From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Marc Zyngier <maz@kernel.org>,
Hans de Goede <hdegoede@redhat.com>,
linux-gpio@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <brgl@bgdev.pl>,
Jonathan Corbet <corbet@lwn.net>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Andy Shevchenko <andy@kernel.org>
Subject: [PATCH v1 3/5] pinctrl: baytrail: make irq_chip immutable
Date: Thu, 12 May 2022 20:39:19 +0300 [thread overview]
Message-ID: <20220512173921.8210-3-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20220512173921.8210-1-andriy.shevchenko@linux.intel.com>
Since recently, the kernel is nagging about mutable irq_chips:
"not an immutable chip, please consider fixing it!"
Drop the unneeded copy, flag it as IRQCHIP_IMMUTABLE, add the new
helper functions and call the appropriate gpiolib functions.
While at it, switch to use hwirq variable instead of offset for
the sake of consistency.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/pinctrl/intel/pinctrl-baytrail.c | 42 ++++++++++++++----------
1 file changed, 25 insertions(+), 17 deletions(-)
diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c
index f89c9fcd4e1b..31f8f271628c 100644
--- a/drivers/pinctrl/intel/pinctrl-baytrail.c
+++ b/drivers/pinctrl/intel/pinctrl-baytrail.c
@@ -1350,15 +1350,15 @@ static void byt_irq_ack(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct intel_pinctrl *vg = gpiochip_get_data(gc);
- unsigned int offset = irqd_to_hwirq(d);
+ irq_hw_number_t hwirq = irqd_to_hwirq(d);
void __iomem *reg;
- reg = byt_gpio_reg(vg, offset, BYT_INT_STAT_REG);
+ reg = byt_gpio_reg(vg, hwirq, BYT_INT_STAT_REG);
if (!reg)
return;
raw_spin_lock(&byt_lock);
- writel(BIT(offset % 32), reg);
+ writel(BIT(hwirq % 32), reg);
raw_spin_unlock(&byt_lock);
}
@@ -1366,20 +1366,24 @@ static void byt_irq_mask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct intel_pinctrl *vg = gpiochip_get_data(gc);
+ irq_hw_number_t hwirq = irqd_to_hwirq(d);
- byt_gpio_clear_triggering(vg, irqd_to_hwirq(d));
+ byt_gpio_clear_triggering(vg, hwirq);
+ gpiochip_disable_irq(gc, hwirq);
}
static void byt_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct intel_pinctrl *vg = gpiochip_get_data(gc);
- unsigned int offset = irqd_to_hwirq(d);
+ irq_hw_number_t hwirq = irqd_to_hwirq(d);
unsigned long flags;
void __iomem *reg;
u32 value;
- reg = byt_gpio_reg(vg, offset, BYT_CONF0_REG);
+ gpiochip_enable_irq(gc, hwirq);
+
+ reg = byt_gpio_reg(vg, hwirq, BYT_CONF0_REG);
if (!reg)
return;
@@ -1412,12 +1416,13 @@ static void byt_irq_unmask(struct irq_data *d)
static int byt_irq_type(struct irq_data *d, unsigned int type)
{
struct intel_pinctrl *vg = gpiochip_get_data(irq_data_get_irq_chip_data(d));
- u32 offset = irqd_to_hwirq(d);
+ irq_hw_number_t hwirq = irqd_to_hwirq(d);
u32 value;
unsigned long flags;
- void __iomem *reg = byt_gpio_reg(vg, offset, BYT_CONF0_REG);
+ void __iomem *reg;
- if (!reg || offset >= vg->chip.ngpio)
+ reg = byt_gpio_reg(vg, hwirq, BYT_CONF0_REG);
+ if (!reg)
return -EINVAL;
raw_spin_lock_irqsave(&byt_lock, flags);
@@ -1447,6 +1452,16 @@ static int byt_irq_type(struct irq_data *d, unsigned int type)
return 0;
}
+static const struct irq_chip byt_gpio_irq_chip = {
+ .name = "BYT-GPIO",
+ .irq_ack = byt_irq_ack,
+ .irq_mask = byt_irq_mask,
+ .irq_unmask = byt_irq_unmask,
+ .irq_set_type = byt_irq_type,
+ .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_SET_TYPE_MASKED | IRQCHIP_IMMUTABLE,
+ GPIOCHIP_IRQ_RESOURCE_HELPERS,
+};
+
static void byt_gpio_irq_handler(struct irq_desc *desc)
{
struct irq_data *data = irq_desc_get_irq_data(desc);
@@ -1633,15 +1648,8 @@ static int byt_gpio_probe(struct intel_pinctrl *vg)
if (irq > 0) {
struct gpio_irq_chip *girq;
- vg->irqchip.name = "BYT-GPIO",
- vg->irqchip.irq_ack = byt_irq_ack,
- vg->irqchip.irq_mask = byt_irq_mask,
- vg->irqchip.irq_unmask = byt_irq_unmask,
- vg->irqchip.irq_set_type = byt_irq_type,
- vg->irqchip.flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_SET_TYPE_MASKED,
-
girq = &gc->irq;
- girq->chip = &vg->irqchip;
+ gpio_irq_chip_set_chip(girq, &byt_gpio_irq_chip);
girq->init_hw = byt_gpio_irq_init_hw;
girq->init_valid_mask = byt_init_irq_valid_mask;
girq->parent_handler = byt_gpio_irq_handler;
--
2.35.1
next prev parent reply other threads:[~2022-05-12 17:39 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-12 17:39 [PATCH v1 1/5] Documentation: gpio: Fix IRQ mask and unmask examples Andy Shevchenko
2022-05-12 17:39 ` [PATCH v1 2/5] Documentation: gpio: Advertise irqd_to_hwirq() helper in the examples Andy Shevchenko
2022-05-13 20:53 ` Linus Walleij
2022-05-12 17:39 ` Andy Shevchenko [this message]
2022-05-13 8:51 ` [PATCH v1 3/5] pinctrl: baytrail: make irq_chip immutable Mika Westerberg
2022-05-12 17:39 ` [PATCH v1 4/5] pinctrl: cherryview: " Andy Shevchenko
2022-05-13 8:52 ` Mika Westerberg
2022-05-12 17:39 ` [PATCH v1 5/5] pinctrl: lynxpoint: " Andy Shevchenko
2022-05-13 8:52 ` Mika Westerberg
2022-05-13 20:54 ` [PATCH v1 1/5] Documentation: gpio: Fix IRQ mask and unmask examples Linus Walleij
2022-05-16 17:22 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220512173921.8210-3-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=andy@kernel.org \
--cc=brgl@bgdev.pl \
--cc=corbet@lwn.net \
--cc=hdegoede@redhat.com \
--cc=linus.walleij@linaro.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maz@kernel.org \
--cc=mika.westerberg@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).