linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marek Vasut <marex@denx.de>
To: linux-gpio@vger.kernel.org
Cc: Marek Vasut <marex@denx.de>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Loic Poulain <loic.poulain@linaro.org>,
	Marc Zyngier <maz@kernel.org>, NXP Linux Team <linux-imx@nxp.com>,
	Peng Fan <peng.fan@nxp.com>, Shawn Guo <shawnguo@kernel.org>
Subject: [PATCH v5 1/2] gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock
Date: Mon, 25 Jul 2022 12:34:44 +0200	[thread overview]
Message-ID: <20220725103445.88674-2-marex@denx.de> (raw)
In-Reply-To: <20220725103445.88674-1-marex@denx.de>

The driver currently performs register read-modify-write without locking
in its irqchip part, this could lead to a race condition when configuring
interrupt mode setting. Add the missing bgpio spinlock lock/unlock around
the register read-modify-write.

Fixes: 07bd1a6cc7cbb ("MXC arch: Add gpio support for the whole platform")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
---
V3: New patch
V4: Include linux/spinlock.h
V5: Use raw_spinlock per 3c938cc5cebcb ("gpio: use raw spinlock for gpio chip shadowed data")
---
 drivers/gpio/gpio-mxc.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index c871602fc5ba9..6cc98a5684ae1 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/spinlock.h>
 #include <linux/syscore_ops.h>
 #include <linux/gpio/driver.h>
 #include <linux/of.h>
@@ -147,6 +148,7 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type)
 {
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
 	struct mxc_gpio_port *port = gc->private;
+	unsigned long flags;
 	u32 bit, val;
 	u32 gpio_idx = d->hwirq;
 	int edge;
@@ -185,6 +187,8 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type)
 		return -EINVAL;
 	}
 
+	raw_spin_lock_irqsave(&port->gc.bgpio_lock, flags);
+
 	if (GPIO_EDGE_SEL >= 0) {
 		val = readl(port->base + GPIO_EDGE_SEL);
 		if (edge == GPIO_INT_BOTH_EDGES)
@@ -204,15 +208,20 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type)
 
 	writel(1 << gpio_idx, port->base + GPIO_ISR);
 
+	raw_spin_unlock_irqrestore(&port->gc.bgpio_lock, flags);
+
 	return 0;
 }
 
 static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
 {
 	void __iomem *reg = port->base;
+	unsigned long flags;
 	u32 bit, val;
 	int edge;
 
+	raw_spin_lock_irqsave(&port->gc.bgpio_lock, flags);
+
 	reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
 	bit = gpio & 0xf;
 	val = readl(reg);
@@ -230,6 +239,8 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
 		return;
 	}
 	writel(val | (edge << (bit << 1)), reg);
+
+	raw_spin_unlock_irqrestore(&port->gc.bgpio_lock, flags);
 }
 
 /* handle 32 interrupts in one status register */
-- 
2.35.1


  reply	other threads:[~2022-07-25 10:35 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-25 10:34 [PATCH v5 0/2] gpio: mxc: Locking and direction input fix Marek Vasut
2022-07-25 10:34 ` Marek Vasut [this message]
2022-07-25 22:36   ` [PATCH v5 1/2] gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock Linus Walleij
2022-07-25 10:34 ` [PATCH v5 2/2] gpio: mxc: Always set GPIOs used as interrupt source to INPUT mode Marek Vasut
2022-07-25 20:40   ` Andy Shevchenko
2022-07-25 15:50 ` [PATCH v5 0/2] gpio: mxc: Locking and direction input fix Marc Zyngier
2022-08-23 10:41   ` Marek Vasut
2022-08-23 14:20     ` Marc Zyngier
2022-09-29 17:35       ` Marek Vasut
2022-08-26  8:40 ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220725103445.88674-2-marex@denx.de \
    --to=marex@denx.de \
    --cc=bgolaszewski@baylibre.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=loic.poulain@linaro.org \
    --cc=maz@kernel.org \
    --cc=peng.fan@nxp.com \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).