From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Linus Walleij <linus.walleij@linaro.org>,
Andy Shevchenko <andy@kernel.org>
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Subject: [PATCH 02/36] pinctrl: provide new GPIO-to-pinctrl glue helpers
Date: Tue, 3 Oct 2023 16:50:40 +0200 [thread overview]
Message-ID: <20231003145114.21637-3-brgl@bgdev.pl> (raw)
In-Reply-To: <20231003145114.21637-1-brgl@bgdev.pl>
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Currently the pinctrl GPIO helpers all take a number from the global
GPIO numberspace - of which we're trying to get rid of as argument.
These helpers are almost universally called from GPIOLIB driver
callbacks which take a pointer to the backing gpio_chip and the
controller-relative offset as arguments.
Let's provide improved variants of these functions that match the
GPIOLIB signatures as the first step in removing the older flavor.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
drivers/pinctrl/core.c | 107 ++++++++++++++++++++++---------
include/linux/pinctrl/consumer.h | 46 +++++++++++++
2 files changed, 124 insertions(+), 29 deletions(-)
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index e2f7519bef04..679f48c5beeb 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -23,6 +23,7 @@
#include <linux/seq_file.h>
#include <linux/slab.h>
+#include <linux/gpio/driver.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/devinfo.h>
#include <linux/pinctrl/machine.h>
@@ -781,14 +782,13 @@ bool pinctrl_gpio_can_use_line(unsigned gpio)
}
EXPORT_SYMBOL_GPL(pinctrl_gpio_can_use_line);
-/**
- * pinctrl_gpio_request() - request a single pin to be used as GPIO
- * @gpio: the GPIO pin number from the GPIO subsystem number space
- *
- * This function should *ONLY* be used from gpiolib-based GPIO drivers,
- * as part of their gpio_request() semantics, platforms and individual drivers
- * shall *NOT* request GPIO pins to be muxed in.
- */
+bool pinctrl_gpio_can_use_line_new(struct gpio_chip *gc, unsigned int offset)
+{
+ return pinctrl_gpio_can_use_line(gc->base + offset);
+}
+EXPORT_SYMBOL_GPL(pinctrl_gpio_can_use_line_new);
+
+/* This function is deprecated and will be removed. Don't use. */
int pinctrl_gpio_request(unsigned gpio)
{
struct pinctrl_dev *pctldev;
@@ -817,13 +817,21 @@ int pinctrl_gpio_request(unsigned gpio)
EXPORT_SYMBOL_GPL(pinctrl_gpio_request);
/**
- * pinctrl_gpio_free() - free control on a single pin, currently used as GPIO
- * @gpio: the GPIO pin number from the GPIO subsystem number space
+ * pinctrl_gpio_request_new() - request a single pin to be used as GPIO
+ * @gc: GPIO chip structure from the GPIO subsystem
+ * @offset: hardware offset of the GPIO relative to the controller
*
* This function should *ONLY* be used from gpiolib-based GPIO drivers,
- * as part of their gpio_free() semantics, platforms and individual drivers
- * shall *NOT* request GPIO pins to be muxed out.
+ * as part of their gpio_request() semantics, platforms and individual drivers
+ * shall *NOT* request GPIO pins to be muxed in.
*/
+int pinctrl_gpio_request_new(struct gpio_chip *gc, unsigned int offset)
+{
+ return pinctrl_gpio_request(gc->base + offset);
+}
+EXPORT_SYMBOL_GPL(pinctrl_gpio_request_new);
+
+/* This function is deprecated and will be removed. Don't use. */
void pinctrl_gpio_free(unsigned gpio)
{
struct pinctrl_dev *pctldev;
@@ -846,6 +854,21 @@ void pinctrl_gpio_free(unsigned gpio)
}
EXPORT_SYMBOL_GPL(pinctrl_gpio_free);
+/**
+ * pinctrl_gpio_free_new() - free control on a single pin, currently used as GPIO
+ * @gc: GPIO chip structure from the GPIO subsystem
+ * @offset: hardware offset of the GPIO relative to the controller
+ *
+ * This function should *ONLY* be used from gpiolib-based GPIO drivers,
+ * as part of their gpio_request() semantics, platforms and individual drivers
+ * shall *NOT* request GPIO pins to be muxed in.
