linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Tony Luck <tony.luck@intel.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Wolfram Sang <wsa@kernel.org>, Jean Delvare <jdelvare@suse.de>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Henning Schild <henning.schild@siemens.com>,
	Lee Jones <lee.jones@linaro.org>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	Hans de Goede <hdegoede@redhat.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Jonathan Yong <jonathan.yong@intel.com>,
	Guenter Roeck <linux@roeck-us.net>,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	linux-kernel@vger.kernel.org, linux-edac@vger.kernel.org,
	linux-i2c@vger.kernel.org, linux-leds@vger.kernel.org,
	linux-gpio@vger.kernel.org, platform-driver-x86@vger.kernel.org,
	linux-watchdog@vger.kernel.org
Cc: Borislav Petkov <bp@alien8.de>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	James Morse <james.morse@arm.com>,
	Robert Richter <rric@kernel.org>,
	Jean Delvare <jdelvare@suse.com>, Pavel Machek <pavel@ucw.cz>,
	Peter Tyser <ptyser@xes-inc.com>,
	Andy Shevchenko <andy@kernel.org>,
	Mark Gross <markgross@kernel.org>,
	Tan Jui Nee <jui.nee.tan@intel.com>
Subject: [PATCH v6 05/12] mfd: lpc_ich: Add support for pinctrl in non-ACPI system
Date: Mon,  6 Jun 2022 19:41:31 +0300	[thread overview]
Message-ID: <20220606164138.66535-6-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20220606164138.66535-1-andriy.shevchenko@linux.intel.com>

From: Tan Jui Nee <jui.nee.tan@intel.com>

Add support for non-ACPI systems, such as system that uses
Advanced Boot Loader (ABL) whereby a platform device has to be created
in order to bind with pin control and GPIO.

At the moment, Intel Apollo Lake In-Vehicle Infotainment (IVI) system
requires a driver to hide and unhide P2SB to lookup P2SB BAR and pass
the PCI BAR address to GPIO.

Signed-off-by: Tan Jui Nee <jui.nee.tan@intel.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/mfd/lpc_ich.c | 105 +++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 104 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c
index e360651c5406..650951f89f1c 100644
--- a/drivers/mfd/lpc_ich.c
+++ b/drivers/mfd/lpc_ich.c
@@ -8,7 +8,8 @@
  *  Configuration Registers.
  *
  *  This driver is derived from lpc_sch.
-
+ *
+ *  Copyright (c) 2017, 2021-2022 Intel Corporation
  *  Copyright (c) 2011 Extreme Engineering Solution, Inc.
  *  Author: Aaron Sierra <asierra@xes-inc.com>
  *
@@ -42,6 +43,7 @@
 #include <linux/errno.h>
 #include <linux/acpi.h>
 #include <linux/pci.h>
+#include <linux/pinctrl/pinctrl.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/lpc_ich.h>
 #include <linux/platform_data/itco_wdt.h>
@@ -142,6 +144,73 @@ static struct mfd_cell lpc_ich_gpio_cell = {
 	.ignore_resource_conflicts = true,
 };
 
