linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexandre Torgue <alexandre.torgue@foss.st.com>
To: <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
	Olof Johansson <olof@lixom.net>, <soc@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-kernel@vger.kernel.org>, <linux-gpio@vger.kernel.org>
Subject: [PATCH 06/11] arm64: dts: st: introduce stm32mp25 SoCs family
Date: Mon, 29 May 2023 18:20:29 +0200	[thread overview]
Message-ID: <20230529162034.20481-7-alexandre.torgue@foss.st.com> (raw)
In-Reply-To: <20230529162034.20481-1-alexandre.torgue@foss.st.com>

STM32MP25 family is composed of 4 SoCs defined as following:

-STM32MP251: common part composed of 1*Cortex-A35, common peripherals like
SDMMC, UART, SPI, I2C, PCIe, USB3, parallel and DSI display, 1*ETH ...

-STM32MP253: STM32MP251 + 1*Cortex-A35 (dual CPU), a second ETH, CAN-FD and
LVDS display.

-STM32MP255: STM32MP253 + GPU/AI and video encode/decode.
-STM32MP257: STM32MP255 + ETH TSN switch (2+1 ports).

A second diversity layer exists for security features/ A35 frequency:
-STM32MP25xY, "Y" gives information:
 -Y = A means A35@1.2GHz + no cryp IP and no secure boot.
 -Y = C means A35@1.2GHz + cryp IP and secure boot.
 -Y = D means A35@1.5GHz + no cryp IP and no secure boot.
 -Y = F means A35@1.5GHz + cryp IP and secure boot.

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
new file mode 100644
index 000000000000..5268a4321841
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a35";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a35-pmu";
+		interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+		interrupt-parent = <&intc>;
+	};
+
+	clocks {
+		ck_flexgen_08: ck-flexgen-08 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <100000000>;
+		};
+
+		ck_flexgen_51: ck-flexgen-51 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+		};
+
+		ck_icn_ls_mcu: ck-icn-ls-mcu {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		scmi {
+			compatible = "linaro,scmi-optee";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linaro,optee-channel-id = <0>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_reset: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
+		};
+	};
+
+	intc: interrupt-controller@4ac00000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0x0 0x4ac10000 0x0 0x1000>,
+		      <0x0 0x4ac20000 0x0 0x2000>,
+		      <0x0 0x4ac40000 0x0 0x2000>,
+		      <0x0 0x4ac60000 0x0 0x2000>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		always-on;
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges = <0x0 0x0 0x0 0x80000000>;
+
+		rifsc: rifsc-bus@42080000 {
+			compatible = "simple-bus";
+			reg = <0x42080000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usart2: serial@400e0000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x400e0000 0x400>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ck_flexgen_08>;
+				status = "disabled";
+			};
+		};
+
+		syscfg: syscon@44230000 {
+			compatible = "st,stm32mp25-syscfg", "syscon";
+			reg = <0x44230000 0x10000>;
+		};
+
+		pinctrl: pinctrl@44240000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp257-pinctrl";
+			ranges = <0 0x44240000 0xa0400>;
+			pins-are-numbered;
+
+			gpioa: gpio@44240000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOA";
+				status = "disabled";
+			};
+
+			gpiob: gpio@44250000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x10000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOB";
+				status = "disabled";
+			};
+
+			gpioc: gpio@44260000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x20000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOC";
+				status = "disabled";
+			};
+
+			gpiod: gpio@44270000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x30000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOD";
+				status = "disabled";
+			};
+
+			gpioe: gpio@44280000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x40000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOE";
+				status = "disabled";
+			};
+
+			gpiof: gpio@44290000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x50000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOF";
+				status = "disabled";
+			};
+
+			gpiog: gpio@442a0000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x60000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOG";
+				status = "disabled";
+			};
+
+			gpioh: gpio@442b0000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x70000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOH";
+				status = "disabled";
+			};
+
+			gpioi: gpio@442c0000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x80000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOI";
+				status = "disabled";
+			};
+
+			gpioj: gpio@442d0000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x90000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOJ";
+				status = "disabled";
+			};
+
+			gpiok: gpio@442e0000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0xa0000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOK";
+				status = "disabled";
+			};
+		};
+
+		pinctrl_z: pinctrl@46200000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp257-z-pinctrl";
+			ranges = <0 0x46200000 0x400>;
+			pins-are-numbered;
+
+			gpioz: gpio@46200000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOZ";
+				st,bank-ioport = <11>;
+				status = "disabled";
+			};
+
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp253.dtsi b/arch/arm64/boot/dts/st/stm32mp253.dtsi
new file mode 100644
index 000000000000..af48e82efe8a
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp253.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include "stm32mp251.dtsi"
+
+/ {
+	cpus {
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a35";
+			device_type = "cpu";
+			reg = <1>;
+			enable-method = "psci";
+		};
+	};
+
+	arm-pmu {
+		interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp255.dtsi b/arch/arm64/boot/dts/st/stm32mp255.dtsi
new file mode 100644
index 000000000000..e6fa596211f5
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp255.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include "stm32mp253.dtsi"
+
+/ {
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp257.dtsi b/arch/arm64/boot/dts/st/stm32mp257.dtsi
new file mode 100644
index 000000000000..5c5000d3d9db
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp257.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include "stm32mp255.dtsi"
+
+/ {
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp25xc.dtsi b/arch/arm64/boot/dts/st/stm32mp25xc.dtsi
new file mode 100644
index 000000000000..5e83a6926485
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp25xc.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/ {
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp25xf.dtsi b/arch/arm64/boot/dts/st/stm32mp25xf.dtsi
new file mode 100644
index 000000000000..5e83a6926485
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp25xf.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/ {
+};
-- 
2.17.1


