linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Linus Walleij <linus.walleij@linaro.org>
To: Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	Broadcom internal kernel review list 
	<bcm-kernel-feedback-list@broadcom.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Gregory Clement <gregory.clement@bootlin.com>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Avi Fishman <avifishman70@gmail.com>,
	Tomer Maimon <tmaimon77@gmail.com>,
	Tali Perry <tali.perry1@gmail.com>,
	Patrick Venture <venture@google.com>,
	Nancy Yuen <yuenn@google.com>,
	Benjamin Fair <benjaminfair@google.com>,
	Patrice Chotard <patrice.chotard@foss.st.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, openbmc@lists.ozlabs.org,
	linux-stm32@st-md-mailman.stormreply.com,
	Linus Walleij <linus.walleij@linaro.org>,
	Marc Zyngier <maz@kernel.org>
Subject: [PATCH 7/9] pinctrl: st: Convert to immutable irq_chip
Date: Tue, 04 Apr 2023 11:43:09 +0200	[thread overview]
Message-ID: <20230403-immutable-irqchips-v1-7-503788a7f6e6@linaro.org> (raw)
In-Reply-To: <20230403-immutable-irqchips-v1-0-503788a7f6e6@linaro.org>

Convert the driver to immutable irq-chip with a bit of
intuition.

I switched to using irqd_to_hwirq() consistently while we
are at it.

This driver does not use the GPIOCHIP_IRQ_RESOURCE_HELPERS
as it defines its own resource reservations, simply in
order to turn IRQ lines into inputs on initialization.

Also switched the open coded calls to gpiochip_lock_as_irq()
to gpiochip_reqres_irq() so we also get the right module
reference counting.

Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/pinctrl/pinctrl-st.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c
index 1409339f0279..c1f36b164ea5 100644
--- a/drivers/pinctrl/pinctrl-st.c
+++ b/drivers/pinctrl/pinctrl-st.c
@@ -1313,7 +1313,8 @@ static void st_gpio_irq_mask(struct irq_data *d)
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 	struct st_gpio_bank *bank = gpiochip_get_data(gc);
 
-	writel(BIT(d->hwirq), bank->base + REG_PIO_CLR_PMASK);
+	writel(BIT(irqd_to_hwirq(d)), bank->base + REG_PIO_CLR_PMASK);
+	gpiochip_disable_irq(gc, irqd_to_hwirq(d));
 }
 
 static void st_gpio_irq_unmask(struct irq_data *d)
@@ -1321,7 +1322,8 @@ static void st_gpio_irq_unmask(struct irq_data *d)
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 	struct st_gpio_bank *bank = gpiochip_get_data(gc);
 
-	writel(BIT(d->hwirq), bank->base + REG_PIO_SET_PMASK);
+	gpiochip_enable_irq(gc, irqd_to_hwirq(d));
+	writel(BIT(irqd_to_hwirq(d)), bank->base + REG_PIO_SET_PMASK);
 }
 
 static int st_gpio_irq_request_resources(struct irq_data *d)
@@ -1330,14 +1332,14 @@ static int st_gpio_irq_request_resources(struct irq_data *d)
 
 	st_gpio_direction_input(gc, d->hwirq);
 
-	return gpiochip_lock_as_irq(gc, d->hwirq);
+	return gpiochip_reqres_irq(gc, d->hwirq);
 }
 
 static void st_gpio_irq_release_resources(struct irq_data *d)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 
-	gpiochip_unlock_as_irq(gc, d->hwirq);
+	gpiochip_relres_irq(gc, d->hwirq);
 }
 
 static int st_gpio_irq_set_type(struct irq_data *d, unsigned type)
@@ -1492,7 +1494,7 @@ static const struct gpio_chip st_gpio_template = {
 	.ngpio			= ST_GPIO_PINS_PER_BANK,
 };
 
-static struct irq_chip st_gpio_irqchip = {
+static const struct irq_chip st_gpio_irqchip = {
 	.name			= "GPIO",
 	.irq_request_resources	= st_gpio_irq_request_resources,
 	.irq_release_resources	= st_gpio_irq_release_resources,
@@ -1500,7 +1502,7 @@ static struct irq_chip st_gpio_irqchip = {
 	.irq_mask		= st_gpio_irq_mask,
 	.irq_unmask		= st_gpio_irq_unmask,
 	.irq_set_type		= st_gpio_irq_set_type,
-	.flags			= IRQCHIP_SKIP_SET_WAKE,
+	.flags			= IRQCHIP_SKIP_SET_WAKE | IRQCHIP_IMMUTABLE,
 };
 
 static int st_gpiolib_register_bank(struct st_pinctrl *info,
@@ -1570,7 +1572,7 @@ static int st_gpiolib_register_bank(struct st_pinctrl *info,
 		}
 
 		girq = &bank->gpio_chip.irq;
-		girq->chip = &st_gpio_irqchip;
+		gpio_irq_chip_set_chip(girq, &st_gpio_irqchip);
 		girq->parent_handler = st_gpio_irq_handler;
 		girq->num_parents = 1;
 		girq->parents = devm_kcalloc(dev, 1, sizeof(*girq->parents),

-- 
2.34.1


  parent reply	other threads:[~2023-04-04  9:43 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-04  9:43 [PATCH 0/9] Convert low hanging pinctrl irqchips to be immutable Linus Walleij
2023-04-04  9:43 ` [PATCH 1/9] pinctrl: iproc: Convert to immutable irq_chip Linus Walleij
2023-04-04  9:43 ` [PATCH 2/9] pinctrl: nsp: " Linus Walleij
2023-04-04  9:43 ` [PATCH 3/9] pinctrl: armada-37xx: " Linus Walleij
2023-04-04  9:43 ` [PATCH 4/9] pinctrl: npcm7xx: " Linus Walleij
2023-04-04  9:43 ` [PATCH 5/9] pinctrl: equilibrium: " Linus Walleij
2023-04-04  9:43 ` [PATCH 6/9] pinctrl: mcp23s08: " Linus Walleij
2023-04-04  9:43 ` Linus Walleij [this message]
2023-04-04  9:43 ` [PATCH 8/9] pinctrl: stmfx: " Linus Walleij
2023-04-04  9:43 ` [PATCH 9/9] pinctrl: sx150x: " Linus Walleij
2023-04-14  9:09 ` [PATCH 0/9] Convert low hanging pinctrl irqchips to be immutable Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230403-immutable-irqchips-v1-7-503788a7f6e6@linaro.org \
    --to=linus.walleij@linaro.org \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew@lunn.ch \
    --cc=avifishman70@gmail.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=benjaminfair@google.com \
    --cc=gregory.clement@bootlin.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=maz@kernel.org \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=openbmc@lists.ozlabs.org \
    --cc=patrice.chotard@foss.st.com \
    --cc=rjui@broadcom.com \
    --cc=sbranden@broadcom.com \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=tali.perry1@gmail.com \
    --cc=tmaimon77@gmail.com \
    --cc=venture@google.com \
    --cc=yuenn@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).