From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Jianqun Xu <jay.xu@rock-chips.com>,
linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Bartosz Golaszewski <brgl@bgdev.pl>,
Heiko Stuebner <heiko@sntech.de>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v1 1/1] gpio: rockchip: Switch to use fwnode instead of of_node
Date: Tue, 30 Aug 2022 22:19:39 +0300 [thread overview]
Message-ID: <20220830191939.56436-1-andriy.shevchenko@linux.intel.com> (raw)
GPIO library now accepts fwnode as a firmware node, so
switch the driver to use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/gpio/gpio-rockchip.c | 32 ++++++++++++++++--------------
drivers/pinctrl/pinctrl-rockchip.h | 6 ++++--
2 files changed, 21 insertions(+), 17 deletions(-)
diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c
index bb50335239ac..6e847f326ff4 100644
--- a/drivers/gpio/gpio-rockchip.c
+++ b/drivers/gpio/gpio-rockchip.c
@@ -20,6 +20,7 @@
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include "../pinctrl/core.h"
@@ -518,7 +519,7 @@ static int rockchip_interrupts_register(struct rockchip_pin_bank *bank)
struct irq_chip_generic *gc;
int ret;
- bank->domain = irq_domain_add_linear(bank->of_node, 32,
+ bank->domain = irq_domain_create_linear(bank->fwnode, 32,
&irq_generic_chip_ops, NULL);
if (!bank->domain) {
dev_warn(bank->dev, "could not init irq domain for bank %s\n",
@@ -606,14 +607,14 @@ static int rockchip_gpiolib_register(struct rockchip_pin_bank *bank)
* files which don't set the "gpio-ranges" property or systems that
* utilize ACPI the driver has to call gpiochip_add_pin_range().
*/
- if (!of_property_read_bool(bank->of_node, "gpio-ranges")) {
- struct device_node *pctlnp = of_get_parent(bank->of_node);
+ if (!fwnode_property_read_bool(bank->fwnode, "gpio-ranges")) {
+ struct fwnode_handle *parent = fwnode_get_parent(bank->fwnode);
struct pinctrl_dev *pctldev = NULL;
if (!pctlnp)
return -ENODATA;
- pctldev = of_pinctrl_get(pctlnp);
+ pctldev = of_pinctrl_get(to_of_node(parent));
if (!pctldev)
return -ENODEV;
@@ -641,10 +642,11 @@ static int rockchip_gpiolib_register(struct rockchip_pin_bank *bank)
static int rockchip_get_bank_data(struct rockchip_pin_bank *bank)
{
+ struct device_node *node = to_of_node(bank->fwnode);
struct resource res;
int id = 0;
- if (of_address_to_resource(bank->of_node, 0, &res)) {
+ if (of_address_to_resource(node, 0, &res)) {
dev_err(bank->dev, "cannot find IO resource for bank\n");
return -ENOENT;
}
@@ -653,11 +655,11 @@ static int rockchip_get_bank_data(struct rockchip_pin_bank *bank)
if (IS_ERR(bank->reg_base))
return PTR_ERR(bank->reg_base);
- bank->irq = irq_of_parse_and_map(bank->of_node, 0);
+ bank->irq = irq_of_parse_and_map(node, 0);
if (!bank->irq)
return -EINVAL;
- bank->clk = of_clk_get(bank->of_node, 0);
+ bank->clk = of_clk_get(node, 0);
if (IS_ERR(bank->clk))
return PTR_ERR(bank->clk);
@@ -668,7 +670,7 @@ static int rockchip_get_bank_data(struct rockchip_pin_bank *bank)
if (id == GPIO_TYPE_V2 || id == GPIO_TYPE_V2_1) {
bank->gpio_regs = &gpio_regs_v2;
bank->gpio_type = GPIO_TYPE_V2;
- bank->db_clk = of_clk_get(bank->of_node, 1);
+ bank->db_clk = of_clk_get(node, 1);
if (IS_ERR(bank->db_clk)) {
dev_err(bank->dev, "cannot find debounce clk\n");
clk_disable_unprepare(bank->clk);
@@ -704,22 +706,22 @@ rockchip_gpio_find_bank(struct pinctrl_dev *pctldev, int id)
static int rockchip_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct device_node *np = dev->of_node;
- struct device_node *pctlnp = of_get_parent(np);
+ struct fwnode_handle *fwnode = dev_fwnode(dev);
+ struct fwnode_handle *parent = fwnode_get_parent(fwnode);
struct pinctrl_dev *pctldev = NULL;
struct rockchip_pin_bank *bank = NULL;
struct rockchip_pin_deferred *cfg;
static int gpio;
int id, ret;
- if (!np || !pctlnp)
+ if (!parent)
return -ENODEV;
- pctldev = of_pinctrl_get(pctlnp);
+ pctldev = of_pinctrl_get(to_of_node(parent));
if (!pctldev)
return -EPROBE_DEFER;
- id = of_alias_get_id(np, "gpio");
+ id = of_alias_get_id(to_of_node(fwnode), "gpio");
if (id < 0)
id = gpio++;
@@ -728,7 +730,7 @@ static int rockchip_gpio_probe(struct platform_device *pdev)
return -EINVAL;
bank->dev = dev;
- bank->of_node = np;
+ bank->fwnode = fwnode;
raw_spin_lock_init(&bank->slock);
@@ -776,7 +778,7 @@ static int rockchip_gpio_probe(struct platform_device *pdev)
mutex_unlock(&bank->deferred_lock);
platform_set_drvdata(pdev, bank);
- dev_info(dev, "probed %pOF\n", np);
+ dev_info(dev, "probed %pfw\n", fwnode);
return 0;
}
diff --git a/drivers/pinctrl/pinctrl-rockchip.h b/drivers/pinctrl/pinctrl-rockchip.h
index 4759f336941e..411ed6a09842 100644
--- a/drivers/pinctrl/pinctrl-rockchip.h
+++ b/drivers/pinctrl/pinctrl-rockchip.h
@@ -18,6 +18,8 @@
#ifndef _PINCTRL_ROCKCHIP_H
#define _PINCTRL_ROCKCHIP_H
+struct fwnode_handle;
+
#define RK_GPIO0_A0 0
#define RK_GPIO0_A1 1
#define RK_GPIO0_A2 2
@@ -299,7 +301,7 @@ struct rockchip_drv {
* @drv: array describing the 4 drive strength sources of the bank
* @pull_type: array describing the 4 pull type sources of the bank
* @valid: is all necessary information present
- * @of_node: dt node of this bank
+ * @fwnode: firmware node of this bank
* @drvdata: common pinctrl basedata
* @domain: irqdomain of the gpio bank
* @gpio_chip: gpiolib chip
@@ -327,7 +329,7 @@ struct rockchip_pin_bank {
struct rockchip_drv drv[4];
enum rockchip_pin_pull_type pull_type[4];
bool valid;
- struct device_node *of_node;
+ struct fwnode_handle *fwnode;
struct rockchip_pinctrl *drvdata;
struct irq_domain *domain;
struct gpio_chip gpio_chip;
--
2.35.1
next reply other threads:[~2022-08-30 19:19 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-30 19:19 Andy Shevchenko [this message]
2022-08-30 22:39 ` [PATCH v1 1/1] gpio: rockchip: Switch to use fwnode instead of of_node kernel test robot
2022-08-30 22:50 ` kernel test robot
2022-08-31 12:14 ` Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220830191939.56436-1-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=brgl@bgdev.pl \
--cc=heiko@sntech.de \
--cc=jay.xu@rock-chips.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).