Re: [PATCH v7 5/9] serial: sc16is7xx: fix regression with GPIO configuration

[Greg KH <gregkh@linuxfoundation.org>]

On Fri, Jun 02, 2023 at 11:26:21AM -0400, Hugo Villeneuve wrote:
> From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> 
> Commit 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines")
> and commit 21144bab4f11 ("sc16is7xx: Handle modem status lines")
> changed the function of the GPIOs pins to act as modem control
> lines without any possibility of selecting GPIO function.
> 
> As a consequence, applications that depends on GPIO lines configured
> by default as GPIO pins no longer work as expected.
> 
> Also, the change to select modem control lines function was done only
> for channel A of dual UART variants (752/762). This was not documented
> in the log message.
> 
> Allow to specify GPIO or modem control line function in the device
> tree, and for each of the ports (A or B).
> 
> Do so by using the new device-tree property named
> "modem-control-line-ports" (property added in separate patch).
> 
> When registering GPIO chip controller, mask-out GPIO pins declared as
> modem control lines according to this new "modem-control-line-ports"
> DT property.
> 
> Boards that need to have GPIOS configured as modem control lines
> should add that property to their device tree. Here is a list of
> boards using the sc16is7xx driver in their device tree and that may
> need to be modified:
>     arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
>     mips/boot/dts/ingenic/cu1830-neo.dts
>     mips/boot/dts/ingenic/cu1000-neo.dts
> 
> Fixes: 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines")
> Fixes: 21144bab4f11 ("sc16is7xx: Handle modem status lines")
> Cc: <stable@vger.kernel.org> # 6.1.x: 35210b22 dt-bindings: sc16is7xx: Add property to change GPIO function
> Cc: <stable@vger.kernel.org> # 6.1.x: 7d61ca47 serial: sc16is7xx: refactor GPIO controller registration
> Cc: <stable@vger.kernel.org> # 6.1.x: 322470ed serial: sc16is7xx: mark IOCONTROL register as volatile
> Cc: <stable@vger.kernel.org> # 6.1.x: a0077362 serial: sc16is7xx: fix broken port 0 uart init
> Cc: <stable@vger.kernel.org> # 6.1.x
> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> ---
>  drivers/tty/serial/sc16is7xx.c | 103 ++++++++++++++++++++++++++-------
>  1 file changed, 82 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
> index 7d50674d2d0e..edc83f5f6340 100644
> --- a/drivers/tty/serial/sc16is7xx.c
> +++ b/drivers/tty/serial/sc16is7xx.c
> @@ -236,7 +236,8 @@
>  
>  /* IOControl register bits (Only 750/760) */
>  #define SC16IS7XX_IOCONTROL_LATCH_BIT	(1 << 0) /* Enable input latching */
> -#define SC16IS7XX_IOCONTROL_MODEM_BIT	(1 << 1) /* Enable GPIO[7:4] as modem pins */
> +#define SC16IS7XX_IOCONTROL_MODEM_A_BIT	(1 << 1) /* Enable GPIO[7:4] as modem A pins */
> +#define SC16IS7XX_IOCONTROL_MODEM_B_BIT	(1 << 2) /* Enable GPIO[3:0] as modem B pins */
>  #define SC16IS7XX_IOCONTROL_SRESET_BIT	(1 << 3) /* Software Reset */
>  
>  /* EFCR register bits */
> @@ -301,12 +302,12 @@
>  /* Misc definitions */
>  #define SC16IS7XX_FIFO_SIZE		(64)
>  #define SC16IS7XX_REG_SHIFT		2