+#define APL_GPIO_NORTH		0
+#define APL_GPIO_NORTHWEST	1
+#define APL_GPIO_WEST		2
+#define APL_GPIO_SOUTHWEST	3
+#define APL_GPIO_NR_DEVICES	4
+
+/* Offset data for Apollo Lake GPIO controllers */
+static resource_size_t apl_gpio_offsets[APL_GPIO_NR_DEVICES] = {
+	[APL_GPIO_NORTH]	= 0xc50000,
+	[APL_GPIO_NORTHWEST]	= 0xc40000,
+	[APL_GPIO_WEST]		= 0xc70000,
+	[APL_GPIO_SOUTHWEST]	= 0xc00000,
+};
+
+#define APL_GPIO_RESOURCE_SIZE		0x1000
+
+#define APL_GPIO_IRQ			14
+
+static struct resource apl_gpio_resources[APL_GPIO_NR_DEVICES][2] = {
+	[APL_GPIO_NORTH] = {
+		DEFINE_RES_MEM(0, 0),
+		DEFINE_RES_IRQ(APL_GPIO_IRQ),
+	},
+	[APL_GPIO_NORTHWEST] = {
+		DEFINE_RES_MEM(0, 0),
+		DEFINE_RES_IRQ(APL_GPIO_IRQ),
+	},
+	[APL_GPIO_WEST] = {
+		DEFINE_RES_MEM(0, 0),
+		DEFINE_RES_IRQ(APL_GPIO_IRQ),
+	},
+	[APL_GPIO_SOUTHWEST] = {
+		DEFINE_RES_MEM(0, 0),
+		DEFINE_RES_IRQ(APL_GPIO_IRQ),
+	},
+};
+
+static const struct mfd_cell apl_gpio_devices[APL_GPIO_NR_DEVICES] = {
+	[APL_GPIO_NORTH] = {
+		.name = "apollolake-pinctrl",
+		.id = APL_GPIO_NORTH,
+		.num_resources = ARRAY_SIZE(apl_gpio_resources[APL_GPIO_NORTH]),
+		.resources = apl_gpio_resources[APL_GPIO_NORTH],
+		.ignore_resource_conflicts = true,
+	},
+	[APL_GPIO_NORTHWEST] = {
+		.name = "apollolake-pinctrl",
+		.id = APL_GPIO_NORTHWEST,
+		.num_resources = ARRAY_SIZE(apl_gpio_resources[APL_GPIO_NORTHWEST]),
+		.resources = apl_gpio_resources[APL_GPIO_NORTHWEST],
+		.ignore_resource_conflicts = true,
+	},
+	[APL_GPIO_WEST] = {
+		.name = "apollolake-pinctrl",
+		.id = APL_GPIO_WEST,
+		.num_resources = ARRAY_SIZE(apl_gpio_resources[APL_GPIO_WEST]),
+		.resources = apl_gpio_resources[APL_GPIO_WEST],
+		.ignore_resource_conflicts = true,
+	},
+	[APL_GPIO_SOUTHWEST] = {
+		.name = "apollolake-pinctrl",
+		.id = APL_GPIO_SOUTHWEST,
+		.num_resources = ARRAY_SIZE(apl_gpio_resources[APL_GPIO_SOUTHWEST]),
+		.resources = apl_gpio_resources[APL_GPIO_SOUTHWEST],
+		.ignore_resource_conflicts = true,
+	},
+};
 
 static struct mfd_cell lpc_ich_spi_cell = {
 	.name = "intel-spi",
@@ -1085,6 +1154,34 @@ static int lpc_ich_init_wdt(struct pci_dev *dev)
 	return ret;
 }
 
+static int lpc_ich_init_pinctrl(struct pci_dev *dev)
+{
+	struct resource base;
+	unsigned int i;
+	int ret;
+
+	/* Check, if GPIO has been exported as an ACPI device */
+	if (acpi_dev_present("INT3452", NULL, -1))
+		return -EEXIST;
+
+	ret = p2sb_bar(dev->bus, 0, &base);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(apl_gpio_devices); i++) {
+		struct resource *mem = &apl_gpio_resources[i][0];
+		resource_size_t offset = apl_gpio_offsets[i];
+
+		/* Fill MEM resource */
+		mem->start = base.start + offset;
+		mem->end = base.start + offset + APL_GPIO_RESOURCE_SIZE - 1;
+		mem->flags = base.flags;
+	}
+
+	return mfd_add_devices(&dev->dev, 0, apl_gpio_devices,
+			       ARRAY_SIZE(apl_gpio_devices), NULL, 0, NULL);
+}
+
 static bool lpc_ich_byt_set_writeable(void __iomem *base, void *data)
 {
 	u32 val;
@@ -1235,6 +1332,12 @@ static int lpc_ich_probe(struct pci_dev *dev,
 			cell_added = true;
 	}
 
