From: Keguang Zhang <keguang.zhang@gmail.com>
To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <brgl@bgdev.pl>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Keguang Zhang <keguang.zhang@gmail.com>
Subject: [PATCH v2 3/5] gpio: loongson1: Introduce ls1x_gpio_chip struct
Date: Thu, 2 Mar 2023 20:52:13 +0800 [thread overview]
Message-ID: <20230302125215.214014-4-keguang.zhang@gmail.com> (raw)
In-Reply-To: <20230302125215.214014-1-keguang.zhang@gmail.com>
This patch introduces and allocates ls1x_gpio_chip struct containing
gpio_chip and reg_base to avoid global gpio_reg_base.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
---
V1 -> V2: Split this change to a separate patch
---
drivers/gpio/gpio-loongson1.c | 45 +++++++++++++++++++----------------
1 file changed, 25 insertions(+), 20 deletions(-)
diff --git a/drivers/gpio/gpio-loongson1.c b/drivers/gpio/gpio-loongson1.c
index b6c11caa3ade..3ac9e49e7efb 100644
--- a/drivers/gpio/gpio-loongson1.c
+++ b/drivers/gpio/gpio-loongson1.c
@@ -16,15 +16,19 @@
#define GPIO_DATA 0x20
#define GPIO_OUTPUT 0x30
-static void __iomem *gpio_reg_base;
+struct ls1x_gpio_chip {
+ struct gpio_chip gc;
+ void __iomem *reg_base;
+};
static int ls1x_gpio_request(struct gpio_chip *gc, unsigned int offset)
{
+ struct ls1x_gpio_chip *ls1x_gc = gpiochip_get_data(gc);
unsigned long flags;
raw_spin_lock_irqsave(&gc->bgpio_lock, flags);
- writel(readl(gpio_reg_base + GPIO_CFG) | BIT(offset),
- gpio_reg_base + GPIO_CFG);
+ writel(readl(ls1x_gc->reg_base + GPIO_CFG) | BIT(offset),
+ ls1x_gc->reg_base + GPIO_CFG);
raw_spin_unlock_irqrestore(&gc->bgpio_lock, flags);
return 0;
@@ -32,44 +36,45 @@ static int ls1x_gpio_request(struct gpio_chip *gc, unsigned int offset)
static void ls1x_gpio_free(struct gpio_chip *gc, unsigned int offset)
{
+ struct ls1x_gpio_chip *ls1x_gc = gpiochip_get_data(gc);
unsigned long flags;
raw_spin_lock_irqsave(&gc->bgpio_lock, flags);
- writel(readl(gpio_reg_base + GPIO_CFG) & ~BIT(offset),
- gpio_reg_base + GPIO_CFG);
+ writel(readl(ls1x_gc->reg_base + GPIO_CFG) & ~BIT(offset),
+ ls1x_gc->reg_base + GPIO_CFG);
raw_spin_unlock_irqrestore(&gc->bgpio_lock, flags);
}
static int ls1x_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct gpio_chip *gc;
+ struct ls1x_gpio_chip *ls1x_gc;
int ret;
- gc = devm_kzalloc(dev, sizeof(*gc), GFP_KERNEL);
- if (!gc)
+ ls1x_gc = devm_kzalloc(dev, sizeof(*ls1x_gc), GFP_KERNEL);
+ if (!ls1x_gc)
return -ENOMEM;
- gpio_reg_base = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(gpio_reg_base))
- return PTR_ERR(gpio_reg_base);
+ ls1x_gc->reg_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(ls1x_gc->reg_base))
+ return PTR_ERR(ls1x_gc->reg_base);
- ret = bgpio_init(gc, dev, 4, gpio_reg_base + GPIO_DATA,
- gpio_reg_base + GPIO_OUTPUT, NULL,
- NULL, gpio_reg_base + GPIO_DIR, 0);
+ ret = bgpio_init(&ls1x_gc->gc, dev, 4, ls1x_gc->reg_base + GPIO_DATA,
+ ls1x_gc->reg_base + GPIO_OUTPUT, NULL,
+ NULL, ls1x_gc->reg_base + GPIO_DIR, 0);
if (ret)
goto err;
- gc->owner = THIS_MODULE;
- gc->request = ls1x_gpio_request;
- gc->free = ls1x_gpio_free;
- gc->base = pdev->id * 32;
+ ls1x_gc->gc.owner = THIS_MODULE;
+ ls1x_gc->gc.request = ls1x_gpio_request;
+ ls1x_gc->gc.free = ls1x_gpio_free;
+ ls1x_gc->gc.base = pdev->id * 32;
- ret = devm_gpiochip_add_data(dev, gc, NULL);
+ ret = devm_gpiochip_add_data(dev, &ls1x_gc->gc, ls1x_gc);
if (ret)
goto err;
- platform_set_drvdata(pdev, gc);
+ platform_set_drvdata(pdev, ls1x_gc);
dev_info(dev, "Loongson1 GPIO driver registered\n");
return 0;
--
2.34.1
next prev parent reply other threads:[~2023-03-02 12:53 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-02 12:52 [PATCH v2 0/5] Devicetree support for Loongson-1 GPIO Keguang Zhang
2023-03-02 12:52 ` [PATCH v2 1/5] gpio: loongson1: Convert to SPDX identifier Keguang Zhang
2023-03-06 9:29 ` Bartosz Golaszewski
2023-03-07 2:25 ` Keguang Zhang
2023-03-07 13:31 ` Linus Walleij
2023-03-08 2:46 ` Keguang Zhang
2023-03-07 16:48 ` Bartosz Golaszewski
2023-03-08 2:53 ` Keguang Zhang
2023-03-02 12:52 ` [PATCH v2 2/5] gpio: loongson1: Use readl() & writel() Keguang Zhang
2023-03-06 9:30 ` Bartosz Golaszewski
2023-03-07 3:45 ` Keguang Zhang
2023-03-08 9:42 ` David Laight
2023-03-08 11:35 ` Keguang Zhang
2023-03-02 12:52 ` Keguang Zhang [this message]
2023-03-02 12:52 ` [PATCH v2 4/5] gpio: loongson1: Add DT support Keguang Zhang
2023-03-06 9:39 ` Bartosz Golaszewski
2023-03-07 3:41 ` Keguang Zhang
2023-03-02 12:52 ` [PATCH v2 5/5] dt-bindings: gpio: Add Loongson-1 GPIO Keguang Zhang
2023-03-02 12:58 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230302125215.214014-4-keguang.zhang@gmail.com \
--to=keguang.zhang@gmail.com \
--cc=brgl@bgdev.pl \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).