+ */
+void pinctrl_gpio_free_new(struct gpio_chip *gc, unsigned int offset)
+{
+ return pinctrl_gpio_free(gc->base + offset);
+}
+EXPORT_SYMBOL_GPL(pinctrl_gpio_free_new);
+
static int pinctrl_gpio_direction(unsigned gpio, bool input)
{
struct pinctrl_dev *pctldev;
@@ -869,14 +892,7 @@ static int pinctrl_gpio_direction(unsigned gpio, bool input)
return ret;
}
-/**
- * pinctrl_gpio_direction_input() - request a GPIO pin to go into input mode
- * @gpio: the GPIO pin number from the GPIO subsystem number space
- *
- * This function should *ONLY* be used from gpiolib-based GPIO drivers,
- * as part of their gpio_direction_input() semantics, platforms and individual
- * drivers shall *NOT* touch pin control GPIO calls.
- */
+/* This function is deprecated and will be removed. Don't use. */
int pinctrl_gpio_direction_input(unsigned gpio)
{
return pinctrl_gpio_direction(gpio, true);
@@ -884,13 +900,21 @@ int pinctrl_gpio_direction_input(unsigned gpio)
EXPORT_SYMBOL_GPL(pinctrl_gpio_direction_input);
/**
- * pinctrl_gpio_direction_output() - request a GPIO pin to go into output mode
- * @gpio: the GPIO pin number from the GPIO subsystem number space
+ * pinctrl_gpio_direction_input_new() - request a GPIO pin to go into input mode
+ * @gc: GPIO chip structure from the GPIO subsystem
+ * @offset: hardware offset of the GPIO relative to the controller
*
* This function should *ONLY* be used from gpiolib-based GPIO drivers,
- * as part of their gpio_direction_output() semantics, platforms and individual
+ * as part of their gpio_direction_input() semantics, platforms and individual
* drivers shall *NOT* touch pin control GPIO calls.
*/
+int pinctrl_gpio_direction_input_new(struct gpio_chip *gc, unsigned int offset)
+{
+ return pinctrl_gpio_direction_input(gc->base + offset);
+}
+EXPORT_SYMBOL_GPL(pinctrl_gpio_direction_input_new);
+
+/* This function is deprecated and will be removed. Don't use. */
int pinctrl_gpio_direction_output(unsigned gpio)
{
return pinctrl_gpio_direction(gpio, false);
@@ -898,14 +922,22 @@ int pinctrl_gpio_direction_output(unsigned gpio)
EXPORT_SYMBOL_GPL(pinctrl_gpio_direction_output);
/**
- * pinctrl_gpio_set_config() - Apply config to given GPIO pin
- * @gpio: the GPIO pin number from the GPIO subsystem number space
- * @config: the configuration to apply to the GPIO
+ * pinctrl_gpio_direction_output_new() - request a GPIO pin to go into output
+ * mode
+ * @gc: GPIO chip structure from the GPIO subsystem
+ * @offset: hardware offset of the GPIO relative to the controller
*
- * This function should *ONLY* be used from gpiolib-based GPIO drivers, if
- * they need to call the underlying pin controller to change GPIO config
- * (for example set debounce time).
+ * This function should *ONLY* be used from gpiolib-based GPIO drivers,
+ * as part of their gpio_direction_output() semantics, platforms and individual
+ * drivers shall *NOT* touch pin control GPIO calls.
