[PATCH v1 10/16] gpio: mvebu: Utilize helpers from string_choices.h

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

There are a few helpers available to convert a boolean variable
to the dedicated string literals depending on the application.
Use them in the driver.

While at, utilize specifier field for padding the strings where
it's required.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/gpio/gpio-mvebu.c | 27 ++++++++++++---------------
 1 file changed, 12 insertions(+), 15 deletions(-)

diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index a68f682aec01..f2bbe928577c 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -48,6 +48,7 @@
 #include <linux/pwm.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
+#include <linux/string_choices.h>
 
 /*
  * GPIO unit register offsets.
@@ -897,32 +898,28 @@ static void mvebu_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 	lvl_msk	= mvebu_gpio_read_level_mask(mvchip);
 
 	for_each_requested_gpio(chip, i, label) {
-		u32 msk;
-		bool is_out;
+		u32 msk = BIT(i);
 
-		msk = BIT(i);
-		is_out = !(io_conf & msk);
+		seq_printf(s, " gpio-%-3d (%-20.20s) %-3.3s ", chip->base + i, label,
+			   str_in_out(io_conf & msk));
 
-		seq_printf(s, " gpio-%-3d (%-20.20s)", chip->base + i, label);
-
-		if (is_out) {
-			seq_printf(s, " out %s %s\n",
-				   out & msk ? "hi" : "lo",
+		if (!(io_conf & msk)) {
+			seq_printf(s, "%-2.2s %s\n", str_hi_lo(out & msk),
 				   blink & msk ? "(blink )" : "");
 			continue;
 		}
 
-		seq_printf(s, " in  %s (act %s) - IRQ",
-			   (data_in ^ in_pol) & msk  ? "hi" : "lo",
-			   in_pol & msk ? "lo" : "hi");
+		seq_printf(s, "%-2.2s (act %-2.2s) - IRQ ",
+			   str_hi_lo((data_in ^ in_pol) & msk),
+			   str_lo_hi(in_pol & msk));
 		if (!((edg_msk | lvl_msk) & msk)) {
-			seq_puts(s, " disabled\n");
+			seq_puts(s, "disabled\n");
 			continue;
 		}
 		if (edg_msk & msk)
-			seq_puts(s, " edge ");
+			seq_puts(s, "edge ");
 		if (lvl_msk & msk)
-			seq_puts(s, " level");
+			seq_puts(s, "level");
 		seq_printf(s, " (%s)\n", cause & msk ? "pending" : "clear  ");
 	}
 }
-- 
2.39.1