[PATCH v2] gpio: dwapb: Don't print error on -EPROBE_DEFER

[Serge Semin <Sergey.Semin@baikalelectronics.ru>]

Currently if the APB or Debounce clocks aren't yet ready to be requested
the DW GPIO driver will correctly handle that by deferring the probe
procedure, but the error is still printed to the system log. It needlessly
pollutes the log since there was no real error but a request to postpone
the clock request procedure since the clocks subsystem hasn't been fully
initialized yet. Let's fix that by using the dev_err_probe method to print
the APB/clock request error status. It will correctly handle the deferred
probe situation and print the error if it actually happens.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>

---

Link: https://lore.kernel.org/linux-gpio/20220610075152.10214-1-Sergey.Semin@baikalelectronics.ru/
Changelog v2:
- Use the dev_err_probe() return value as the return status of the
  corresponding method. (@Philipp Zabel)
---
 drivers/gpio/gpio-dwapb.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
index b0f3aca61974..9467d695a33e 100644
--- a/drivers/gpio/gpio-dwapb.c
+++ b/drivers/gpio/gpio-dwapb.c
@@ -652,10 +652,9 @@ static int dwapb_get_clks(struct dwapb_gpio *gpio)
 	gpio->clks[1].id = "db";
 	err = devm_clk_bulk_get_optional(gpio->dev, DWAPB_NR_CLOCKS,
 					 gpio->clks);
-	if (err) {
-		dev_err(gpio->dev, "Cannot get APB/Debounce clocks\n");
-		return err;
-	}
+	if (err)
+		return dev_err_probe(gpio->dev, err,
+				     "Cannot get APB/Debounce clocks\n");
 
 	err = clk_bulk_prepare_enable(DWAPB_NR_CLOCKS, gpio->clks);
 	if (err) {
-- 
2.35.1