  parent reply	other threads:[~2023-05-29 16:23 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-29 16:20 [PATCH 00/11] Add STM32MP25 support Alexandre Torgue
2023-05-29 16:20 ` [PATCH 01/11] dt-bindings: pinctrl: stm32: support for stm32mp257 and additional packages Alexandre Torgue
2023-05-29 16:20 ` [PATCH 02/11] pinctrl: stm32: add stm32mp257 pinctrl support Alexandre Torgue
     [not found]   ` <20230529-enrich-clammy-14b498baf09f@spud>
2023-05-30  8:38     ` Alexandre TORGUE
2023-05-30  8:56       ` Conor Dooley
2023-05-30 12:08         ` Alexandre TORGUE
2023-05-29 16:20 ` [PATCH 03/11] dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon Alexandre Torgue
     [not found]   ` <d35fdc37-a793-3109-1474-065dffb03069@linaro.org>
2023-06-02 12:24     ` Alexandre TORGUE
2023-06-02 13:14   ` Krzysztof Kozlowski
2023-05-29 16:20 ` [PATCH 04/11] dt-bindings: stm32: add st,stm32mp25 compatibles to the stm32 family Alexandre Torgue
     [not found]   ` <20230529-backlit-dealing-b099e4eb5210@spud>
2023-05-30  8:39     ` Alexandre TORGUE
     [not found]       ` <25d61668-0b79-8565-0de8-dad7e80e3798@linaro.org>
2023-06-02 12:26         ` Alexandre TORGUE
2023-06-02 13:13       ` Krzysztof Kozlowski
2023-05-29 16:20 ` [PATCH 05/11] arm64: introduce STM32 family on Armv8 architecture Alexandre Torgue
2023-05-29 16:20 ` Alexandre Torgue [this message]
2023-05-29 16:20 ` [PATCH 07/11] arm64: dts: st: introduce stm32mp25 pinctrl files Alexandre Torgue
2023-05-29 16:20 ` [PATCH 08/11] dt-bindings: stm32: document stm32mp257f-ev1 board Alexandre Torgue
2023-05-29 16:20 ` [PATCH 09/11] arm64: dts: st: add stm32mp257f-ev1 board support Alexandre Torgue
2023-05-29 16:20 ` [PATCH 10/11] arm64: defconfig: enable ARCH_STM32 and STM32 serial driver Alexandre Torgue
2023-05-29 16:20 ` [PATCH 11/11] MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE Alexandre Torgue
2023-05-30 12:39 ` [PATCH 00/11] Add STM32MP25 support Linus Walleij
2023-05-30 13:32   ` Alexandre TORGUE

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230529162034.20481-7-alexandre.torgue@foss.st.com \
    --to=alexandre.torgue@foss.st.com \
    --cc=arnd@arndb.de \
    --cc=catalin.marinas@arm.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=olof@lixom.net \
    --cc=robh+dt@kernel.org \
    --cc=soc@kernel.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).