40: c0e07758 00000000 ef7cd0ff c0e01f68 c010554b c0105542 40000033 ffffffff
 [<c0100ba5>] (__irq_svc) from [<c0105542>] (arch_cpu_idle+0xc/0x1e)
 [<c0105542>] (arch_cpu_idle) from [<c063be95>] (default_idle_call+0x21/0x3c)
 [<c063be95>] (default_idle_call) from [<c01324f7>] (do_idle+0xe3/0x1e4)
 [<c01324f7>] (do_idle) from [<c01327b3>] (cpu_startup_entry+0x13/0x14)
 [<c01327b3>] (cpu_startup_entry) from [<c0a00c13>] (start_kernel+0x397/0x3d4)
 [<c0a00c13>] (start_kernel) from [<00000000>] (0x0)
 ---[ end trace 0000000000000002 ]---

Power consumption measured on STM32MP157C DHCOM SoM is not increased or
is below noise threshold.

Fixes: 47beed513a85b ("pinctrl: stm32: Add level interrupt support to gpio irq chip")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Fabien Dessenne <fabien.dessenne@foss.st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
To: linux-gpio@vger.kernel.org
Reviewed-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Link: https://lore.kernel.org/r/20220421140827.214088-1-marex@denx.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/stm32/pinctrl-stm32.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
index 12d4d92c4a17..b017dd400c46 100644
--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -225,6 +225,13 @@ static void stm32_gpio_free(struct gpio_chip *chip, unsigned offset)
 	pinctrl_gpio_free(chip->base + offset);
 }
 
+static int stm32_gpio_get_noclk(struct gpio_chip *chip, unsigned int offset)
+{
+	struct stm32_gpio_bank *bank = gpiochip_get_data(chip);
+
+	return !!(readl_relaxed(bank->base + STM32_GPIO_IDR) & BIT(offset));
+}
+
 static int stm32_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
 	struct stm32_gpio_bank *bank = gpiochip_get_data(chip);
@@ -232,7 +239,7 @@ static int stm32_gpio_get(struct gpio_chip *chip, unsigned offset)
 
 	clk_enable(bank->clk);
 
-	ret = !!(readl_relaxed(bank->base + STM32_GPIO_IDR) & BIT(offset));
+	ret = stm32_gpio_get_noclk(chip, offset);
 
 	clk_disable(bank->clk);
 
@@ -316,7 +323,7 @@ static void stm32_gpio_irq_trigger(struct irq_data *d)
 		return;
 
 	/* If level interrupt type then retrig */
-	level = stm32_gpio_get(&bank->gpio_chip, d->hwirq);
+	level = stm32_gpio_get_noclk(&bank->gpio_chip, d->hwirq);
 	if ((level == 0 && bank->irq_type[d->hwirq] == IRQ_TYPE_LEVEL_LOW) ||
 	    (level == 1 && bank->irq_type[d->hwirq] == IRQ_TYPE_LEVEL_HIGH))
 		irq_chip_retrigger_hierarchy(d);
@@ -358,6 +365,7 @@ static int stm32_gpio_irq_request_resources(struct irq_data *irq_data)
 {
 	struct stm32_gpio_bank *bank = irq_data->domain->host_data;
 	struct stm32_pinctrl *pctl = dev_get_drvdata(bank->gpio_chip.parent);
+	unsigned long flags;
 	int ret;
 
 	ret = stm32_gpio_direction_input(&bank->gpio_chip, irq_data->hwirq);
@@ -371,6 +379,10 @@ static int stm32_gpio_irq_request_resources(struct irq_data *irq_data)
 		return ret;
 	}
 
+	flags = irqd_get_trigger_type(irq_data);
+	if (flags & IRQ_TYPE_LEVEL_MASK)
+		clk_enable(bank->clk);
+
 	return 0;
 }
 
@@ -378,6 +390,9 @@ static void stm32_gpio_irq_release_resources(struct irq_data *irq_data)
 {
 	struct stm32_gpio_bank *bank = irq_data->domain->host_data;
 
+	if (bank->irq_type[irq_data->hwirq] & IRQ_TYPE_LEVEL_MASK)
+		clk_disable(bank->clk);
+
 	gpiochip_unlock_as_irq(&bank->gpio_chip, irq_data->hwirq);
 }
 
-- 
2.35.1




      parent reply	other threads:[~2022-05-04 16:57 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20220504153021.299025455@linuxfoundation.org>
2022-05-04 16:44 ` [PATCH 5.10 061/129] pinctrl: stm32: Do not call stm32_gpio_get() for edge triggered IRQs in EOI Greg Kroah-Hartman
2022-05-04 16:44 ` Greg Kroah-Hartman [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220504153026.638578916@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=alexandre.torgue@foss.st.com \
    --cc=fabien.dessenne@foss.st.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=marex@denx.de \
    --cc=maz@kernel.org \
    --cc=sashal@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).