+	if (priv->chipset == LPC_APL) {
+		ret = lpc_ich_init_pinctrl(dev);
+		if (!ret)
+			cell_added = true;
+	}
+
 	if (lpc_chipset_info[priv->chipset].spi_type) {
 		ret = lpc_ich_init_spi(dev);
 		if (!ret)
-- 
2.35.1


  parent reply	other threads:[~2022-06-06 16:42 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-06 16:41 [PATCH v6 00/12] platform/x86: introduce p2sb_bar() helper Andy Shevchenko
2022-06-06 16:41 ` [PATCH v6 01/12] platform/x86/intel: Add Primary to Sideband (P2SB) bridge support Andy Shevchenko
2022-06-06 16:41 ` [PATCH v6 02/12] pinctrl: intel: Check against matching data instead of ACPI companion Andy Shevchenko
2022-06-06 16:41 ` [PATCH v6 03/12] mfd: lpc_ich: Factor out lpc_ich_enable_spi_write() Andy Shevchenko
2022-06-06 16:41 ` [PATCH v6 04/12] mfd: lpc_ich: Switch to generic p2sb_bar() Andy Shevchenko
2022-06-06 16:41 ` Andy Shevchenko [this message]
2022-06-06 16:41 ` [PATCH v6 06/12] i2c: i801: convert to use common P2SB accessor Andy Shevchenko
2022-06-06 16:41 ` [PATCH v6 07/12] EDAC, pnd2: Use proper I/O accessors and address space annotation Andy Shevchenko
2022-06-06 16:41 ` [PATCH v6 08/12] EDAC, pnd2: convert to use common P2SB accessor Andy Shevchenko
2022-06-06 16:41 ` [PATCH v6 09/12] watchdog: simatic-ipc-wdt: convert to use " Andy Shevchenko
2022-06-06 16:41 ` [PATCH v6 10/12] leds: simatic-ipc-leds: " Andy Shevchenko
2022-06-06 16:41 ` [PATCH v6 11/12] platform/x86: simatic-ipc: drop custom P2SB bar code Andy Shevchenko
2022-06-07 17:15   ` Hans de Goede
2022-06-06 16:41 ` [PATCH v6 12/12] leds: simatic-ipc-leds-gpio: add GPIO version of Siemens driver Andy Shevchenko
2022-08-01 14:09   ` Henning Schild
2022-08-02 10:54     ` Henning Schild
2022-06-07 17:16 ` [PATCH v6 00/12] platform/x86: introduce p2sb_bar() helper Hans de Goede
2022-06-08  7:42 ` Lee Jones
2022-06-08 10:50   ` Andy Shevchenko
2022-06-21 11:58     ` Andy Shevchenko
2022-06-29 16:39       ` Andy Shevchenko
2022-06-29 17:14         ` Henning Schild
2022-07-13 16:40           ` Andy Shevchenko
2022-07-13 16:51             ` Rafael J. Wysocki
2022-07-13 18:48             ` Henning Schild
2022-07-14  9:37               ` Lee Jones
2022-07-14 10:23                 ` Andy Shevchenko
2022-07-14 10:34                   ` Lee Jones
2022-07-14 11:03                     ` Henning Schild
2022-07-14 11:26   ` Pavel Machek
2022-07-14 12:10     ` Lee Jones
2022-07-17 10:27       ` Pavel Machek
2022-07-18 11:17 ` Andy Shevchenko
2022-08-10  7:38   ` Henning Schild

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220606164138.66535-6-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=andy@kernel.org \
    --cc=bp@alien8.de \
    --cc=hdegoede@redhat.com \
    --cc=henning.schild@siemens.com \
    --cc=hkallweit1@gmail.com \
    --cc=james.morse@arm.com \
    --cc=jdelvare@suse.com \
    --cc=jdelvare@suse.de \
    --cc=jonathan.yong@intel.com \
    --cc=jui.nee.tan@intel.com \
    --cc=lee.jones@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-edac@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=markgross@kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=pavel@ucw.cz \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=ptyser@xes-inc.com \
    --cc=rric@kernel.org \
    --cc=tony.luck@intel.com \
    --cc=wim@linux-watchdog.org \
    --cc=wsa@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).