*/
+int pinctrl_gpio_direction_output_new(struct gpio_chip *gc, unsigned int offset)
+{
+ return pinctrl_gpio_direction_output(gc->base + offset);
+}
+EXPORT_SYMBOL_GPL(pinctrl_gpio_direction_output_new);
+
+/* This function is deprecated and will be removed. Don't use. */
int pinctrl_gpio_set_config(unsigned gpio, unsigned long config)
{
unsigned long configs[] = { config };
@@ -926,6 +958,23 @@ int pinctrl_gpio_set_config(unsigned gpio, unsigned long config)
}
EXPORT_SYMBOL_GPL(pinctrl_gpio_set_config);
+/**
+ * pinctrl_gpio_set_config_new() - Apply config to given GPIO pin
+ * @gc: GPIO chip structure from the GPIO subsystem
+ * @offset: hardware offset of the GPIO relative to the controller
+ * @config: the configuration to apply to the GPIO
+ *
+ * This function should *ONLY* be used from gpiolib-based GPIO drivers, if
+ * they need to call the underlying pin controller to change GPIO config
+ * (for example set debounce time).
+ */
+int pinctrl_gpio_set_config_new(struct gpio_chip *gc, unsigned int offset,
+ unsigned long config)
+{
+ return pinctrl_gpio_set_config(gc->base + offset, config);
+}
+EXPORT_SYMBOL_GPL(pinctrl_gpio_set_config_new);
+
static struct pinctrl_state *find_state(struct pinctrl *p,
const char *name)
{
diff --git a/include/linux/pinctrl/consumer.h b/include/linux/pinctrl/consumer.h
index 22eef0a513ce..c95c13983376 100644
--- a/include/linux/pinctrl/consumer.h
+++ b/include/linux/pinctrl/consumer.h
@@ -17,6 +17,7 @@
#include <linux/pinctrl/pinctrl-state.h>
struct device;
+struct gpio_chip;
/* This struct is private to the core and should be regarded as a cookie */
struct pinctrl;
@@ -26,11 +27,20 @@ struct pinctrl_state;
/* External interface to pin control */
bool pinctrl_gpio_can_use_line(unsigned gpio);
+bool pinctrl_gpio_can_use_line_new(struct gpio_chip *gc, unsigned int offset);
int pinctrl_gpio_request(unsigned gpio);
+int pinctrl_gpio_request_new(struct gpio_chip *gc, unsigned int offset);
void pinctrl_gpio_free(unsigned gpio);
+void pinctrl_gpio_free_new(struct gpio_chip *gc, unsigned int offset);
int pinctrl_gpio_direction_input(unsigned gpio);
+int pinctrl_gpio_direction_input_new(struct gpio_chip *gc,
+ unsigned int offset);
int pinctrl_gpio_direction_output(unsigned gpio);
+int pinctrl_gpio_direction_output_new(struct gpio_chip *gc,
+ unsigned int offset);
int pinctrl_gpio_set_config(unsigned gpio, unsigned long config);
+int pinctrl_gpio_set_config_new(struct gpio_chip *gc, unsigned int offset,
+ unsigned long config);
struct pinctrl * __must_check pinctrl_get(struct device *dev);
void pinctrl_put(struct pinctrl *p);
@@ -68,30 +78,66 @@ static inline bool pinctrl_gpio_can_use_line(unsigned gpio)
return true;
}
+static inline bool
+pinctrl_gpio_can_use_line_new(struct gpio_chip *gc, unsigned int offset)
+{
+ return true;
+}
+
static inline int pinctrl_gpio_request(unsigned gpio)
{
return 0;
