From: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-clk@vger.kernel.org, linux-hwmon@vger.kernel.org,
linux-pm@vger.kernel.org, linux-gpio@vger.kernel.org
Subject: Re: [PATCH] dt-bindings: use capital "OR" for multiple licenses in SPDX
Date: Wed, 23 Aug 2023 14:49:02 -0500 [thread overview]
Message-ID: <20230823194902.GA2782125-robh@kernel.org> (raw)
In-Reply-To: <20230823084540.112602-1-krzysztof.kozlowski@linaro.org>
On Wed, Aug 23, 2023 at 10:45:40AM +0200, Krzysztof Kozlowski wrote:
> Documentation/process/license-rules.rst and checkpatch expect the SPDX
> identifier syntax for multiple licenses to use capital "OR". Correct it
> to keep consistent format and avoid copy-paste issues.
>
> Correct also the format // -> .* in few Allwinner binding headers as
> pointed out by checkpatch:
>
> WARNING: Improper SPDX comment style for 'include/dt-bindings/reset/sun50i-h6-ccu.h', please use '/*' instead
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> Rebased on next-20230822, so might not apply cleanly. What does not
> apply, can be skipped and I will fix it after next RC.
> ---
> Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml | 2 +-
> .../devicetree/bindings/arm/arm,coresight-dummy-sink.yaml | 2 +-
> .../devicetree/bindings/arm/arm,coresight-dummy-source.yaml | 2 +-
> .../devicetree/bindings/arm/arm,embedded-trace-extension.yaml | 2 +-
> .../devicetree/bindings/arm/arm,trace-buffer-extension.yaml | 2 +-
> Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml | 2 +-
> Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 2 +-
> .../devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml | 2 +-
> Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml | 2 +-
> Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml | 2 +-
> Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml | 2 +-
> Documentation/devicetree/bindings/clock/ti,cdce925.yaml | 2 +-
> Documentation/devicetree/bindings/clock/ti,sci-clk.yaml | 2 +-
> Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml | 2 +-
> .../devicetree/bindings/display/msm/dsi-controller-main.yaml | 2 +-
> Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml | 2 +-
> Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml | 2 +-
> Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml | 2 +-
> Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml | 2 +-
> Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml | 2 +-
> .../devicetree/bindings/display/msm/dsi-phy-common.yaml | 2 +-
> Documentation/devicetree/bindings/display/msm/mdss-common.yaml | 2 +-
> Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml | 2 +-
> Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml | 2 +-
> .../devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml | 2 +-
> .../devicetree/bindings/display/panel/himax,hx8394.yaml | 2 +-
> .../devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml | 2 +-
> .../devicetree/bindings/display/panel/orisetech,otm8009a.yaml | 2 +-
> .../devicetree/bindings/display/panel/panel-dsi-cm.yaml | 2 +-
> .../devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml | 2 +-
> .../devicetree/bindings/display/panel/panel-simple-dsi.yaml | 2 +-
> .../devicetree/bindings/display/panel/raydium,rm68200.yaml | 2 +-
> .../devicetree/bindings/display/panel/rocktech,jh057n00900.yaml | 2 +-
> .../devicetree/bindings/display/panel/visionox,r66451.yaml | 2 +-
> .../devicetree/bindings/display/panel/visionox,rm69299.yaml | 2 +-
> .../devicetree/bindings/display/panel/visionox,vtdr6130.yaml | 2 +-
> .../devicetree/bindings/display/rockchip/rockchip-vop2.yaml | 2 +-
> .../bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml | 2 +-
> .../devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml | 2 +-
> Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml | 2 +-
> Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml | 2 +-
> Documentation/devicetree/bindings/hwmon/lm75.yaml | 2 +-
> Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml | 2 +-
> Documentation/devicetree/bindings/hwmon/national,lm90.yaml | 2 +-
> Documentation/devicetree/bindings/hwmon/nxp,mc34vr500.yaml | 2 +-
> Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml | 2 +-
> Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml | 2 +-
> Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml | 2 +-
> Documentation/devicetree/bindings/input/elan,ekth3000.yaml | 2 +-
> .../devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml | 2 +-
> Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml | 2 +-
> Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml | 2 +-
> .../devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml | 2 +-
> .../devicetree/bindings/phy/nvidia,tegra210-xusb-padctl.yaml | 2 +-
> .../devicetree/bindings/power/reset/gpio-poweroff.yaml | 2 +-
> Documentation/devicetree/bindings/power/reset/gpio-restart.yaml | 2 +-
> .../devicetree/bindings/power/reset/restart-handler.yaml | 2 +-
> Documentation/devicetree/bindings/power/supply/bq256xx.yaml | 2 +-
> .../devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml | 2 +-
> .../devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml | 2 +-
> .../devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml | 2 +-
> .../devicetree/bindings/remoteproc/ti,pru-consumer.yaml | 2 +-
> Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml | 2 +-
> .../devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml | 2 +-
> Documentation/devicetree/bindings/reset/ti,sci-reset.yaml | 2 +-
> Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml | 2 +-
> Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml | 2 +-
> Documentation/devicetree/bindings/usb/cypress,hx3.yaml | 2 +-
> Documentation/devicetree/bindings/usb/genesys,gl850g.yaml | 2 +-
> Documentation/devicetree/bindings/usb/realtek,rts5411.yaml | 2 +-
> Documentation/devicetree/bindings/usb/ti,usb8041.yaml | 2 +-
> Documentation/devicetree/bindings/usb/vialab,vl817.yaml | 2 +-
> include/dt-bindings/ata/ahci.h | 2 +-
> include/dt-bindings/clock/hi3559av100-clock.h | 2 +-
> include/dt-bindings/clock/r8a779f0-cpg-mssr.h | 2 +-
> include/dt-bindings/clock/rockchip,rk3588-cru.h | 2 +-
> include/dt-bindings/clock/stm32mp1-clks.h | 2 +-
> include/dt-bindings/clock/sun20i-d1-ccu.h | 2 +-
> include/dt-bindings/clock/sun20i-d1-r-ccu.h | 2 +-
> include/dt-bindings/clock/sun50i-a100-ccu.h | 2 +-
> include/dt-bindings/clock/sun50i-h6-ccu.h | 2 +-
> include/dt-bindings/clock/sun50i-h616-ccu.h | 2 +-
> include/dt-bindings/clock/sun6i-rtc.h | 2 +-
> include/dt-bindings/display/sdtv-standards.h | 2 +-
> include/dt-bindings/gpio/meson-g12a-gpio.h | 2 +-
> include/dt-bindings/power/amlogic,c3-pwrc.h | 2 +-
> include/dt-bindings/power/meson-a1-power.h | 2 +-
> include/dt-bindings/power/meson-axg-power.h | 2 +-
> include/dt-bindings/power/meson-g12a-power.h | 2 +-
> include/dt-bindings/power/meson-gxbb-power.h | 2 +-
> include/dt-bindings/power/meson-s4-power.h | 2 +-
> include/dt-bindings/power/meson-sm1-power.h | 2 +-
> include/dt-bindings/power/meson8-power.h | 2 +-
> include/dt-bindings/power/r8a779f0-sysc.h | 2 +-
> include/dt-bindings/power/rk3588-power.h | 2 +-
> include/dt-bindings/power/summit,smb347-charger.h | 2 +-
> include/dt-bindings/reset/rockchip,rk3588-cru.h | 2 +-
> include/dt-bindings/reset/stm32mp1-resets.h | 2 +-
> include/dt-bindings/reset/sun20i-d1-ccu.h | 2 +-
> include/dt-bindings/reset/sun20i-d1-r-ccu.h | 2 +-
> include/dt-bindings/reset/sun50i-a100-ccu.h | 2 +-
> include/dt-bindings/reset/sun50i-a100-r-ccu.h | 2 +-
> include/dt-bindings/reset/sun50i-h6-ccu.h | 2 +-
> include/dt-bindings/reset/sun50i-h6-r-ccu.h | 2 +-
> include/dt-bindings/reset/sun50i-h616-ccu.h | 2 +-
> 130 files changed, 130 insertions(+), 130 deletions(-)
Applied, thanks!
Rob
prev parent reply other threads:[~2023-08-23 19:49 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-23 8:45 [PATCH] dt-bindings: use capital "OR" for multiple licenses in SPDX Krzysztof Kozlowski
2023-08-23 13:39 ` Guenter Roeck
2023-08-23 18:06 ` Stephen Boyd
2023-08-23 19:49 ` Rob Herring [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230823194902.GA2782125-robh@kernel.org \
--to=robh@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).