From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <brgl@bgdev.pl>,
Andy Shevchenko <andy@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Stefan Agner <stefan@agner.ch>, Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>
Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, Peng Fan <peng.fan@nxp.com>
Subject: [PATCH v2 6/6] arm64: dts: imx93: update gpio node
Date: Sat, 16 Sep 2023 10:04:02 +0800 [thread overview]
Message-ID: <20230916-vf610-gpio-v2-6-40823da788d7@nxp.com> (raw)
In-Reply-To: <20230916-vf610-gpio-v2-0-40823da788d7@nxp.com>
From: Peng Fan <peng.fan@nxp.com>
Per binding doc, i.MX93 GPIO supports two interrupts and one register
base, compatible with i.MX8ULP. So update the node
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
arch/arm64/boot/dts/freescale/imx93.dtsi | 28 ++++++++++++++++------------
1 file changed, 16 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 6f85a05ee7e1..4b111b8c1931 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -825,11 +825,12 @@ usdhc3: mmc@428b0000 {
};
gpio2: gpio@43810080 {
- compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
- reg = <0x43810080 0x1000>, <0x43810040 0x40>;
+ compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+ reg = <0x43810000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&clk IMX93_CLK_GPIO2_GATE>,
@@ -839,11 +840,12 @@ gpio2: gpio@43810080 {
};
gpio3: gpio@43820080 {
- compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
- reg = <0x43820080 0x1000>, <0x43820040 0x40>;
+ compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+ reg = <0x43820000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
- interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&clk IMX93_CLK_GPIO3_GATE>,
@@ -854,11 +856,12 @@ gpio3: gpio@43820080 {
};
gpio4: gpio@43830080 {
- compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
- reg = <0x43830080 0x1000>, <0x43830040 0x40>;
+ compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+ reg = <0x43830000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
- interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&clk IMX93_CLK_GPIO4_GATE>,
@@ -868,11 +871,12 @@ gpio4: gpio@43830080 {
};
gpio1: gpio@47400080 {
- compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
- reg = <0x47400080 0x1000>, <0x47400040 0x40>;
+ compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+ reg = <0x47400000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&clk IMX93_CLK_GPIO1_GATE>,
--
2.37.1
prev parent reply other threads:[~2023-09-16 2:01 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-16 2:03 [PATCH v2 0/6] gpio: update i.MX93/8ULP and support i.MX95 Peng Fan (OSS)
2023-09-16 2:03 ` [PATCH v2 1/6] dt-bindings: gpio: vf610: update gpio-ranges Peng Fan (OSS)
2023-09-17 7:46 ` Krzysztof Kozlowski
2023-09-16 2:03 ` [PATCH v2 2/6] dt-bindings: gpio: vf610: correct i.MX8ULP and i.MX93 Peng Fan (OSS)
2023-09-17 7:52 ` Krzysztof Kozlowski
2023-09-17 12:46 ` Peng Fan
2023-09-16 2:03 ` [PATCH v2 3/6] dt-bindings: gpio: vf610: add i.MX95 compatible Peng Fan (OSS)
2023-09-17 7:52 ` Krzysztof Kozlowski
2023-09-16 2:04 ` [PATCH v2 4/6] gpio: vf610: add i.MX8ULP of_device_id entry Peng Fan (OSS)
2023-09-16 2:04 ` [PATCH v2 5/6] arm64: dts: imx8ulp: update gpio node Peng Fan (OSS)
2023-09-17 7:48 ` Krzysztof Kozlowski
2023-09-17 12:51 ` Peng Fan
2023-09-16 2:04 ` Peng Fan (OSS) [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230916-vf610-gpio-v2-6-40823da788d7@nxp.com \
--to=peng.fan@oss.nxp.com \
--cc=andy@kernel.org \
--cc=brgl@bgdev.pl \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peng.fan@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).