linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>
To: <linux-gpio@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <UNGLinuxDriver@microchip.com>, <gregkh@linuxfoundation.org>,
	<arnd@arndb.de>, <dragan.cvetic@xilinx.com>,
	<derek.kiernan@xilinx.com>
Subject: [PATCH v1 char-misc-next 3/5] misc: microchip: pci1xxxx: Add functions to configure gpio pins as input / output, get status, handle I/O for gpio pins.
Date: Thu, 25 Aug 2022 01:30:45 +0530	[thread overview]
Message-ID: <20220824200047.150308-4-kumaravel.thiagarajan@microchip.com> (raw)
In-Reply-To: <20220824200047.150308-1-kumaravel.thiagarajan@microchip.com>

direction_input and direction_output functions configures a gpio pin as
input and output respectively. get_direction function returns if a gpio
pin is output or input. get function returns the value of a gpio pin
whereas set function assigns output value for a gpio pin.

Signed-off-by: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>
---
 .../misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c   | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)

diff --git a/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c
index 97ed7ae1baaa..45e197fe3a3e 100644
--- a/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c
+++ b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c
@@ -13,6 +13,10 @@
 #include "mchp_pci1xxxx_gp.h"
 
 #define PCI1XXXX_NR_PINS		93
+#define OUT_EN_OFFSET(x)		((((x) / 32) * 4) + 0x400)
+#define INP_EN_OFFSET(x)		((((x) / 32) * 4) + 0x400 + 0x10)
+#define OUT_OFFSET(x)			((((x) / 32) * 4) + 0x400 + 0x20)
+#define INP_OFFSET(x)			((((x) / 32) * 4) + 0x400 + 0x30)
 #define PULLUP_OFFSET(x)		((((x) / 32) * 4) + 0x400 + 0x40)
 #define PULLDOWN_OFFSET(x)		((((x) / 32) * 4) + 0x400 + 0x50)
 #define OPENDRAIN_OFFSET(x)		((((x) / 32) * 4) + 0x400 + 0x60)
@@ -30,6 +34,24 @@ struct pci1xxxx_gpio {
 	int irq_base;
 };
 
+static int pci1xxxx_gpio_get_direction(struct gpio_chip *gpio, unsigned int nr)
+{
+	struct pci1xxxx_gpio *priv = gpiochip_get_data(gpio);
+	u32 data;
+	int ret = -EINVAL;
+
+	data = readl(priv->reg_base + INP_EN_OFFSET(nr));
+	if (data & BIT(nr % 32)) {
+		ret =  1;
+	} else {
+		data = readl(priv->reg_base + OUT_EN_OFFSET(nr));
+		if (data & BIT(nr % 32))
+			ret =  0;
+	}
+
+	return ret;
+}
+
 static inline void pci1xxx_assign_bit(void __iomem *base_addr, unsigned int reg_offset,
 				      unsigned int bitpos, bool set)
 {
@@ -43,6 +65,58 @@ static inline void pci1xxx_assign_bit(void __iomem *base_addr, unsigned int reg_
 	writel(data, base_addr + reg_offset);
 }
 
+static int pci1xxxx_gpio_direction_input(struct gpio_chip *gpio, unsigned int nr)
+{
+	struct pci1xxxx_gpio *priv = gpiochip_get_data(gpio);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	pci1xxx_assign_bit(priv->reg_base, INP_EN_OFFSET(nr), (nr % 32), true);
+	pci1xxx_assign_bit(priv->reg_base, OUT_EN_OFFSET(nr), (nr % 32), false);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static int pci1xxxx_gpio_get(struct gpio_chip *gpio, unsigned int nr)
+{
+	struct pci1xxxx_gpio *priv = gpiochip_get_data(gpio);
+
+	return (readl(priv->reg_base + INP_OFFSET(nr)) >> (nr % 32)) & 1;
+}
+
+static int pci1xxxx_gpio_direction_output(struct gpio_chip *gpio,
+					  unsigned int nr, int val)
+{
+	struct pci1xxxx_gpio *priv = gpiochip_get_data(gpio);
+	unsigned long flags;
+	u32 data;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	pci1xxx_assign_bit(priv->reg_base, INP_EN_OFFSET(nr), (nr % 32), false);
+	pci1xxx_assign_bit(priv->reg_base, OUT_EN_OFFSET(nr), (nr % 32), true);
+	data = readl(priv->reg_base + OUT_OFFSET(nr));
+	if (val)
+		data |= (1 << (nr % 32));
+	else
+		data &= ~(1 << (nr % 32));
+	writel(data, priv->reg_base + OUT_OFFSET(nr));
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static void pci1xxxx_gpio_set(struct gpio_chip *gpio,
+			      unsigned int nr, int val)
+{
+	struct pci1xxxx_gpio *priv = gpiochip_get_data(gpio);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	pci1xxx_assign_bit(priv->reg_base, OUT_OFFSET(nr), (nr % 32), val);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
 static int pci1xxxx_gpio_set_config(struct gpio_chip *gpio, unsigned int offset,
 				    unsigned long config)
 {
@@ -81,6 +155,11 @@ static int pci1xxxx_gpio_setup(struct pci1xxxx_gpio *priv, int irq)
 	gchip->label = dev_name(&priv->aux_dev->dev);
 	gchip->parent = &priv->aux_dev->dev;
 	gchip->owner = THIS_MODULE;
+	gchip->direction_input = pci1xxxx_gpio_direction_input;
+	gchip->direction_output = pci1xxxx_gpio_direction_output;
+	gchip->get_direction = pci1xxxx_gpio_get_direction;
+	gchip->get = pci1xxxx_gpio_get;
+	gchip->set = pci1xxxx_gpio_set;
 	gchip->set_config = pci1xxxx_gpio_set_config;
 	gchip->dbg_show = NULL;
 	gchip->base = -1;
-- 
2.25.1


  parent reply	other threads:[~2022-08-24 14:29 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-24 20:00 [PATCH v1 char-misc-next 0/5] misc: microchip: pci1xxxx: Add auxiliary bus driver and the GPIO driver for PIO function of pci1xxxx Kumaravel Thiagarajan
2022-08-24 20:00 ` [PATCH v1 char-misc-next 1/5] misc: microchip: pci1xxxx: load auxiliary bus driver for the PIO function in the multi-function endpoint of pci1xxxx device Kumaravel Thiagarajan
2022-08-24 20:00 ` [PATCH v1 char-misc-next 2/5] misc: microchip: pci1xxxx: load gpio driver for the gpio controller auxiliary device enumerated by the auxiliary bus driver Kumaravel Thiagarajan
2023-02-17 10:31   ` Michael Walle
2023-02-23 10:23     ` Linus Walleij
2023-02-23 10:29       ` Michael Walle
2022-08-24 20:00 ` Kumaravel Thiagarajan [this message]
2022-08-24 20:00 ` [PATCH v1 char-misc-next 4/5] misc: microchip: pci1xxxx: Add gpio irq handler and irq helper functions irq_ack, irq_mask, irq_unmask and irq_set_type of irq_chip Kumaravel Thiagarajan
2022-08-24 20:00 ` [PATCH v1 char-misc-next 5/5] misc: microchip: pci1xxxx: Add power management functions - suspend & resume handlers Kumaravel Thiagarajan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220824200047.150308-4-kumaravel.thiagarajan@microchip.com \
    --to=kumaravel.thiagarajan@microchip.com \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=arnd@arndb.de \
    --cc=derek.kiernan@xilinx.com \
    --cc=dragan.cvetic@xilinx.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).