}
+static inline int
+pinctrl_gpio_request_new(struct gpio_chip *gc, unsigned int offset)
+{
+ return 0;
+}
+
static inline void pinctrl_gpio_free(unsigned gpio)
{
}
+static inline void
+pinctrl_gpio_free_new(struct gpio_chip *gc, unsigned int offset)
+{
+}
+
static inline int pinctrl_gpio_direction_input(unsigned gpio)
{
return 0;
}
+static inline int
+pinctrl_gpio_direction_input_new(struct gpio_chip *gc, unsigned int offset)
+{
+ return 0;
+}
+
static inline int pinctrl_gpio_direction_output(unsigned gpio)
{
return 0;
}
+static inline int
+pinctrl_gpio_direction_output_new(struct gpio_chip *gc, unsigned int offset)
+{
+ return 0;
+}
+
static inline int pinctrl_gpio_set_config(unsigned gpio, unsigned long config)
{
return 0;
}
+static inline int
+pinctrl_gpio_set_config_new(struct gpio_chip *gc, unsigned int offset,
+ unsigned long config)
+{
+ return 0;
+}
+
static inline struct pinctrl * __must_check pinctrl_get(struct device *dev)
{
return NULL;
--
2.39.2
next prev parent reply other threads:[~2023-10-03 14:51 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-03 14:50 [PATCH 00/36] pinctrl: don't use GPIOLIB global numberspace in helpers Bartosz Golaszewski
2023-10-03 14:50 ` [PATCH 01/36] pinctrl: remove unneeded extern specifiers from consumer.h Bartosz Golaszewski
2023-10-03 21:39 ` Linus Walleij
2023-10-03 14:50 ` Bartosz Golaszewski [this message]
2023-10-03 15:08 ` [PATCH 02/36] pinctrl: provide new GPIO-to-pinctrl glue helpers Andy Shevchenko
2023-10-03 15:10 ` Andy Shevchenko
2023-10-03 14:50 ` [PATCH 03/36] gpiolib: generic: use new pinctrl GPIO helpers Bartosz Golaszewski
2023-10-03 15:14 ` Andy Shevchenko
2023-10-03 14:50 ` [PATCH 04/36] gpio: cdev: use pinctrl_gpio_can_use_line_new() Bartosz Golaszewski
2023-10-03 15:02 ` Kent Gibson
2023-10-03 15:17 ` Andy Shevchenko
2023-10-03 15:24 ` Kent Gibson
2023-10-03 18:07 ` Bartosz Golaszewski
2023-10-04 4:16 ` Kent Gibson
2023-10-04 7:52 ` Bartosz Golaszewski
2023-10-03 14:50 ` [PATCH 05/36] gpio: rcar: use new pinctrl GPIO helpers Bartosz Golaszewski
2023-10-09 11:22 ` Geert Uytterhoeven
2023-10-03 14:50 ` [PATCH 06/36] gpio: tegra: " Bartosz Golaszewski
2023-10-03 14:50 ` [PATCH 07/36] gpio: em: " Bartosz Golaszewski
2023-10-03 14:50 ` [PATCH 08/36] gpio: aspeed: " Bartosz Golaszewski
2023-10-03 23:30 ` Andrew Jeffery
2023-10-04 7:13 ` Bartosz Golaszewski
2023-10-09 9:45 ` Uwe Kleine-König
2023-10-03 14:50 ` [PATCH 09/36] gpio: mvebu: " Bartosz Golaszewski
2023-10-09 9:44 ` Uwe Kleine-König
2023-10-03 14:50 ` [PATCH 10/36] gpio: pxa: " Bartosz Golaszewski
2023-10-03 14:50 ` [PATCH 11/36] gpio: rockchip: " Bartosz Golaszewski
2023-10-05 9:58 ` Heiko Stübner
2023-10-03 14:50 ` [PATCH 12/36] gpio: vf610: " Bartosz Golaszewski
2023-10-03 14:50 ` [PATCH 13/36] pinctrl: nuvoton: " Bartosz Golaszewski
2023-10-03 14:50 ` [PATCH 14/36] pinctrl: renesas: " Bartosz Golaszewski
