[PATCH v4 4/7] gpio: vf610: add i.MX8ULP of_device_id entry

["Peng Fan (OSS)" <peng.fan@oss.nxp.com>]

From: Peng Fan <peng.fan@nxp.com>

i.MX8ULP/93 GPIO supports similar feature as i.MX7ULP GPIO, but i.MX8ULP is
actually not hardware compatible with i.MX7ULP. i.MX8ULP only has one
register base, not two bases. i.MX8ULP and i.MX93 actually has two interrupts
for each gpio controller, one for Trustzone non-secure world, one for
secure world.

Although the Linux Kernel driver gpio-vf610.c could work with
fsl,imx7ulp-gpio compatible, it is based on some tricks did in device tree
with some offset added to base address.

Add a new of_device_id entry for i.MX8ULP. But to make the driver could
also support old bindings, check the compatible string first, before
check the device data.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/gpio/gpio-vf610.c | 40 ++++++++++++++++++++++++++++++++++------
 1 file changed, 34 insertions(+), 6 deletions(-)

diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
index dbc7ba0ee72c..49867d5db642 100644
--- a/drivers/gpio/gpio-vf610.c
+++ b/drivers/gpio/gpio-vf610.c
@@ -25,6 +25,7 @@
 struct fsl_gpio_soc_data {
 	/* SoCs has a Port Data Direction Register (PDDR) */
 	bool have_paddr;
+	bool have_dual_base;
 };
 
 struct vf610_gpio_port {
@@ -60,13 +61,22 @@ struct vf610_gpio_port {
 #define PORT_INT_EITHER_EDGE	0xb
 #define PORT_INT_LOGIC_ONE	0xc
 
+#define IMX8ULP_GPIO_BASE_OFF	0x40
+#define IMX8ULP_BASE_OFF	0x80
+
 static const struct fsl_gpio_soc_data imx_data = {
 	.have_paddr = true,
+	.have_dual_base = true,
+};
+
+static const struct fsl_gpio_soc_data imx8ulp_data = {
+	.have_paddr = true,
 };
 
 static const struct of_device_id vf610_gpio_dt_ids[] = {
 	{ .compatible = "fsl,vf610-gpio",	.data = NULL, },
 	{ .compatible = "fsl,imx7ulp-gpio",	.data = &imx_data, },
+	{ .compatible = "fsl,imx8ulp-gpio",	.data = &imx8ulp_data, },
 	{ /* sentinel */ }
 };
 
@@ -263,19 +273,37 @@ static int vf610_gpio_probe(struct platform_device *pdev)
 	struct gpio_irq_chip *girq;
 	int i;
 	int ret;
+	bool dual_base = false;
 
 	port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
 	if (!port)
 		return -ENOMEM;
 
 	port->sdata = of_device_get_match_data(dev);
-	port->base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(port->base))
-		return PTR_ERR(port->base);
 
-	port->gpio_base = devm_platform_ioremap_resource(pdev, 1);
-	if (IS_ERR(port->gpio_base))
-		return PTR_ERR(port->gpio_base);
+	/* support old compatible strings */
+	if (device_is_compatible(dev, "fsl,imx7ulp-gpio") &&
+	    (device_is_compatible(dev, "fsl,imx93-gpio") ||
+	    (device_is_compatible(dev, "fsl,imx8ulp-gpio"))))
+		dual_base = true;
+
+	if ((port->sdata && port->sdata->have_dual_base) || dual_base) {
+		port->base = devm_platform_ioremap_resource(pdev, 0);
+		if (IS_ERR(port->base))
+			return PTR_ERR(port->base);
+
+		port->gpio_base = devm_platform_ioremap_resource(pdev, 1);
+		if (IS_ERR(port->gpio_base))
+			return PTR_ERR(port->gpio_base);
+	} else {
+		port->base = devm_platform_ioremap_resource(pdev, 0);
+		if (IS_ERR(port->base))
+			return PTR_ERR(port->base);
+
+		port->gpio_base = port->base + IMX8ULP_GPIO_BASE_OFF;
+		port->base = port->base + IMX8ULP_BASE_OFF;
+	}
+
 
 	port->irq = platform_get_irq(pdev, 0);
 	if (port->irq < 0)

-- 
2.37.1