[PATCH v1 1/1] pinctrl: cherryview: Return correct value if pin in push-pull mode

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

Currently the getter returns ENOTSUPP on pin configured in
the push-pull mode. Fix this by adding the missed switch case.

Fixes: ccdf81d08dbe ("pinctrl: cherryview: add option to set open-drain pin config")
Fixes: 6e08d6bbebeb ("pinctrl: Add Intel Cherryview/Braswell pin controller support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pinctrl/intel/pinctrl-cherryview.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c
index ee333337bc1b..b25717d54f69 100644
--- a/drivers/pinctrl/intel/pinctrl-cherryview.c
+++ b/drivers/pinctrl/intel/pinctrl-cherryview.c
@@ -949,11 +949,6 @@ static int chv_config_get(struct pinctrl_dev *pctldev, unsigned int pin,
 
 		break;
 
-	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
-		if (!(ctrl1 & CHV_PADCTRL1_ODEN))
-			return -EINVAL;
-		break;
-
 	case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: {
 		u32 cfg;
 
@@ -963,6 +958,16 @@ static int chv_config_get(struct pinctrl_dev *pctldev, unsigned int pin,
 			return -EINVAL;
 
 		break;
+
+	case PIN_CONFIG_DRIVE_PUSH_PULL:
+		if (ctrl1 & CHV_PADCTRL1_ODEN)
+			return -EINVAL;
+		break;
+
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		if (!(ctrl1 & CHV_PADCTRL1_ODEN))
+			return -EINVAL;
+		break;
 	}
 
 	default:
-- 
2.40.0.1.gaa8946217a0b