From: Frank Wunderlich <linux@fw-web.de>
To: linux-mediatek@lists.infradead.org
Cc: Sam Shih <sam.shih@mediatek.com>,
Sean Wang <sean.wang@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Frank Wunderlich <frank-w@public-files.de>
Subject: [PATCH] pinctrl: mediatek: allow configuring uart rx/tx and rts/cts separately
Date: Sat, 8 Oct 2022 18:48:06 +0200 [thread overview]
Message-ID: <20221008164807.113590-1-linux@fw-web.de> (raw)
From: Sam Shih <sam.shih@mediatek.com>
Some mt7986 boards use uart rts/cts pins as gpio,
This patch allows to change rts/cts to gpio mode, but keep
rx/tx as UART function.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
drivers/pinctrl/mediatek/pinctrl-mt7986.c | 32 ++++++++++++++++++-----
1 file changed, 25 insertions(+), 7 deletions(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7986.c b/drivers/pinctrl/mediatek/pinctrl-mt7986.c
index f26869f1a367..95f32e62e02f 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt7986.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt7986.c
@@ -675,11 +675,17 @@ static int mt7986_uart1_1_funcs[] = { 4, 4, 4, 4, };
static int mt7986_spi1_2_pins[] = { 29, 30, 31, 32, };
static int mt7986_spi1_2_funcs[] = { 1, 1, 1, 1, };
-static int mt7986_uart1_2_pins[] = { 29, 30, 31, 32, };
-static int mt7986_uart1_2_funcs[] = { 3, 3, 3, 3, };
+static int mt7986_uart1_2_rx_tx_pins[] = { 29, 30, };
+static int mt7986_uart1_2_rx_tx_funcs[] = { 3, 3, };
-static int mt7986_uart2_0_pins[] = { 29, 30, 31, 32, };
-static int mt7986_uart2_0_funcs[] = { 4, 4, 4, 4, };
+static int mt7986_uart1_2_cts_rts_pins[] = { 31, 32, };
+static int mt7986_uart1_2_cts_rts_funcs[] = { 3, 3, };
+
+static int mt7986_uart2_0_rx_tx_pins[] = { 29, 30, };
+static int mt7986_uart2_0_rx_tx_funcs[] = { 4, 4, };
+
+static int mt7986_uart2_0_cts_rts_pins[] = { 31, 32, };
+static int mt7986_uart2_0_cts_rts_funcs[] = { 4, 4, };
static int mt7986_spi0_pins[] = { 33, 34, 35, 36, };
static int mt7986_spi0_funcs[] = { 1, 1, 1, 1, };
@@ -708,6 +714,12 @@ static int mt7986_pcie_reset_funcs[] = { 1, };
static int mt7986_uart1_pins[] = { 42, 43, 44, 45, };
static int mt7986_uart1_funcs[] = { 1, 1, 1, 1, };
+static int mt7986_uart1_rx_tx_pins[] = { 42, 43, };
+static int mt7986_uart1_rx_tx_funcs[] = { 1, 1, };
+
+static int mt7986_uart1_cts_rts_pins[] = { 44, 45, };
+static int mt7986_uart1_cts_rts_funcs[] = { 1, 1, };
+
static int mt7986_uart2_pins[] = { 46, 47, 48, 49, };
static int mt7986_uart2_funcs[] = { 1, 1, 1, 1, };
@@ -749,6 +761,8 @@ static const struct group_desc mt7986_groups[] = {
PINCTRL_PIN_GROUP("wifi_led", mt7986_wifi_led),
PINCTRL_PIN_GROUP("i2c", mt7986_i2c),
PINCTRL_PIN_GROUP("uart1_0", mt7986_uart1_0),
+ PINCTRL_PIN_GROUP("uart1_rx_tx", mt7986_uart1_rx_tx),
+ PINCTRL_PIN_GROUP("uart1_cts_rts", mt7986_uart1_cts_rts),
PINCTRL_PIN_GROUP("pcie_clk", mt7986_pcie_clk),
PINCTRL_PIN_GROUP("pcie_wake", mt7986_pcie_wake),
PINCTRL_PIN_GROUP("spi1_0", mt7986_spi1_0),
@@ -760,8 +774,10 @@ static const struct group_desc mt7986_groups[] = {
PINCTRL_PIN_GROUP("spi1_1", mt7986_spi1_1),
PINCTRL_PIN_GROUP("uart1_1", mt7986_uart1_1),
PINCTRL_PIN_GROUP("spi1_2", mt7986_spi1_2),
- PINCTRL_PIN_GROUP("uart1_2", mt7986_uart1_2),
- PINCTRL_PIN_GROUP("uart2_0", mt7986_uart2_0),
+ PINCTRL_PIN_GROUP("uart1_2_rx_tx", mt7986_uart1_2_rx_tx),
+ PINCTRL_PIN_GROUP("uart1_2_cts_rts", mt7986_uart1_2_cts_rts),
+ PINCTRL_PIN_GROUP("uart2_0_rx_tx", mt7986_uart2_0_rx_tx),
+ PINCTRL_PIN_GROUP("uart2_0_cts_rts", mt7986_uart2_0_cts_rts),
PINCTRL_PIN_GROUP("spi0", mt7986_spi0),
PINCTRL_PIN_GROUP("spi0_wp_hold", mt7986_spi0_wp_hold),
PINCTRL_PIN_GROUP("uart2_1", mt7986_uart2_1),
@@ -800,7 +816,9 @@ static const char *mt7986_pwm_groups[] = { "pwm0", "pwm1_0", "pwm1_1", };
static const char *mt7986_spi_groups[] = {
"spi0", "spi0_wp_hold", "spi1_0", "spi1_1", "spi1_2", "spi1_3", };
static const char *mt7986_uart_groups[] = {
- "uart1_0", "uart1_1", "uart1_2", "uart1_3_rx_tx", "uart1_3_cts_rts",
+ "uart1_0", "uart1_1", "uart1_rx_tx", "uart1_cts_rts",
+ "uart1_2_rx_tx", "uart1_2_cts_rts",
+ "uart1_3_rx_tx", "uart1_3_cts_rts", "uart2_0_rx_tx", "uart2_0_cts_rts",
"uart2_0", "uart2_1", "uart0", "uart1", "uart2",
};
static const char *mt7986_wdt_groups[] = { "watchdog", };
--
2.34.1
next reply other threads:[~2022-10-08 16:55 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-08 16:48 Frank Wunderlich [this message]
2022-10-17 9:41 ` [PATCH] pinctrl: mediatek: allow configuring uart rx/tx and rts/cts separately Linus Walleij
2022-10-17 9:49 ` Chen-Yu Tsai
2022-10-17 9:56 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221008164807.113590-1-linux@fw-web.de \
--to=linux@fw-web.de \
--cc=frank-w@public-files.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=sam.shih@mediatek.com \
--cc=sean.wang@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).