From: Kent Gibson <warthog618@gmail.com>
To: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
brgl@bgdev.pl, linus.walleij@linaro.org, dipenp@nvidia.com
Cc: Kent Gibson <warthog618@gmail.com>
Subject: [PATCH 4/6] gpiolib: cdev: simplify line event identification
Date: Wed, 13 Jul 2022 09:37:19 +0800 [thread overview]
Message-ID: <20220713013721.68879-5-warthog618@gmail.com> (raw)
In-Reply-To: <20220713013721.68879-1-warthog618@gmail.com>
Reorganise line event identification code to reduce code duplication,
and replace if-else initializers with the ternary equivalent to
improve readability.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
---
drivers/gpio/gpiolib-cdev.c | 42 ++++++++++++-------------------------
1 file changed, 13 insertions(+), 29 deletions(-)
diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c
index bc7c8822ede0..34d0bdfe5498 100644
--- a/drivers/gpio/gpiolib-cdev.c
+++ b/drivers/gpio/gpiolib-cdev.c
@@ -590,26 +590,20 @@ static enum hte_return process_hw_ts_thread(void *p)
switch (eflags) {
case GPIO_V2_LINE_FLAG_EDGE_BOTH:
- if (line->raw_level >= 0) {
- if (test_bit(FLAG_ACTIVE_LOW, &line->desc->flags))
- level = !line->raw_level;
- else
- level = line->raw_level;
- } else {
- level = gpiod_get_value_cansleep(line->desc);
- }
+ level = (line->raw_level >= 0) ?
+ line->raw_level :
+ gpiod_get_raw_value_cansleep(line->desc);
- if (level)
- le.id = GPIO_V2_LINE_EVENT_RISING_EDGE;
- else
- le.id = GPIO_V2_LINE_EVENT_FALLING_EDGE;
+ if (test_bit(FLAG_ACTIVE_LOW, &line->desc->flags))
+ level = !level;
+
+ le.id = level ? GPIO_V2_LINE_EVENT_RISING_EDGE :
+ GPIO_V2_LINE_EVENT_FALLING_EDGE;
break;
case GPIO_V2_LINE_FLAG_EDGE_RISING:
- /* Emit low-to-high event */
le.id = GPIO_V2_LINE_EVENT_RISING_EDGE;
break;
case GPIO_V2_LINE_FLAG_EDGE_FALLING:
- /* Emit high-to-low event */
le.id = GPIO_V2_LINE_EVENT_FALLING_EDGE;
break;
default:
@@ -684,20 +678,14 @@ static irqreturn_t edge_irq_thread(int irq, void *p)
switch (READ_ONCE(line->eflags)) {
case GPIO_V2_LINE_FLAG_EDGE_BOTH:
- if (gpiod_get_value_cansleep(line->desc))
- /* Emit low-to-high event */
- le.id = GPIO_V2_LINE_EVENT_RISING_EDGE;
- else
- /* Emit high-to-low event */
- le.id = GPIO_V2_LINE_EVENT_FALLING_EDGE;
-
+ le.id = gpiod_get_value_cansleep(line->desc) ?
+ GPIO_V2_LINE_EVENT_RISING_EDGE :
+ GPIO_V2_LINE_EVENT_FALLING_EDGE;
break;
case GPIO_V2_LINE_FLAG_EDGE_RISING:
- /* Emit low-to-high event */
le.id = GPIO_V2_LINE_EVENT_RISING_EDGE;
break;
case GPIO_V2_LINE_FLAG_EDGE_FALLING:
- /* Emit high-to-low event */
le.id = GPIO_V2_LINE_EVENT_FALLING_EDGE;
break;
default:
@@ -821,12 +809,8 @@ static void debounce_work_func(struct work_struct *work)
le.line_seqno : atomic_inc_return(&lr->seqno);
}
- if (level)
- /* Emit low-to-high event */
- le.id = GPIO_V2_LINE_EVENT_RISING_EDGE;
- else
- /* Emit high-to-low event */
- le.id = GPIO_V2_LINE_EVENT_FALLING_EDGE;
+ le.id = level ? GPIO_V2_LINE_EVENT_RISING_EDGE :
+ GPIO_V2_LINE_EVENT_FALLING_EDGE;
linereq_put_event(lr, &le);
}
--
2.37.0
next prev parent reply other threads:[~2022-07-13 1:38 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-13 1:37 [PATCH 0/6] gpiolib: cdev: code cleanup following hte integration Kent Gibson
2022-07-13 1:37 ` [PATCH 1/6] gpiolib: cdev: simplify linereq_free Kent Gibson
2022-07-18 9:27 ` Linus Walleij
2022-07-13 1:37 ` [PATCH 2/6] gpiolib: cdev: simplify parameter in call to hte_edge_setup Kent Gibson
2022-07-13 1:37 ` [PATCH 3/6] gpiolib: cdev: replace if-else chains with switches Kent Gibson
2022-07-13 1:37 ` Kent Gibson [this message]
2022-07-13 9:59 ` [PATCH 4/6] gpiolib: cdev: simplify line event identification Andy Shevchenko
2022-07-13 10:27 ` Kent Gibson
2022-07-13 11:24 ` Andy Shevchenko
2022-07-14 0:32 ` Kent Gibson
2022-07-13 1:37 ` [PATCH 5/6] gpiolib: cdev: consolidate edge detector configuration flags Kent Gibson
2022-07-13 10:07 ` Andy Shevchenko
2022-07-13 10:24 ` Kent Gibson
2022-07-13 11:29 ` Andy Shevchenko
2022-07-13 1:37 ` [PATCH 6/6] gpiolib: cdev: compile out HTE unless CONFIG_HTE selected Kent Gibson
2022-07-13 10:03 ` Andy Shevchenko
2022-07-13 10:30 ` Kent Gibson
2022-07-14 1:08 ` Kent Gibson
2022-07-13 10:08 ` [PATCH 0/6] gpiolib: cdev: code cleanup following hte integration Andy Shevchenko
2022-07-15 2:06 ` Dipen Patel
2022-07-15 2:08 ` Kent Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220713013721.68879-5-warthog618@gmail.com \
--to=warthog618@gmail.com \
--cc=brgl@bgdev.pl \
--cc=dipenp@nvidia.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).