2023-10-09 11:22 ` Geert Uytterhoeven
2023-10-03 14:50 ` [PATCH 15/36] pinctrl: bcm: " Bartosz Golaszewski
2023-10-03 14:50 ` [PATCH 16/36] pinctrl: stm32: " Bartosz Golaszewski
2023-10-03 14:50 ` [PATCH 17/36] pinctrl: spear: " Bartosz Golaszewski
2023-10-04 6:01 ` Viresh Kumar
2023-10-03 14:50 ` [PATCH 18/36] pinctrl: starfive: " Bartosz Golaszewski
2023-10-04 9:37 ` Emil Renner Berthing
2023-10-04 9:39 ` Bartosz Golaszewski
2023-10-03 14:50 ` [PATCH 19/36] pinctrl: ocelot: " Bartosz Golaszewski
2023-10-03 14:50 ` [PATCH 20/36] pinctrl: rk805: " Bartosz Golaszewski
2023-10-03 14:50 ` [PATCH 21/36] pinctrl: cirrus: " Bartosz Golaszewski
2023-10-03 15:41 ` Charles Keepax
2023-10-03 14:51 ` [PATCH 22/36] pinctrl: mediatek: " Bartosz Golaszewski
2023-10-03 14:51 ` [PATCH 23/36] pinctrl: axp209: " Bartosz Golaszewski
2023-10-03 14:51 ` [PATCH 24/36] pinctrl: vt8500: " Bartosz Golaszewski
2023-10-03 14:51 ` [PATCH 25/36] pinctrl: cy8c95x0: " Bartosz Golaszewski
2023-10-03 15:11 ` Andy Shevchenko
2023-10-03 14:51 ` [PATCH 26/36] pinctrl: as3722: " Bartosz Golaszewski
2023-10-03 14:51 ` [PATCH 27/36] pinctrl: ingenic: " Bartosz Golaszewski
2023-10-03 14:51 ` [PATCH 28/36] pinctrl: intel: " Bartosz Golaszewski
2023-10-03 15:12 ` Andy Shevchenko
2023-10-04 7:33 ` Mika Westerberg
2023-10-03 14:51 ` [PATCH 29/36] pinctrl: st: " Bartosz Golaszewski
2023-10-04 14:41 ` Patrice CHOTARD
2023-10-03 14:51 ` [PATCH 30/36] pinctrl: remove old " Bartosz Golaszewski
2023-10-03 15:20 ` Andy Shevchenko
2023-10-04 8:49 ` Bartosz Golaszewski
2023-10-04 12:45 ` Andy Shevchenko
2023-10-03 18:34 ` kernel test robot
2023-10-03 14:51 ` [PATCH 31/36] treewide: rename pinctrl_gpio_can_use_line_new() Bartosz Golaszewski
2023-10-03 14:51 ` [PATCH 32/36] treewide: rename pinctrl_gpio_request_new() Bartosz Golaszewski
2023-10-03 14:51 ` [PATCH 33/36] treewide: rename pinctrl_gpio_free_new() Bartosz Golaszewski
2023-10-03 14:51 ` [PATCH 34/36] treewide: rename pinctrl_gpio_direction_input_new() Bartosz Golaszewski
2023-10-03 15:16 ` Andy Shevchenko
2023-10-03 19:08 ` Bartosz Golaszewski
2023-10-04 12:49 ` Andy Shevchenko
2023-10-04 12:53 ` Andy Shevchenko
2023-10-04 14:46 ` Bartosz Golaszewski
2023-10-03 14:51 ` [PATCH 35/36] treewide: rename pinctrl_gpio_direction_output_new() Bartosz Golaszewski
2023-10-03 14:51 ` [PATCH 36/36] treewide: rename pinctrl_gpio_set_config_new() Bartosz Golaszewski
2023-10-03 21:51 ` [PATCH 00/36] pinctrl: don't use GPIOLIB global numberspace in helpers Linus Walleij
2023-10-04 8:12 ` Bartosz Golaszewski
2023-10-04 8:42 ` Linus Walleij
2023-10-04 9:35 ` Andy Shevchenko
2023-10-04 9:40 ` Bartosz Golaszewski
2023-10-04 12:55 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231003145114.21637-3-brgl@bgdev.pl \
--to=brgl@bgdev.pl \
--cc=andy@kernel.org \
--cc=bartosz.golaszewski@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).