From: "Nuno Sá" <nuno.sa@analog.com>
To: linux-kernel@vger.kernel.org,
"Bartosz Golaszewski" <brgl@bgdev.pl>,
"Dmitry Torokhov" <dmitry.torokhov@gmail.com>,
devicetree@vger.kernel.org, linux-gpio@vger.kernel.org,
"Linus Walleij" <linus.walleij@linaro.org>,
linux-input@vger.kernel.org, "Nuno Sá" <nuno.sa@analog.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Michael Hennerich <michael.hennerich@analog.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v4 05/10] dt-bindings: input: adp5588: add bindings
Date: Mon, 29 Aug 2022 15:15:48 +0200 [thread overview]
Message-ID: <20220829131553.690063-6-nuno.sa@analog.com> (raw)
In-Reply-To: <20220829131553.690063-1-nuno.sa@analog.com>
Add device tree bindings for the adp5588-keys driver.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../bindings/input/adi,adp5588.yaml | 111 ++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 112 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/adi,adp5588.yaml
diff --git a/Documentation/devicetree/bindings/input/adi,adp5588.yaml b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
new file mode 100644
index 000000000000..26ea66834ae2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/adi,adp5588.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADP5588 Keypad Controller
+
+maintainers:
+ - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+ Analog Devices Mobile I/O Expander and QWERTY Keypad Controller
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ADP5588.pdf
+
+allOf:
+ - $ref: matrix-keymap.yaml#
+ - $ref: input.yaml#
+
+properties:
+ compatible:
+ enum:
+ - adi,adp5587
+ - adi,adp5588
+
+ reg:
+ maxItems: 1
+
+ vcc-supply:
+ description: Supply Voltage Input
+
+ reset-gpios:
+ description:
+ If specified, it will be asserted during driver probe. As the line is
+ active low, it should be marked GPIO_ACTIVE_LOW.
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ gpio-controller:
+ description:
+ This property applies if either keypad,num-rows lower than 8 or
+ keypad,num-columns lower than 10.
+
+ '#gpio-cells':
+ const: 2
+
+ interrupt-controller:
+ description:
+ This property applies if either keypad,num-rows lower than 8 or
+ keypad,num-columns lower than 10.
+
+ '#interrupt-cells':
+ const: 2
+
+ adi,unlock-keys:
+ description:
+ Specifies a maximum of 2 keys that can be used to unlock the keypad.
+ If this property is set, the keyboard will be locked and only unlocked
+ after these keys are pressed. If only one key is set, a double click is
+ needed to unlock the keypad. The value of this property cannot be bigger
+ or equal than keypad,num-rows * keypad,num-columns.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 2
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - keypad,num-rows
+ - keypad,num-columns
+ - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ keys@34 {
+ compatible = "adi,adp5588";
+ reg = <0x34>;
+
+ vcc-supply = <&vcc>;
+ interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio>;
+ reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+
+ keypad,num-rows = <1>;
+ keypad,num-columns = <9>;
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x00, KEY_1)
+ MATRIX_KEY(0x00, 0x01, KEY_2)
+ MATRIX_KEY(0x00, 0x02, KEY_3)
+ MATRIX_KEY(0x00, 0x03, KEY_4)
+ MATRIX_KEY(0x00, 0x04, KEY_5)
+ MATRIX_KEY(0x00, 0x05, KEY_6)
+ MATRIX_KEY(0x00, 0x06, KEY_7)
+ MATRIX_KEY(0x00, 0x07, KEY_8)
+ MATRIX_KEY(0x00, 0x08, KEY_9)
+ >;
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 8404c18e6bcf..aa71df8b699b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -556,6 +556,7 @@ M: Michael Hennerich <michael.hennerich@analog.com>
S: Supported
W: http://wiki.analog.com/ADP5588
W: https://ez.analog.com/linux-software-drivers
+F: Documentation/devicetree/bindings/input/adi,adp5588.yaml
F: drivers/input/keyboard/adp5588-keys.c
ADP8860 BACKLIGHT DRIVER (ADP8860/ADP8861/ADP8863)
--
2.37.2
next prev parent reply other threads:[~2022-08-29 13:18 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-29 13:15 [PATCH v4 00/10] adp5588-keys refactor and fw properties support Nuno Sá
2022-08-29 13:15 ` [PATCH v4 01/10] input: keyboard: adp5588-keys: support gpi key events as 'gpio keys' Nuno Sá
2022-08-29 14:18 ` Andy Shevchenko
2022-08-31 12:37 ` Linus Walleij
2022-08-29 13:15 ` [PATCH v4 02/10] gpio: gpio-adp5588: drop the driver Nuno Sá
2022-08-31 12:21 ` Linus Walleij
2022-08-31 12:22 ` Linus Walleij
2022-08-31 12:24 ` Sa, Nuno
2022-08-29 13:15 ` [PATCH v4 03/10] input: keyboard: adp5588-keys: bail out on returned error Nuno Sá
2022-08-29 13:15 ` [PATCH v4 04/10] input: keyboard: adp5588-keys: add support for fw properties Nuno Sá
2022-08-29 13:15 ` Nuno Sá [this message]
2022-08-29 13:15 ` [PATCH v4 06/10] input: keyboard: adp5588-keys: do not check for irq presence Nuno Sá
2022-08-29 13:15 ` [PATCH v4 07/10] input: keyboard: adp5588-keys: fix coding style warnings Nuno Sá
2022-08-29 13:15 ` [PATCH v4 08/10] input: keyboard: adp5588-keys: add optional reset gpio Nuno Sá
2022-08-29 13:15 ` [PATCH v4 09/10] input: keyboard: adp5588-keys: add regulator support Nuno Sá
2022-08-29 13:15 ` [PATCH v4 10/10] input: keyboard: adp5588-keys: Use new PM macros Nuno Sá
2022-08-31 4:19 ` [PATCH v4 00/10] adp5588-keys refactor and fw properties support Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220829131553.690063-6-nuno.sa@analog.com \
--to=nuno.sa@analog.com \
--cc=andy.shevchenko@gmail.com \
--cc=brgl@bgdev.pl \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michael.hennerich@analog.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).