From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>,
Mark Brown <broonie@kernel.org>
Subject: [PATCH v3 17/18] regulator: qcom-rpmh: add support for pmm8654au regulators
Date: Mon, 27 Mar 2023 14:53:15 +0200 [thread overview]
Message-ID: <20230327125316.210812-18-brgl@bgdev.pl> (raw)
In-Reply-To: <20230327125316.210812-1-brgl@bgdev.pl>
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add the RPMH regulators exposed by the PMM8654au PMIC and its variants.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
---
drivers/regulator/qcom-rpmh-regulator.c | 55 +++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 4826d60e5d95..b0a58c62b1e2 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -694,6 +694,16 @@ static const struct rpmh_vreg_hw_data pmic5_pldo_lv = {
.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
};
+static const struct rpmh_vreg_hw_data pmic5_pldo515_mv = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_drms_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(1800000, 0, 187, 8000),
+ .n_voltages = 188,
+ .hpm_min_load_uA = 10000,
+ .pmic_mode_map = pmic_mode_map_pmic5_ldo,
+ .of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
static const struct rpmh_vreg_hw_data pmic5_nldo = {
.regulator_type = VRM,
.ops = &rpmh_regulator_vrm_drms_ops,
@@ -704,6 +714,16 @@ static const struct rpmh_vreg_hw_data pmic5_nldo = {
.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
};
+static const struct rpmh_vreg_hw_data pmic5_nldo515 = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_drms_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 210, 8000),
+ .n_voltages = 211,
+ .hpm_min_load_uA = 30000,
+ .pmic_mode_map = pmic_mode_map_pmic5_ldo,
+ .of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
static const struct rpmh_vreg_hw_data pmic5_hfsmps510 = {
.regulator_type = VRM,
.ops = &rpmh_regulator_vrm_ops,
@@ -749,6 +769,15 @@ static const struct rpmh_vreg_hw_data pmic5_ftsmps525_mv = {
.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
};
+static const struct rpmh_vreg_hw_data pmic5_ftsmps527 = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000),
+ .n_voltages = 215,
+ .pmic_mode_map = pmic_mode_map_pmic5_smps,
+ .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = {
.regulator_type = VRM,
.ops = &rpmh_regulator_vrm_ops,
@@ -937,6 +966,28 @@ static const struct rpmh_vreg_init_data pmm8155au_vreg_data[] = {
{}
};
+static const struct rpmh_vreg_init_data pmm8654au_vreg_data[] = {
+ RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps527, "vdd-s1"),
+ RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps527, "vdd-s2"),
+ RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps527, "vdd-s3"),
+ RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps527, "vdd-s4"),
+ RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps527, "vdd-s5"),
+ RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps527, "vdd-s6"),
+ RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps527, "vdd-s7"),
+ RPMH_VREG("smps8", "smp%s8", &pmic5_ftsmps527, "vdd-s8"),
+ RPMH_VREG("smps9", "smp%s9", &pmic5_ftsmps527, "vdd-s9"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo515, "vdd-s9"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo515, "vdd-l2-l3"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo515, "vdd-l2-l3"),
+ RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo515, "vdd-s9"),
+ RPMH_VREG("ldo5", "ldo%s5", &pmic5_nldo515, "vdd-s9"),
+ RPMH_VREG("ldo6", "ldo%s6", &pmic5_nldo515, "vdd-l6-l7"),
+ RPMH_VREG("ldo7", "ldo%s7", &pmic5_nldo515, "vdd-l6-l7"),
+ RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo515_mv, "vdd-l8-l9"),
+ RPMH_VREG("ldo9", "ldo%s9", &pmic5_pldo, "vdd-l8-l9"),
+ {}
+};
+
static const struct rpmh_vreg_init_data pm8350_vreg_data[] = {
RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"),
RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"),
@@ -1431,6 +1482,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
.compatible = "qcom,pmm8155au-rpmh-regulators",
.data = pmm8155au_vreg_data,
},
+ {
+ .compatible = "qcom,pmm8654au-rpmh-regulators",
+ .data = pmm8654au_vreg_data,
+ },
{
.compatible = "qcom,pmx55-rpmh-regulators",
.data = pmx55_vreg_data,
--
2.37.2
next prev parent reply other threads:[~2023-03-27 12:54 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-27 12:52 [PATCH v3 00/18] arm64: dts: qcom: sa8775p: add basic PMIC support Bartosz Golaszewski
2023-03-27 12:52 ` [PATCH v3 01/18] arm64: dts: qcom: sa8775p: pad reg properties to 8 digits Bartosz Golaszewski
2023-03-27 12:53 ` [PATCH v3 02/18] arm64: dts: qcom: sa8775p: sort soc nodes by reg property Bartosz Golaszewski
2023-03-27 12:53 ` [PATCH v3 03/18] dt-bindings: interrupt-controller: qcom-pdc: add compatible for sa8775p Bartosz Golaszewski
2023-03-27 14:48 ` Krzysztof Kozlowski
2023-04-06 14:10 ` Bartosz Golaszewski
2023-04-14 9:33 ` Bartosz Golaszewski
2023-04-16 15:04 ` Krzysztof Kozlowski
2023-04-17 7:27 ` Bartosz Golaszewski
2023-04-17 7:55 ` Krzysztof Kozlowski
2023-04-17 8:35 ` Krzysztof Kozlowski
2023-03-27 12:53 ` [PATCH v3 04/18] arm64: dts: qcom: sa8775p: add the pdc node Bartosz Golaszewski
2023-03-28 9:05 ` Konrad Dybcio
2023-03-27 12:53 ` [PATCH v3 05/18] arm64: dts: qcom: sa8775p: add the spmi node Bartosz Golaszewski
2023-03-27 12:53 ` [PATCH v3 06/18] dt-bindings: mfd: qcom,spmi-pmic: add compatible for pmm8654au Bartosz Golaszewski
2023-03-30 13:13 ` Lee Jones
2023-03-30 13:17 ` Bartosz Golaszewski
2023-03-30 14:00 ` Lee Jones
2023-03-27 12:53 ` [PATCH v3 07/18] arm64: dts: qcom: sa8775p: add support for the on-board PMICs Bartosz Golaszewski
2023-03-27 12:53 ` [PATCH v3 08/18] arm64: dts: qcom: sa8775p: add the Power On device node Bartosz Golaszewski
2023-03-27 12:53 ` [PATCH v3 09/18] arm64: dts: qcom: sa8775p: pmic: add the power key Bartosz Golaszewski
2023-03-27 12:53 ` [PATCH v3 10/18] arm64: dts: qcom: sa8775p: pmic: add support for the pmm8654 RESIN input Bartosz Golaszewski
2023-03-27 12:53 ` [PATCH v3 11/18] arm64: dts: qcom: sa8775p: pmic: add thermal zones Bartosz Golaszewski
2023-03-28 9:05 ` Konrad Dybcio
2023-03-27 12:53 ` [PATCH v3 12/18] dt-bindings: pinctrl: qcom,pmic-gpio: add compatible for pmm8654au-gpio Bartosz Golaszewski
2023-03-28 13:24 ` Linus Walleij
2023-04-06 14:08 ` Bartosz Golaszewski
2023-04-10 22:09 ` Linus Walleij
2023-03-27 12:53 ` [PATCH v3 13/18] pinctrl: qcom: spmi-gpio: add support " Bartosz Golaszewski
2023-03-28 13:24 ` Linus Walleij
2023-03-27 12:53 ` [PATCH v3 14/18] arm64: dts: qcom: sa8775p: add PMIC GPIO controller nodes Bartosz Golaszewski
2023-03-28 9:06 ` Konrad Dybcio
2023-03-27 12:53 ` [PATCH v3 15/18] arm64: dts: qcom: sa8775p-ride: set gpio-line-names for PMIC GPIOs Bartosz Golaszewski
2023-03-28 9:16 ` Konrad Dybcio
2023-03-27 12:53 ` [PATCH v3 16/18] dt-bindings: regulator: qcom,rpmh: add compatible for pmm8654au RPMH Bartosz Golaszewski
2023-03-27 14:49 ` Krzysztof Kozlowski
2023-03-27 12:53 ` Bartosz Golaszewski [this message]
2023-03-28 9:29 ` [PATCH v3 17/18] regulator: qcom-rpmh: add support for pmm8654au regulators Konrad Dybcio
2023-03-27 12:53 ` [PATCH v3 18/18] arm64: dts: qcom: sa8775p-ride: add PMIC regulators Bartosz Golaszewski
2023-03-29 7:50 ` Shazad Hussain
2023-04-05 4:08 ` (subset) [PATCH v3 00/18] arm64: dts: qcom: sa8775p: add basic PMIC support Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230327125316.210812-18-brgl@bgdev.pl \
--to=brgl@bgdev.pl \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=bartosz.golaszewski@linaro.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).