> +#define SC16IS7XX_GPIOS_PER_BANK	4
>  
>  struct sc16is7xx_devtype {
>  	char	name[10];
>  	int	nr_gpio;
>  	int	nr_uart;
> -	int	has_mctrl;
>  };
>  
>  #define SC16IS7XX_RECONF_MD		(1 << 0)
> @@ -336,6 +337,7 @@ struct sc16is7xx_port {
>  	struct clk			*clk;
>  #ifdef CONFIG_GPIOLIB
>  	struct gpio_chip		gpio;
> +	unsigned long			gpio_valid_mask;
>  #endif
>  	unsigned char			buf[SC16IS7XX_FIFO_SIZE];
>  	struct kthread_worker		kworker;
> @@ -447,35 +449,30 @@ static const struct sc16is7xx_devtype sc16is74x_devtype = {
>  	.name		= "SC16IS74X",
>  	.nr_gpio	= 0,
>  	.nr_uart	= 1,
> -	.has_mctrl	= 0,
>  };
>  
>  static const struct sc16is7xx_devtype sc16is750_devtype = {
>  	.name		= "SC16IS750",
> -	.nr_gpio	= 4,
> +	.nr_gpio	= 8,
>  	.nr_uart	= 1,
> -	.has_mctrl	= 1,
>  };
>  
>  static const struct sc16is7xx_devtype sc16is752_devtype = {
>  	.name		= "SC16IS752",
> -	.nr_gpio	= 0,
> +	.nr_gpio	= 8,
>  	.nr_uart	= 2,
> -	.has_mctrl	= 1,
>  };
>  
>  static const struct sc16is7xx_devtype sc16is760_devtype = {
>  	.name		= "SC16IS760",
> -	.nr_gpio	= 4,
> +	.nr_gpio	= 8,
>  	.nr_uart	= 1,
> -	.has_mctrl	= 1,
>  };
>  
>  static const struct sc16is7xx_devtype sc16is762_devtype = {
>  	.name		= "SC16IS762",
> -	.nr_gpio	= 0,
> +	.nr_gpio	= 8,
>  	.nr_uart	= 2,
> -	.has_mctrl	= 1,
>  };
>  
>  static bool sc16is7xx_regmap_volatile(struct device *dev, unsigned int reg)
> @@ -1350,16 +1347,45 @@ static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip,
>  	return 0;
>  }
>  
> -static int sc16is7xx_setup_gpio_chip(struct device *dev)
> +static int sc16is7xx_gpio_init_valid_mask(struct gpio_chip *chip,
> +					  unsigned long *valid_mask,
> +					  unsigned int ngpios)
> +{
> +	struct sc16is7xx_port *s = gpiochip_get_data(chip);
> +
> +	*valid_mask = s->gpio_valid_mask;
> +
> +	return 0;
> +}
> +
> +static int sc16is7xx_setup_gpio_chip(struct device *dev, u8 mctrl_mask)
>  {
>  	struct sc16is7xx_port *s = dev_get_drvdata(dev);
>  
>  	if (!s->devtype->nr_gpio)
>  		return 0;
>  
> +	switch (mctrl_mask) {
> +	case 0:
> +		s->gpio_valid_mask = GENMASK(7, 0);
> +		break;
> +	case SC16IS7XX_IOCONTROL_MODEM_A_BIT:
> +		s->gpio_valid_mask = GENMASK(3, 0);
> +		break;
> +	case SC16IS7XX_IOCONTROL_MODEM_B_BIT:
> +		s->gpio_valid_mask = GENMASK(7, 4);
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	if (s->gpio_valid_mask == 0)
> +		return 0;
> +
>  	s->gpio.owner		 = THIS_MODULE;
>  	s->gpio.parent		 = dev;
>  	s->gpio.label		 = dev_name(dev);
> +	s->gpio.init_valid_mask	 = sc16is7xx_gpio_init_valid_mask;
>  	s->gpio.direction_input	 = sc16is7xx_gpio_direction_input;
>  	s->gpio.get		 = sc16is7xx_gpio_get;
>  	s->gpio.direction_output = sc16is7xx_gpio_direction_output;
> @@ -1371,6 +1397,44 @@ static int sc16is7xx_setup_gpio_chip(struct device *dev)
>  }
>  #endif
>  
> +static u8 sc16is7xx_setup_mctrl_ports(struct device *dev)

This returns what, mctrl?  If so, please document that, it doesn't look
obvious.  And as the kernel test robot reported, you do nothing with the
return value so why compute it?

And you have a real port here, no need to pass in a "raw" struct device,
right?

thanks,

greg k-h